BMW 545i Wheels and Tires

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

• Engineered for OE fit, form and function
• Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
• High-quality steel and surface treatments for proper fit and endurance
• Roll-form bearing design applies exact preload for increased durability (where applicable)
• Bearings and seals are engineered to the requirements of each specific vehicle application
• Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

Product Features:

• Innovative roll form design ensures consistent and optimal preload.
• Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
• Engineered to overcome problems and deliver smooth, reliable performance.
• MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.

Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• Each kit includes a fully assembled Schrader rubber valve assembly and mounting screw
• Valve cores are designed to OE specifications
• Replacement components in Schrader TPMS service kits are sensor specific
• OE fit, form, and function
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• Replacement components in Schrader TPMS service kits are sensor specific
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
• OE fit, form, and function
• Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:

• Guaranteed for life not to rust, chip, or peel.
• Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with a tapered seat.
• Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.

This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:

• Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
• Durable construction – made of quality materials for safe, reliable service
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

Product Features:

• Black
• Adjustable 0-36 degrees
• High quality coating to prevent corrosion
• Only one tool needed (35 in-lbs)

Product Features:

• Titanium
• Adjustable 0-36 degrees
• High quality coating to prevent corrosion
• Only one tool needed (35 in-lbs)

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN – Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

These hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.

Product Features:

• Fitment and function are ensured by precision machining and measurements with rigorous testing and inspections of material and components
• Designed to meet stringent fatigue requirements in order to reduce premature failure
• Reinforced seal design material allows for optimal performance in harsh environments
• Engineered to undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability
• Pre-installed speed sensors automatically sync to the vehicle’s anti-lock braking system and provide accurate speed data (where applicable)
• Brand may vary by location

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
• The bolt stem has a dacromet coating to meet O.E.M. standards.
• For use with steel or aluminum wheels with a tapered seat.

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

• Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
• Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
• Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• The bolt stem has a dacromet coating to meet O.E.M.standards.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
• Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• The bolt stem has a dacromet coating to meet O.E.M.standards.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
• Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 18 X 8, 15 Tri Spokes, 5 Lug, 120MM Bolt Pattern, Silver. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle.

Product Features:

• 18 X 8, 15 Tri Spokes, 5 Lug, 120MM Bolt Pattern, Silver, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Lug Nuts And Center Cap Not Included
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatiblity
• 200 PSI maximum cold inflation pressure

Product Features:

• Silver
• Adjustable 0-36 degrees
• High quality coating to prevent corrosion
• Only one tool needed (35 in-lbs)

Complete Valve Kit for Huf Baolong Electronics (BH Sens) OE and Aftermarket sensors.

Product Features:

• OE quality metal valve
• Valve, plastic cap, core, grommet, and shear collar hex nut are all included.
• Corrosion protection.
• Flexible valve angle 0 to 36 degrees.
• Flexible Valve Angle 0 To 36 Degrees.

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• OE fit, form, and function
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Sensor comes fully assembled and ready to install
• Ready out of the box
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Easy to program and covers the majority of vehicles on the road in North America
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Rubber valve can be replaced with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Engineered and manufactured to OEM design and quality specifcations
• Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Sensor comes fully assembled and ready to program and install
• Easy to program and covers the majority of vehicles on the road in North America

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Maximum Signal Strength, Battery Reliability.
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Meets SAE Standards J1205 and J1206
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

• Titan Grey Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

• Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Reprogrammable and Copy Clone Capable
• Full WAL and PAL technology support for auto-locate.
• Rubber valve included.