BMW M6 Oil and Lubricants
Top BMW M6 Oil and Lubricants Categories
We carry over 73 Oil and Lubricants in inventory for the BMW M6. If you’re looking for aftermarket Oil and Lubricants for your BMW M6, check out all these categories:
Essential BMW M6 Oil and Lubricants
LIQUI MOLY – HighTech Full Synthetic 5W-40 Engine Oil: Gas & Diesel, Reduces Oil And Fuel Consumption, 5 Liter (Part No.2332)
from
$49.99
Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.
Product Features:
See More
Product Features:
- All season use reliable at high and low temperatures
- Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
- An engine oil that reduces oil and fuel consumption
- Ensures fast lubrication of the engine
- Made in germany
- Low-friction formula: Leichtlauf LIQUI-MOLY Synthetic Engine Oil 5W-40 is a premium, fully synthetic engine oil that reduces oil and fuel consumption, thanks to its low-friction formula.
Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil, 5 Quart (Part No.1598B1)
from
$37.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ILSAC GF-6
- Exceeds API SP/SN PLUS/SN/SM
- GM dexos1 Gen 3
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil, 5 Quart (Part No.15906D)
from
$38.99
Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Porsche A40
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C960-A1
Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart (Part No.15980E)
from
$30.99
Castrol GTX High Mileage 5W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- MB-Approval 229.5
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15906F)
from
$38.99
Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Outstanding thermal and oxidation stability
- Excellent sludge and varnish protection
- Faster oil flow at start-up
- Volatility: Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
- Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
- Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)
from
$10.49
Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1)Based on API and ACEA volatility specifications
- Approved for BMW M-Models
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6C)
from
$10.49
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- Meets or exceeds the following specifications:
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SM
- ILSAC GF-6
Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)
from
$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.
Product Features:
See More
Product Features:
- Original Febi spare parts
- Proven OE: Febi fulfills all eligibility requirements
- High driving comfort through the use of perfectly matched materials and impeccable design
Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)
from
$26.83
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:
Product Features:
See More
Product Features:
- Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
- Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
- Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
- DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
BMW M6 Oil and Lubricants Categories
Helping You Find the Right Oil and Lubricants for Your BMW M6
You love your M6. So we’ve made it easier than ever to help you find BMW M6 Oil and Lubricants in our online catalog. Our inventory holds 73 aftermarket and OEM Oil and Lubricants for your BMW M6, ranging from $6.49 to $154.99.
We offer parts from 9 brands trusted to make quality Oil and Lubricants for your BMW M6. Before you buy, take some time to read through customer reviews. We currently have 12,627 reviews of BMW M6 Oil and Lubricants from previous customers. Some of the top rated parts include EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart with 4.9 stars and GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart with 4.8 stars.
Find your M6 Oil and Lubricants here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW M6 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Oil and Lubricants Brands for Your BMW M6
Our inventory holds Oil and Lubricants for your BMW M6 from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Castrol, Fram, and Mobil Oil, all of which can keep that BMW happy.
We have Pennzoil parts available for your BMW M6 in categories like Motor Oil. Some of the top-rated Pennzoil parts in these categories are:
from
$11.49
(2220)
Full Synthetic 5W-40 Engine Oil – Helps Extend Engine Life – 1 Qt Bottle
Engine Oil
Top-Rated Castrol Oil and Lubricants
Leading Castrol Oil and Lubricants
We carry Castrol brand parts for your BMW M6 across several catalog categories, including Motor Oil. Some of our most reviewed Castrol parts include:
FAQs for BMW M6 Oil and Lubricants
What are the most purchased Oil and Lubricants for the BMW M6?
Out of 73 Oil and Lubricants for the BMW M6, the most popular in our inventory are:
What are the top-rated BMW M6 Oil and Lubricants?
Top-rated Oil and Lubricants for your BMW M6 based on customer reviews/ratings are:
