BMW ActiveHybrid 3 Parts

BMW ActiveHybrid 3 Body Parts

from

$16.99

New Standard Replacement Front Bumper Cover Sensor Panel Cover, Sedan, Without M-Package

Product Features:

Sedan, Without M-Package, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$104.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$464.99

New Standard Replacement Front Bumper Cover, For F30 Sedan, Without Molding Hole, Without Park Assist, Without Park Distance Control, Without Camera, With Washers, Prime

Product Features:

For F30 Sedan, Without Molding Hole, Without Park Assist, Without Park Distance Control, Without Camera, With Washers, Paint To Match, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$594.99

New Standard Replacement Hood Panel, Sedan Models

Product Features:

Sedan Models, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Center Grille, Sedan Without Active Cruise Control Matte-Black. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Sedan Without Active Cruise Control Matte-Black, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$1.53

Door Sill Plate Clip

from

$47.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Upper Grille, Standard Line Sedan and Wagon, Chrome and Black. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Standard Line Sedan And Wagon, Chrome And Black, Made Of Poly(Acrylic Styrene Acrylonitrile)
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$1.55

Screw

from

$77.69

Engine Splash Shield

from

$177.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$71.99

New Standard Replacement Passenger Side Fender Liner, Rear Section

Product Features:

Rear Section, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

New Standard Replacement Driver Side Fender Splash Shield, M-Sport Line Sedan

Product Features:

M-Sport Line Sedan, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$49.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$1.79

Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.

from

$48.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Lower Grille Air Intake. It is Designed to Replace Your Existing Grille Air Intake. Check to Be Sure it Fits Your Vehicle.

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$16.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Rear Bumper Reflector, Sedan Models. It is Designed to Replace Your Existing Bumper Cover Reflector. Check to Be Sure It Fits Your Vehicle.

Product Features:

Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$54.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$1.53

Rivet, Plastic Spread Rivet

from

$272.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$9.29

New Standard Replacement Passenger Side Upper Front Bumper Cover Support Rail/Bracket, Sedan Models

Product Features:

Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

New Standard Replacement Driver Side Lower Front Bumper Cover Support Rail/Bracket, Sedan Models

Product Features:

Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

New Standard Replacement Passenger Side Lower Front Bumper Cover Support Rail/Bracket, Sedan Models

Product Features:

Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$9.29

New Standard Replacement Driver Side Upper Front Bumper Cover Support Rail/Bracket, Sedan Models

Product Features:

Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

BMW ActiveHybrid 3 Transmission Parts

from

$15.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$18.49

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$17.49

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$134.81

The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

from

$207.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$348.99

ABS Wheel Speed Sensor

from

$36.28

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise Vibration Control Brochure

from

$17.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$12.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

BMW ActiveHybrid 3 Automotive Accessories

from

$42.99

Autocraft Easy Fit Car Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:

Lightweight, breathable, non-abrasive fabric
Water repellent, protects against mold and mildew
Full elastic hem with reinforced grommets
Full elastic and double stitched hem to ensure a better fit
2 built-in reinforced grommets and 1 rope are included to keep your cover in place
Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

from

$128.99

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 228″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 228″ L x 60″ W x 51″ H
This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

from

$69.99

Medium weight, breathable, non-abrasive fabric
Water repellent, protects against mold and mildew
Full elastic hem with reinforced grommets
Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
2 built-in reinforced grommets and 1 rope are included to keep your cover in place
Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

from

$23.99

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

Engine heater replacement cord

from

$56.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$39.99

This license plate bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this license plate bracket matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.66

License Plate Base

from

$11.99

New Standard Replacement Front License Plate Bracket, Sedan Models, Without M-Package

Product Features:

Sedan Models, Without M-Package, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$129.99

Pants Saver Custom Fit 4pc Car floor Mat Set for BMW ActiveHybrid 3 2015 ,Tan : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your BMW ActiveHybrid 3 2015 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
Odorless and suitable for All Weather. Proudly Made In North America
Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Pants Saver Custom Fit 4pc Car floor Mat Set for BMW ActiveHybrid 3 2015 ,Black : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your BMW ActiveHybrid 3 2015 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
Odorless and suitable for All Weather. Proudly Made In North America
Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Pants Saver Custom Fit 4pc Car floor Mat Set for BMW ActiveHybrid 3 2014 ,Gray : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your BMW ActiveHybrid 3 2014 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
Odorless and suitable for All Weather. Proudly Made In North America
Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$124.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision-machined to perfectly fit your vehicle window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. (U.S. Department of Transportation) approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$23.97

