BMW 528i xDrive Engine Parts

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles
• Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
• Durable construction – made from quality components to ensure reliable performance and long service life
• Quality assured – backed by a team of product engineers based in the United States

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• Application specific
• SUV and rear air applications

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
• SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

Turbo Diverter Valve, Engineered for Enhanced Efficiency and Responsiveness

Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:

• Reduce installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants

Fuel Pump Gasket – M

The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.

Product Features:

• Thermostat Hose Flange Repair Kit.
• Thermostat Hose Flange Repair Kit.
• The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.
• Upgraded replacement – this thermostat hose flange repair kit includes a stronger aluminum flange to prevent future leaks
• Convenient kit – comes with flange, O-ring and clamp for complete repair of failed coolant junction

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Eccentric Shaft Sens

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Low Wear and Friction
• Advanced Surface Coatings

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Cylinder Head Bolt Set

Crankshaft Seal

Rocker Arm

Timing Chain

Intake Man. Gasket S

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 10-18;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2010-2018
• Weight approx: 3 Lbs
• HYDRAULIC
• RUBBER BUMPER

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

MAHLE Original piston rings lead the way in ring technology and innovation for the Aftermarket – after all, MAHLE is the largest manufacturer of piston rings in the world. MAHLE Original rings are at the forefront of light vehicle piston ring technology. Extensive OE connections mean that MAHLE Original rings have the technological edge. Things like the CP-20 oil ring, narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings and coated compression rings for diesels all came from the OE. The MAHLE Original performance line proves time and again that it should be the ring of choice under every hood – regardless of the application. Grey cast iron or ductile iron was traditionally the material of choice for automotive applications – today, steel is preferred over iron by more and more engine builders. Steel compression ring technology has been used in heavy-duty applications for over 30 years. That know-how has become essential to the design and engineering of today’s automotive engines. Steel piston rings offer higher tensile strength, higher yield strength, greater fatigue life, and greater hardness while still offering a lower ring mass. These factors lead to better stress resistance, reduced groove pound-out, longer service life, better conformability, superior oil economy, and improved blow-by control while still lowering friction.

Product Features:

• Ease of installation makes them the premier choice for rebuilders everywhere.
• The CP-20 rings can withstand the harsh operating environments in today’s engines.
• The CP-20 consists of a barrel-faced top compression ring for better seal and quicker break-in, a reverse torsional twist second ring for better oil control
• The CP-20 design oil ring that is easier to install
• Chemically polished for better oil drain-back
• A 20 degree ear angle to ensure side seal around the ring