BMW 645Ci Engine Parts

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Anchor 9719 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2004-2010
• Weight approx: 3 Lbs
• Hydraulic

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
• Able to be used in applications with minimal lubrication.
• Thermal properties with a wide range of operating temperatures.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

• Guaranteed fitment
• Manufactured to OE dimensions for proper clearances and easy bolt-on installation
• High-strength alloy aluminum or stamped-steel construction ensures warp-free seal between oil pan and engine block
• Durable surface coating resists rust (steel models)
• Quality control at each step of production

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Rein OE Quality valve covers are designed and manufactured to be direct replacements for OE units. Rein valve covers have identical dimensions as genuine valve covers. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.

Product Features:

• Direct Replacement.
• Supplied with installation hardware for easy replacement.
• Manufactured from high quality materials to ensure a long service free life.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Meets or exceeds original equipment specifications.
• Resistant to high and low temperatures and achieve a secure seal with low tightening forces.

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

• Guaranteed fitment
• Manufactured to OE valley pan cover dimensions for proper clearances and easy installation
• High-strength construction ensures warp-free seal between cover and engine block
• Quality materials resist corrosion due to heat and toxic coolant exposure

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• Application specific
• SUV and rear air applications
• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• Application specific
• SUV and rear air applications

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function