NSF CERTIFIED parts bear the seal of the National Sanitation Foundation guaranteeing fit and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair. Due to precision design and exacting quality control standards, TYC replacement lamps meet SAE/DOT regulations, and are FMVSS 108 compliant. TYC NSF certified lamps further validates the quality through third party, NSF, certification. NSF certified lamps are accepted by many major insurance companies as an acceptable replacement for original equipment parts. Each TYC replacement lamp is manufactured with similar plastics materials as the original equipment and undergo rigorous testing to ensure your safely during day and night use. Your vehicle’s lamps are an essential part of your vehicle’s safety features, and can mean the difference between getting into or avoiding an accident.

Product Features:

OE-comparable harness
OE-comparable mounting provisions ensure drop-in precise fitment
Rigorous and accelerated cycling tests to ensure product service quality and durability
Special coating on the lens surface prevents hazing and fading ensuring proper illumination and operational safety
Meet or exceed DOT/SAE standards with particular consideration for photometric and safety compliance

from

$23.77

OE-comparable harness
OE-comparable mounting provisions ensure drop-in precise fitment
Rigorous and accelerated cycling tests to ensure product service quality and durability
Special coating on the lens surface prevents hazing and fading ensuring proper illumination and operational safety
Meet or exceed DOT/SAE standards with particular consideration for photometric and safety compliance

from

$99.99

The Rightline Gear Car Top Duffle Bag is a 100% waterproof gear bag that you can pack, strap to the roof of your vehicle, transport, and then carry wherever you need to go. Attach (1) to (4) Duffle Bags to vehicles WITH or WITHOUT a roof rack. Each bag comes with a removable shoulder strap that can be stored in the bag’s zippered side pocket when not in use. The bag is made from tough PVC Coated Mesh that is re-enforced for strength and UV protected. The Car Top Duffle Bag defines travelling efficiency!

Product Features:

Capacity: 4.3 cu ft
Dimensions: 36″ L x 16″ W x 13″ H
100% Waterproof with welded seams, urethane coated zippers, and a hook-&-loop-close zipper cover
Designed to be used on any size vehicle, WITH or WITHOUT a roof rack
Includes: bag, shoulder strap, (2) attachment straps, (4) Car Clips, and set up guide
Includes: duffle bag, (2) nylon straps, (4) Car Clips, and complete set up guide

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$89.99

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

Dimensions: 36″ L x 32″ W x 15″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
Weatherproof + with welded seams and a urethane coated zipper
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

BMW ActiveHybrid 3 Interior Products

from

$106.99

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$112.99

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$138.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$1201.99

from

$181.99

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family

from

$251.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$251.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$261.99

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$19.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

BMW ActiveHybrid 3 Engine Parts

from

$2.93

Fuel Pump Seal – Mec

from

$156.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$102.26

Camshaft Position Sensor

from

$3.14

Valve Keeper

from

$25.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.49

OIL SENSOR O-RING

from

$7.87

Oil Level Sender O-R

from

$284.13

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$82.99

Redi-Sleeve

from

$6.82

Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.

Product Features:

Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
Made to specific sizes and standards to ensure a proper fit
Designed and constructed to strict engineering quality standards

from

$2.96

Oil Cooler Seal

from

$78.50

KS crankshaft main bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS main bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:

Original Equipment Manufacturer
Maximum Load-Bearing Capacity
Low Wear and Friction
Advanced Surface Coatings

from

$49.99

Rein turbo oil feed pipes are manufactured with premium ContiTech OE quality hose material designed to withstand the demands of automotive turbo cooling systems. Rein turbo oil feed pipes are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in turbo cooling systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both feed and return pipes together ensures optimal performance and safety levels.

from

$36.58

Valve Stem Seal Kit

from

$19.37

Camshaft Follower

from

$16.10

The Febi Oil FIller cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$154.16

Camshaft Solenoid Ad

from

$26.29

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$55.32

WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:

High-quality design and engineering for perfect performance
Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

from

$128.10

Timing Chain

from

$35.91

Crankshaft Seal

from

$31.58

Crankshaft Seal

from

$34.99

The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.

Product Features:

Thermostat Hose Flange Repair Kit
Thermostat Hose Flange Repair Kit
The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.
Upgraded replacement – this thermostat hose flange repair kit includes a stronger aluminum flange to prevent future leaks
Convenient kit – comes with flange, O-ring and clamp for complete repair of failed coolant junction

Looking for the best BMW ActiveHybrid 3 aftermarket replacement parts? Replacing worn and broken parts on your BMW ActiveHybrid 3? Check out our online catalog to find the best selection of aftermarket BMW ActiveHybrid 3 parts as well as real user reviews on BMW ActiveHybrid 3 replacement parts. Make an informed decision about every component you add to your ActiveHybrid 3.

At Advance Auto, we’ve got you covered when it comes to getting your BMW ActiveHybrid 3 in tip top condition. We’ve got over 670 BMW ActiveHybrid 3 parts to choose from in popular categories like Body Parts, Transmission Parts and Automotive Accessories. If you’re looking for the best prices, try searching our BMW ActiveHybrid 3 parts catalog to compare OEM and aftermarket parts for your BMW ActiveHybrid 3.

Whether you need BMW ActiveHybrid 3 body parts, interior components, or custom BMW ActiveHybrid 3 parts you can find them online at Advance Auto. Want to order your Interior Products online? Or maybe you need your BMW Engine Parts same day? No problem, you can pick up ActiveHybrid 3 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used BMW ActiveHybrid 3 parts has never been easier.

Advance Auto customers frequently search for the following types of BMW ActiveHybrid 3 auto parts. Check out customer reviews and ratings, and compare prices on the following BMW ActiveHybrid 3 parts:

People also search Advance Auto for these popular years of the BMW ActiveHybrid 3:

BMW ActiveHybrid 3 Parts

KAI – Front Bumper Cover Sensor Panel Cover, For Sedan, Without M-Package (Part No.BM1087105)

Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.4517HRSG)

KAI – Front Bumper Cover, Without Molding Holes, Prime (Part No.BM1000260)

KAI – Hood Panel (Part No.BM1230136)

KAI – New Standard Replacement Front Bumper Center Grille, Sedan Without Active Cruise Control Matte-Black (Part No.BM1036137)

BBR Automotive – Door Sill Plate Clip (Part No.O90961334927BBR)

KAI – New CAPA Certified Standard Replacement Driver Side Upper Grille, Chrome And Black (Part No.BM1200232C)

Vaico – Screw (Part No.Y20031145109VCO)

Aftermarket – Engine Splash Shield (Part No.Q1022939787AFT)

Dorman – Integrated Door Lock Actuator (Part No.937-802)

KAI – Fender Liner (Part No.BM1249132)

KAI – Driver Side Front Fender Splash Shield, M-Sport Line Sedan Made Of ABS (Part No.BM1250125)

StrongArm – Trunk Lift Support: 14.84" Ext Length, 5.35" Travel, 30 Lbs of Force, 1 Pk (Part No.E6018)

Vaico – Door Panel Clip, Natural (Part No.O3030413227VCO)

KAI – New Standard Replacement Lower Grille Air Intake (Part No.BM1206101)

KAI – Passenger Side Rear Bumper Reflector, For Sedan Models (Part No.BM1185100)

Burco – Side View Replacement Mirror (Part No.5370)

Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001400703VCO)

Carquest Premium – Door Window Switch (Part No.WSC3043)

KAI – Passenger Side Upper Front Bumper Cover Support Rail/Bracket, Sedan (Part No.BM1043104)

KAI – Bumper Cover Support Rail (Part No.BM1042105)

KAI – Bumper Cover Support Rail (Part No.BM1043105)

KAI – Bumper Cover Support Rail (Part No.BM1042104)

National – Multi Purpose Seal (Part No.710487)

