BMW i8 Wheels and Tires

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Maximum Signal Strength, Battery Reliability.
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Meets SAE Standards J1205 and J1206
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

• OE Replacement Direct-Fit TPMS Sensor 433MHz with Metal valve (clamp-in)
• Match OE Sensors in function, design and quality.
• No programming required. Quick installation with only a relearn process needed.
• Just install sensor and relearn the vehicle.
• Have WAL technology for locating tire positon.
• Flexible valve angle 0 to 36 degrees.
• For specific models from BMW, Mini

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• The bolt stem has a dacromet coating to meet O.E.M.standards.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with a tapered seat.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• The bolt stem has a dacromet coating to meet O.E.M.standards.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with a tapered seat.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

Schrader service caps are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

• DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
• DURABLE: Caps are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
• PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• Complete TPMS valve stem assembly for OE and REDI-Sensor
• 0.453″ rim hole compatiblity
• 200 PSI maximum cold inflation pressure

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• Diamond Striped Kit for Clamp-in REDI-Sensors and many OE vehicles

Parts Kit For Honda

Wheel Hub Assembly

Valve Stem Cap

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

• 433 MHz TPMS Universal with metal valve
• Programmable – Only take 3 seconds to configure to specific application
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Covers multiple applications with one OE equivalent sensor
• Reprogrammable and Copy Clone Capable
• Have WAL technology for locating tire positon
• Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:

• Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
• Durable construction – made of quality materials for safe, reliable service
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:

• Guaranteed for life not to rust, chip, or peel.
• Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with a tapered seat.
• Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.

This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:

• Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
• Durable construction – made of quality materials for safe, reliable service
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

• MX-Sensor Components
• 4 Metal Valves
• 4 Rubber Valves
• Rubber Gasket (2×10 pcs)
• Screw Nut (2×10 pcs)
• Washer (2×10 pcs)
• Metal Valve Cap (2X10 pcs)
• Rubber Valve Cap (2X10 pcs)
• Valve Core (2X10 pcs)

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
• The bolt stem has a dacromet coating to meet O.E.M. standards.
• For use with steel or aluminum wheels with a tapered seat.

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• The bolt stem has a dacromet coating to meet O.E.M. standards.
• For use with steel or aluminum wheels with a tapered seat.

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
• PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors