BMW M6 Exhaust Parts

Please Select your Vehicle to See Exact Fit Parts

Essential BMW M6 Exhaust Parts

Dorman – Exhaust Gas Temperature Bung Repair Kit – Female (OE Fix) (Part No.904-533)

Exhaust Gas Temperature Bung Repair Kit - Female (OE Fix)

from

$26.99
When an EGT sensor bung rusts, the typical solution has been to replace the entire exhaust pipe. This Dorman OE FIX kit allows direct replacement of only the failed bung, with a weld-on plate if necessary for pipe repair.

Product Features:
  • Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
  • Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
  • Application specific – designed for certain BMW, Chrysler, GM, Mercedes and Volkswagen model years
  • This part has undergone vehicle try-on testing for conformance to product standards and quality
See More

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49803)

Direct-Fit OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1114.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 49803. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Manifold Catalytic Converter is designed to fit the 2006-2010 BMW M5 5.0L & 2006-2010 BMW M6 5.0L. MagnaFlow 49803 includes (5) Flange Gaskets and interchanges with OE parts 18 40 7 836 402. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$93.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Rein – Dual Clamp 45X95 (Part No.EXC0022)

Dual Clamp 45X95

from

$21.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:
  • Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
  • Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
  • Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
See More

URO Parts – Muffler Clamp (Part No.18101745427)

Muffler Clamp

from

$15.99
For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:
  • Guaranteed fitment
  • Replace your rusty or broken factory exhaust clamps with these brand-new clamps
  • Manufactured to OE dimensions for easy installation and factory exhaust system positioning
  • Quality materials resist corrosive road spray and intense exhaust heat
See More

MagnaFlow – Universal Standard Grade Federal / EPA Compliant Catalytic Converter (Part No.94007)

Universal Standard Grade Federal / EPA Compliant Catalytic Converter

from

$124.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Durable 308 stainless steel MIG welds
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
See More

Walker – CalCat CARB Universal Catalytic Converter, 2" Inlet (ID) 2"Outlet (ID) (Part No.81326)

CalCat CARB Universal Catalytic Converter, 2" Inlet (ID) 2"Outlet (ID)

from

$387.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • BUY WITH CONFIDENCE — Backed by Walker’s emissionsáandástructural integrity warranty.áVisit Walkerexhaust.com for details
See More

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.49265)

Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter

from

$731.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49265. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2006-2010 BMW M5 5.0L & 2006-2010 BMW M6 5.0L. MagnaFlow 49265 interchanges with OE parts 18 30 7 835 520, 18 30 7 836 547. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Simplifies installation with essential gaskets and hardware being included in the box
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Walker – CalCat CARB Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.81126)

CalCat CARB Universal Catalytic Converter - 2" Inlet (ID) 2" Outlet (ID)

from

$419.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
  • BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
See More

MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99209HM)

Universal HM Grade Federal / EPA Compliant Catalytic Converter

from

$179.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99209HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Durable 308 stainless steel MIG welds
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Compact, lightweight construction enables installation in confined areas, welding is required
See More

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.49264)

Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter

from

$821.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49264. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2006-2010 BMW M5 5.0L & 2006-2010 BMW M6 5.0L. MagnaFlow 49264 interchanges with OE parts 18 30 7 835 519, 18 30 7 836 547. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Durable 308 stainless steel MIG welds
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Universal OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51209)

Universal OEM Grade Federal / EPA Compliant Catalytic Converter

from

$194.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51209. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • Durable 308 stainless steel MIG welds
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
See More

MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3322037)

Universal California Grade CARB Compliant Catalytic Converter

from

$740.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322037. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • Durable 308 stainless steel MIG welds
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
See More

MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99004HM)

Universal HM Grade Federal / EPA Compliant Catalytic Converter

from

$222.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99004HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
See More

Helping You Find the Right Exhaust Parts for Your BMW M6

You love your M6. So we’ve made it easier than ever to help you find BMW M6 Exhaust Parts in our online catalog. Our inventory holds 14 aftermarket and OEM Exhaust Parts for your BMW M6, ranging from $15.99 to $1,114.99.

We offer parts from 6 brands trusted to make quality Exhaust Parts for your BMW M6. Before you buy, take some time to read through customer reviews. We currently have 16 reviews of BMW M6 Exhaust Parts from previous customers. Some of the top rated parts include Universal HM Grade Federal / EPA Compliant Catalytic Converter with 4.0 stars and Universal Standard Grade Federal / EPA Compliant Catalytic Converter with 1.0 stars.

Find your M6 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW M6 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Exhaust Parts Brands for Your BMW M6

Our inventory holds Exhaust Parts for your BMW M6 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Flowtech, Walker, and MagnaFlow, all of which can keep that BMW happy.
We have Flowtech parts available for your BMW M6 in categories like Exhaust Tips. Some of the top-rated Flowtech parts in these categories are:
Terminator; Exhaust Tips
from $93.99
(5)
Terminator; Exhaust Tips
Exhaust Chrome and Stainless Tips

FAQs for BMW M6 Exhaust Parts

What are the most purchased Exhaust Parts for the BMW M6?

Out of 14 Exhaust Parts for the BMW M6, the most popular in our inventory are:
CalCat CARB Universal Catalytic Converter - 2" Inlet (ID) 2" Outlet (ID)
from $419.99
This product is not rated
CalCat CARB Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID)
Catalytic Converters
Universal HM Grade Federal / EPA Compliant Catalytic Converter
from $222.99
This product is not rated
Universal HM Grade Federal / EPA Compliant Catalytic Converter
Catalytic Converters
Dual Clamp 45X95
from $21.99
This product is not rated
Dual Clamp 45X95
Exhaust Clamps

What are the top-rated BMW M6 Exhaust Parts?

Top-rated Exhaust Parts for your BMW M6 based on customer reviews/ratings are:
Universal HM Grade Federal / EPA Compliant Catalytic Converter
from $179.99
(1)
Universal HM Grade Federal / EPA Compliant Catalytic Converter
“Best price for parts”
Universal Standard Grade Federal / EPA Compliant Catalytic Converter
from $124.99
(1)
Universal Standard Grade Federal / EPA Compliant Catalytic Converter
“on thecat, the manufacture says its covered for 24 months, advances sYS 90 DAYS, fEDERAL GOV SAYS 5 UYEARS, sO WHO’S LYING”