BMW M3 Exhaust Parts

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability
• Designed for a leak free connection
• OE structure and design
• Built to OEM specifications
• Secure gas-tight connection

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Contains all gaskets and seals to remove and replace exhaust manifold
• Contains all gaskets and seals to remove and replace exhaust manifold

Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:

• Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
• Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
• Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
• Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.

BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers-designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:

• Exhaust accessory that enables a complete installation process
• Precise fitment
• Precise fitment
• Manufactured according to strict OE standards
• Reduced Vibration

BRExhaust insulator mounts are high-quality replacements for original equipment hangers-designed to fit right the first time. They’re conveniently available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts are manufactured from premium rubber and steel to help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability

Rein Automotive exhaust nuts are manufactured with premium materials and are direct replacements for the OE.

Product Features:

• Properly secures exhaust components.
• Direct replacement for correct fitment.
• Manufactured to strict engineering standards/specifications.

Exhaust Nut

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 50415. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 50415 includes (3) Flange Gaskets and interchanges with OE parts 11 62 7 832 063, 11 62 7 834 673. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 418004. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52925. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2015-2018 BMW M3 3.0L & 2015-2020 BMW M4 3.0L. MagnaFlow 52925 includes (2) Torca Clamps and interchanges with OE parts 18 30 7 851 178, 18 30 8 094 373. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Simplifies installation with essential gaskets and hardware being included in the box
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49800. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2008-2013 BMW M3 4.0L. MagnaFlow 49800 includes (2) Torca Clamps and interchanges with OE parts 18 30 7 840 684, 18 30 7 848 117. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

The MagnaFlow Sport Series Cat-Back Performance Exhaust System 19187 enhances your 3.0L 2015-2020 BMW with an aggressive character that is sure to help you stand out from the other BMW you encounter on the street. With its 2.5in. diameter fast-flowing mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Quad Split Rear exit with 3.5in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this dyno-proven BMW exhaust system refuses to be ignored. As such, 19187 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system’s cat-back design replaces all your import’s stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 19187 is backed by MagnaFlow’s finish warranty and limited construction warranty.

Product Features:

• High-performance lightweight design
• Dyno-proven performance
• Racing inspired sound

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated metallic black finish and a stamped aFe power logo. Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 3-1/2″ Stainless Steel Tips: Finishing off this system are Quad 3-1/2″ diameter, 304 stainless steel tips with laser-etched aFe POWER logos. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2″ to 3″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

Product Features:

• 100% Hand TIG-Welded 304 Stainless Steel Tubing
• Factory Style Exhaust Valve
• Utilizes High Flow Transverse Muffler
• Quad Gloss Black 304 Stainless Steel Tips

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated metallic black finish and a stamped aFe power logo. Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 3-1/2″ Stainless Steel Tips: Finishing off this system are Quad 3-1/2″ diameter, 304 stainless steel tips with laser-etched aFe POWER logos. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 2-1/2″ to 3″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

Product Features:

• 100% Hand TIG-Welded 304 Stainless Steel Tubing
• Factory Style Exhaust Valve
• Utilizes High Flow Transverse Muffler
• Quad Polished 304 Stainless Steel Tips

This system is constructed of 2.5 in. diameter, mandrel bent, TIG-welded, 304 stainless steel, brushed finish tubing and uses all factory mounting locations for an approximate 1 hour install time. In recent testing, this exhaust system produced 12 horsepower and 11 lbs. x ft. of torque. This unique system utilizes 3.5 in. diameter 304 polished laser etched quad tips that fit perfectly in your stock bumper cutouts. All aFe systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 2.5 in. Dia. 304 Stainless Steel
• 100% Hand TIG Welded
• Hand Brushed Finish
• Polished Quad Tips

Product Features:

• Show Quality Chrome Platinum
• Durable Black Finish
• Can Be Welded Or Clamped
• Complete The System
• Glass-Packed Resonators