BMW 528i Drivetrains
Top BMW 528i Drivetrains Categories
We carry over 80 Drivetrains in inventory for the BMW 528i. If you’re looking for aftermarket Drivetrains for your BMW 528i, check out all these categories:
Essential BMW 528i Drivetrains
Rein – CV Boot Kit (Part No.BKN0172)
from
$15.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
GKN Drivetech – Axle Assembly, New: Optimized for Performance, Reliability, and Fuel Efficiency (Part No.K4000299615GKN)
from
$389.42
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
National – Bearings (Part No.206-L)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Febi – Hub Mounting Bolt (Part No.K7036311174FEB)
from
$7.25
Hub Mounting Bolt
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
SKF – Input Shaft Seal (Part No.J1156198776SKF)
from
$21.75
Input Shaft Seal
National – Bearings (Part No.305)
from
$40.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.00
DIFFERENTIAL DRAIN P
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.82
Differential Side Cover Seal, 90 x 44 x 10
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Rear Drive Shaft: Adjustable (Part No.946-977)
from
$1272.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)
from
$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).
Product Features:
See More
Product Features:
- Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
- Formulated to help prevent gear wear and protect against rust and corrosion
- Formulated to deliver enhanced protection against deposits
- Helps provide better protection during extreme operating conditions
Rein – Drive Shaft Mount Assembly (Part No.AVS0438)
from
$29.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- Recommended to replace bearing and mount together to ensure best performance
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6131)
from
$77.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 97-00;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1997-2000
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 1.80 INCH / 46 MM
- MOUNT WIDTH: 6.30 INCH / 160 MM
- STYLE: ROUND FRAME
- WITH WINGS
Driveworks – Oil Seal (Part No.S-223802)
from
$6.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAG US – SHAFT SEAL (Part No.SS2835)
from
$15.99
SHAFT SEAL
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-985)
from
$49.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Febi – Axle Shaft Nut (Part No.K4030133883FEB)
from
$13.23
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
FAG – Wheel Hub Assembly (Part No.K7001236760FAG)
from
$187.54
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle. The FAG wheel hub assembly is a highly integrated unit with flanges for the brake disc, wheel and knuckle, which allow the highest possible running accuracy. Integrated speed encoders generate the signals required for steering the vehicle (ABS/ESP). The bearing clamping force is applied and controlled by FAG via an orbital formed shoulder.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
- Lubricated with specially developed greases
- Optimized sealing systems
Driveworks – Camshaft Seal (Part No.S-99139)
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102046068FEB)
from
$147.68
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)
Dorman – Driveshaft Flex Coupler (Part No.935-403)
from
$55.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – CV Joint Boot Kit (Part No.K6010240710RIN)
from
$23.30
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
BMW 528i Drivetrains Categories
Helping You Find the Right Drivetrains for Your BMW 528i
You love your 528i. So we’ve made it easier than ever to help you find BMW 528i Drivetrains in our online catalog. Our inventory holds 80 aftermarket and OEM Drivetrains for your BMW 528i, ranging from $4.79 to $1,272.99.
We offer parts from 25 brands trusted to make quality Drivetrains for your BMW 528i. Before you buy, take some time to read through customer reviews. We currently have 874 reviews of BMW 528i Drivetrains from previous customers. Some of the top rated parts include Type TLS Automatic Transmission Fluid – 1 qt with 4.5 stars and Shaft Repair Sleeve with 5.0 stars.
Find your 528i Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 528i part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your BMW 528i
Our inventory holds Drivetrains for your BMW 528i from 25 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Royal Purple, and National, all of which can keep that BMW happy.
We have Royal Purple parts available for your BMW 528i in categories like Differentials. Some of the top-rated Royal Purple parts in these categories are:
from
$12.99
(82)
High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT
Differential Oil
from
$25.99
(57)
MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT
Differential Oil
FAQs for BMW 528i Drivetrains
What are the most purchased Drivetrains for the BMW 528i?
Out of 80 Drivetrains for the BMW 528i, the most popular in our inventory are:
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
What are the top-rated BMW 528i Drivetrains?
Top-rated Drivetrains for your BMW 528i based on customer reviews/ratings are:
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
from
$39.49
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