National – Multi Purpose Seal (Part No.710939)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

ATE – ABS Speed Sensor (Part No.N60302125681ATE)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC3974)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4368)

Corteco – Transmission Mount (Part No.J6000426203CFW)

National – Multi Purpose Seal (Part No.710671)

National – Multi Purpose Seal (Part No.710780)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

AutoCraft – Car Cover, Grey, Fits Sedans 15′ 1"-16′ 8", Breathable, Non-Abrasive, Dustproof (Part No.AC213)

Budge – Rain Barrier Car Cover, Gray, Size 4: Fits Cars up to 228" Long, Outdoor Protection, Water Resistant, Breathable (Part No.RSD-4)

AutoCraft – Car Cover, Blue 3 Layers, Fits Sedans 15′ 1"-16′ 8", Medium-Duty, Water Resistant, Outdoor Use (Part No.AC61)

Kat’s – Engine Heater; Replacement Cord (Part No.28400)

Kat’s – Freeze Plug Heater (Part No.11431)

Dorman – Help – BMW License Plate Bracket (Part No.68199)

Dorman – License Plate Base (Part No.O1090958959DOR)

KAI – License Plate Bracket (Part No.BM1068121)

PantsSaver – Custom Fit Automotive Floor Mats fits BMW ActiveHybrid 3 2015 Front & 2nd Seat Car Mats Tan (Part No.5511153)

PantsSaver – Custom Fit Automotive Floor Mats fits BMW ActiveHybrid 3 2015 Front & 2nd Seat Car Mats Black (Part No.5511151)

PantsSaver – Custom Fit Automotive Floor Mats fits BMW ActiveHybrid 3 2014 Front & 2nd Seat Car Mats Gray (Part No.5511142)

WeatherTech – Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 4 (Part No.82706)

TYC – Side Reflector (Part No.P9026443336TYC)

TYC – Side Reflector (Part No.P9026443335TYC)

Rightline Gear – Car Top Duffle Bag (Part No.100D90)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Rightline Gear – Range Jr Car Top Carrier (Part No.100R50)

Dashmat – Velourmat Dashboard Cover Velour Material – Cocoa (Part No.71976-00-26)

Dashmat – SuedeMat Dashboard Cover Faux-suede Material – Black (Part No.81976-00-25)

Dashmat – SuedeMat Dashboard Cover Faux-suede Material – Beige (Part No.81976-00-23)

Dashmat – Velourmat Dashboard Cover Velour Material – Black (Part No.71976-01-25)

Dashmat – Velourmat Dashboard Cover Velour Material – Grey (Part No.71976-00-47)

Carquest Premium – Ignition Switch (Part No.CSC3954)

Carquest Premium – Combination Switch (Part No.SAN3574)

WeatherTech – Bucket Seat With Headrest, Polycotton Twill, Cocoa, Single, Semi-Custom (Part No.SPB002CO)

WeatherTech – High Back Rear Bench Seat, Polycotton Twill, Charcoal, Single, Uses Headrests (Part No.DE2021CH)

WeatherTech – High Back Rear Bench Seat, Polycotton Twill, Tan, Single (Part No.DE2021TN)

WeatherTech – High Back Rear Bench Seat, Polycotton Twill, Gray, Single (Part No.DE2021GY)

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

Bosch – Fuel Pump Seal – Mec (Part No.E3039250029BOS)

Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSA3664)

VDO – Camshaft Position Sensor (Part No.A4015250085VDO)

TRW – Valve Keeper (Part No.A4070774061TRW)

National – Multi Purpose Seal (Part No.229010)

Ajusa – OIL SENSOR O-RING (Part No.16078650)

Elring – Oil Level Sender O-R (Part No.A6081319324ELR)

Elring – Cylinder Head Gasket (Part No.A8100406072ELR)

Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 46149)

National – Redi-Sleeve (Part No.99353)

Dorman – Engine Oil Drain Plug Gasket (Part No.A6120831514DOR)

CRP – Oil Cooler Seal (Part No.A631050754CRP)

Kolbenschmidt – Main Bearing Set (Part No.A20101807058KS)

Rein – Turbo Oil Feed Pipe (Part No.TFP0310)