BMW 650i xDrive Fuel and Emissions Systems

Essential BMW 650i xDrive Fuel and Emissions Systems

Vemo – Relay (Part No.P2020309952VMO)

Relay

from

$26.12
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Bosch – High Pressure Sensor (Part No.0261545071)

High Pressure Sensor

from

$89.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:
  • Bosch OE quality pressure sensors for accurate measurements
  • Bosch OE quality pressure sensors for long term stability
  • Bosch OE quality pressure sensors with a short response time
  • Bosch OE quality pressure sensors with improved media resistance
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE2438)

Vapor Canister Purge Solenoid

from

$83.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Mass Air Flow (MAF) Sensor (Part No.0280218270)

Mass Air Flow (MAF) Sensor

from

$165.99
Bosch is the actual OE manufacture, plus or minus 5% deviation from OE specification can set a check engine light.

Product Features:
  • OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
  • 100% new product
  • Not re-manufactured or rebuilt
  • Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
  • Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
  • Can provide up to 20 percent better fuel consumption
See More

FAE – Boost Pressure Senso (Part No.B40803270331FAE)

Boost Pressure Senso

from

$148.18
Boost Pressure Senso

Burgaflex – Breather Hose (Part No.B2010655563BUR)

Breather Hose

from

$116.29
Breather Hose

Rein – OE Quality Automotive Fuel Tank Cap (Part No.E2010379639RIN)

OE Quality Automotive Fuel Tank Cap

from

$42.91
This is an OE quality fuel cap. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from high quality materials
  • Right fit the first time
  • O ring is black in color
  • For European vehicles
See More

Vaico – Fuel Pump Control Mo (Part No.E3006849427VCO)

Fuel Pump Control Mo

from

$490.11
Fuel Pump Control Mo

Bosch – Oxygen Sensor (Part No.C50101539658BOS)

Oxygen Sensor

from

$124.82
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 18.8" Long, Heated, Direct Fit (Part No.24365)

Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 18.8" Long, Heated, Direct Fit

from

$196.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS067)

Fuel Injector Seal Kit

from

$6.49
CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials.
  • Services one injector.
See More

Bosch – Fuel Injector Seal (Part No.C1010406080BOS)

Fuel Injector Seal

from

$6.19
Fuel Injector Seal

Bosch – Direct Injection Fue (Part No.E3027418168BOS)

Direct Injection Fue

from

$576.45
Direct Injection Fue

Pierburg – Electric Fuel Pump Assembly (Part No.E3001377433APG)

Electric Fuel Pump Assembly

from

$389.31
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles

Product Features:
  • Made in Europe – 100% from OE factories and thus OE Standard
  • Optimal hot fuel supply properties and low noise level
  • Online Service and Product Information
  • Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Multi-Purpose Wire Connector with Leads

from

$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Dorman – Fuel Vapor Leak Detection Pump (Part No.310-504)

Fuel Vapor Leak Detection Pump

from

$162.99
This evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications.
  • Restores functionality – reliable replacement for an original part that has clogged or failed due to emissions control system damage.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Vapor Canister (Part No.CPN2585)

Vapor Canister

from

$1375.99
Vapor Canister

Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)

GDI SEAL TOOL KIT

from

$119.99
GDI SEAL TOOL KIT

Original Equipment – AMBIENT TEMP SENSOR (Part No.P4025449414OEA)

AMBIENT TEMP SENSOR

from

$53.39
AMBIENT TEMP SENSOR

INA – Fuel Pump Tappet (Part No.E3013418177INA)

Fuel Pump Tappet

from

$41.35
Fuel Pump Tappet

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Bosch – Fuel Pressure Sensor (Part No.C3001776437BOS)

Fuel Pressure Sensor

from

$110.86
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:
  • Built-in circuit protection to ensure your electronics and computer systems stay unharmed
  • High reliability of pressure sensing proved in gasoline and diesel direct injection systems
  • Sturdy design, vibration resistant and thermal stability
See More

Bosch – Port Fuel Injector: For Enhanced Engine Performance (Part No.C1000427370BOS)

Port Fuel Injector: For Enhanced Engine Performance

from

$130.50
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.

Product Features:
  • Low-pressure systems are less complex and more affordable than high-pressure systems
  • Robust combustion process tolerates lower-quality fuel
  • Maintenance-friendly design reduces the overhead for system diagnostics
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1499)

Manifold Absolute Pressure Sensor (MAP)

from

$129.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Helping You Find the Right Fuel and Emissions Systems for Your BMW 650i xDrive

You love your 650i xDrive. So we’ve made it easier than ever to help you find BMW 650i xDrive Fuel and Emissions Systems in our online catalog. Our inventory holds 65 aftermarket and OEM Fuel and Emissions Systems for your BMW 650i xDrive, ranging from $6.19 to $1,375.99.

We offer parts from 20 brands trusted to make quality Fuel and Emissions Systems for your BMW 650i xDrive. Before you buy, take some time to read through customer reviews. We currently have 1,274 reviews of BMW 650i xDrive Fuel and Emissions Systems from previous customers.

Find your 650i xDrive Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 650i xDrive part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your BMW 650i xDrive

Our inventory holds Fuel and Emissions Systems for your BMW 650i xDrive from 20 trusted brands. You’ll find OEM and aftermarket parts from brands like Bosch, Carquest Premium, and Delphi, all of which can keep that BMW happy.
We have Rein parts available for your BMW 650i xDrive in categories like Gas Caps. Some of the top-rated Rein parts in these categories are:
Cap-Fuel
from $34.99
(2)
Cap-Fuel
Gas Caps