BMW Ignition Wires

Ignition Wires for Your BMW

Replacing your BMW Ignition Wires shouldn’t cost you an arm and a leg. That’s why we offer plenty of options for you to choose from, making it easy to find top rated Ignition Wires brands at a fraction of the cost.

Essential BMW Ignition Wires

Bremi – BREMI Spark Plug Connector (Part No.F1010682338BRM)

BREMI Spark Plug Connector

from

$16.95
The BREMI Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Engineered to withstand extremes in temperatures
See More

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red

from

$82.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
See More

NGK – NGK Wire Set (Part No.54410)

NGK Wire Set

from

$72.99
NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.50877)

Spark Plug Wire Set

from

$894.49
Spark Plug Wire Set

NGK – Spark Plug Wire Set (Part No.54221)

Spark Plug Wire Set

from

$512.99
NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – Spark Plug Wire Set (Part No.54162)

Spark Plug Wire Set

from

$509.99
NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Bremi – Ignition Wire Set (Part No.F102015842BRM)

Ignition Wire Set

from

$235.42
The Bremi ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.51677)

Spark Plug Wire Set

from

$168.99
The engineers at Rancho have designed a NEW 4-in. Suspension System for 2017-2013 RAM 1500 4WD Gas and Eco-Diesel models. The system includes Rancho’s fully boxed welded subframe for superior strength and ductile Iron extended steering knuckles.

Product Features:
  • Patented Hi-Gloss Clear Coat Formulation with Hi-temp Silicone Jacket. Enhances abrasion resistance while providing greater protection against severe temperatures
  • Enhanced Wire Core Design matched to OE type – Low ohm, Ferrite mag, Wire wound, Silicone, or Metallic. Channels maximum voltage to spark plug and enhanced RFI protection for better overall performance
See More

NGK – Spark Plug Wire Set: Premium Tinned Copper Core, Lifetime Warranty (Part No.54324)

Spark Plug Wire Set: Premium Tinned Copper Core, Lifetime Warranty

from

$121.99
NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain European models, NGK utilizes a premium 29 gauge galvanized, tinned core wire. RFI suppression is located close to the source and thus built into NGK’s OE designed spark plug and distributor connectors and metallic resistor boots. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal.

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Bremi – Bremi Ignition Wire Set (Part No.F102064777BRM)

Bremi Ignition Wire Set

from

$86.37
The Bremi ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
See More

NGK – Coil on Plug Boot (Part No.58925)

Coil on Plug Boot

from

$40.99
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Beru – Beru Spark Plug Connector (Part No.F101059164BER)

Beru Spark Plug Connector

from

$20.32
The Beru Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Engineered to withstand extremes in temperatures
See More

Beru – Ignition Wire End Plug (Part No.F1050459136BER)

Ignition Wire End Plug

from

$15.78
The task of the wire end plug is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Prenco – Prenco Spark Plug Connector (Part No.F101059164PRN)

Prenco Spark Plug Connector

from

$12.52
Prenco Spark Plug Connectors are constructed in our Canadian facility using only premium quality components. All connectors are designed and constructed to match OE fitment and performance. Complete import/domestic coverage, OE quality, OE performance, and OE reliability.

Product Features:
  • OE-Equivalent and a direct fit application
  • High profile insulation to prevent arching.
  • Engineered to withstand extremes in temperatures
See More

Beru – Ignition Wire End Plug (Part No.F1050650296BER)

Ignition Wire End Plug

from

$9.02
The task of the wire end plug is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Beru – Beru Ignition Wire Connector (Part No.F104015834BER)

Beru Ignition Wire Connector

from

$1.64
The task of the connector is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Compare Deals on BMW Ignition Wires

Shop BMW Ignition Wires today. Advance Auto Parts carries top rated Ignition Wires brands for your BMW. Search through our selection of popular aftermarket or OEM parts, we are confident you can find the Ignition Wires deal that will fit your vehicle hassle-free.

Compare before you buy, we offer customer reviews and star ratings on all of our BMW Ignition Wires. Once you have reviewed your options and selected the deal that fits your budget, all that is left for you to decide is how to have your new BMW parts delivered. You can either have the Ignition Wires shipped directly to you or you can pick them up at your local Advance Auto Parts store.

Start shopping below and watch your savings grow!