BMW 550i Engine Parts

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
• Complete assembly – includes replacement pan and drain plugs to match original components
• Durable design – high-strength coating prevents future corrosion
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Rein turbo hoses are manufactured with premium OE quality material designed to withstand the high demands of automotive power turbo systems. Rein turbo hoses are resistant to excessive heat, oil and ozone factors that breakdown rubber and cause premature failure.

Product Features:

• Rein turbo hoses are manufactured with premium OE quality material to offer maximum protection from premature failures.
• Rein turbo hoses are designed as direct-fit replacements to ensure trouble-free installation.
• Rein turbo hoses come complete with hardware and seals when necessary to save installation time and additional costs.
• Replace leaking or otherwise faulty hoses with Rein premium components to restore your vehicle to safe and optimal performance levels.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This turbocharger oil return tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this turbocharger oil return tube is designed to match the fit and function of the original tube on specified applications
• Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion or seal degradation
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Rein Automotive OE quality expansion tank kits, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life

Product Features:

• Includes sensor (if applicable) and Cap
• Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
• Resistant to cracking and wear from heat cycles preventing coolant loss
• Direct fitment allows easy installation

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

The Original Equipment Engine Coolant Temperature Sensor is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.

Product Features:

• Designed to tight tolerances to ensure proper sealing.
• Rein Oil Drain Plugs are coated for high corrosion resistance.
• Designed and constructed to strict engineering quality standards.
• Includes copper sealing gasket.

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
• Thermoplastic housing withstands heat stress for enhanced durability
• Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
• Neodymium magnet produces max high voltage output at all speeds

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
• Able to be used in applications with minimal lubrication.
• Thermal properties with a wide range of operating temperatures.

This turbocharger boost solenoid is designed to match the fit and function of the original solenoid on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this turbocharger boost solenoid is designed to match the fit and function of the original part on specified applications
• Restores functionality – reliable replacement for an original part that has failed due to corrosion, heat or vibration
• Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

• All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
• Produced by an Original Equipment supplier
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
• High corrosion resistance

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Not impacted by temperature changes and provide robust, long-lasting sensor protection
• Designed digital output for maximum signal to noise ratio
• All parts used in the manufacture process are Delphi validated
• Not impacted by temperature changes and provide robust, long-lasting sensor protection