from

$3.04

Nut

from

$84.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$24.29

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing
Designed And Built Specifically For Bows

from

$52.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Matches Original Equipment design specifications
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance
All bearings included are produced by an Original Equipment manufacturer ensuring the highest quality and performance

from

$55.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
UV resistant
No Squeak

from

$239.40

The Lemfoerder Control Arm Strut is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry. Lemfoerder uses only OE style bushings and ball joints minimizing road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
OE Bushings and Ball Joints
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$59.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications
R-Series (RK) products are the right choice for value-driven repair

from

$52.60

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$56.78

The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
OE style mounts and fasteners
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$419.99

Non Elec. Air Strut

from

$122.72

Headlight Level Sensor

from

$214.77

Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$15.46

The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$201.99

This air compressor solenoid valve unit, also known as an air compressor valve block, directly replaces the original unit on specific vehicles. It restores proper suspension performance when the original unit fails.

Product Features:

Direct replacement – this air suspension solenoid valve unit directly replaces the original compressor valve block on specific vehicles
Complete repair – essential part of a complete air suspension repair solution
Restores performance – prevents suspension sagging, excessive compressor operation and other component failures
Quality assured – part has undergone lab and materials testing to ensure quality and performance

from

$54.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$1185.04

Suspension Compresso

from

$48.05

SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:

SACHS Service Kits help to prolong the life and performance of the shock or strut.
Always replace your Service kits in pairs.
Are built with design and quality that matches or exceeds OE quality

from

$233.23

The Lemfoerder Control Arm Strut is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry. Lemfoerder uses only OE style bushings and ball joints minimizing road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
OE Bushings and Ball Joints
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$264.78

Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$304.82

SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance and quality standards. SACHS products have the best dampening characteristics with an application-tu

Product Features:

TwinTube Design

from

$6.29

POWER STEERING FLUID

from

$46.49

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily