BMW 525i Transmission Parts
Top BMW 525i Transmission Parts Categories
We carry over 124 Transmission Parts in inventory for the BMW 525i. If you’re looking for aftermarket Transmission Parts for your BMW 525i, check out all these categories:
Essential BMW 525i Transmission Parts
APA/URO Parts – AT Drain Plug (Part No.J5032270322APA)
from
$6.57
AT Drain Plug
Carquest Premium – Neutral Safety Switch (Part No.CSC3714)
from
$388.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MTC – Shift Rod Pin (Part No.J109877410MTC)
from
$2.07
Shift Rod Pin
ATP – AT MASTER REPAIR KIT (Part No.NM-37)
from
$811.99
AT MASTER REPAIR KIT
Rein – Mounting Plate (Part No.EPP0135)
from
$69.99
Rein Automotive OE quality expansion tank mounting plates, install, fit and perform the way the original manufacturer intended. These mounting plates are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
ATP – Shift Solenoid (Part No.EE-5)
from
$129.99
Shift Solenoid
MTC – Selector Rod Joint (Part No.J1081101623MTC)
from
$22.37
Selector Rod Joint
ZF – Automatic Transmission Speed Sensor (Part No.J5052425623ZF)
from
$76.33
Automatic Transmission Speed Sensor
Rein – Aluminum Bolt (Part No.HWB0001)
from
$9.99
Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.
Product Features:
See More
Product Features:
- Made of high quality materials.
- Comes with torque specs to make sure each bolt is properly tighten
- Manufactured to strict engineering standards/specifications.
- Aluminum bolts are torque to yield and must be replaced once they are released.
Anchor – Transmission Mount: Left, 1 Piece (Part No.9104)
from
$15.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BMW 91-95;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1991-1995
- Weight approx: 1 Lbs
- PART GROUP: 9100, 9104
Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)
Driveworks – Tapered Roller Bearing (Part No.S-LM-503349A)
Rein – Bushing (Part No.AVB0485)
from
$7.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.
Felpro – Transmission Oil Pan Gasket (Part No.TOS 18704)
from
$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Rein – Aluminum Bolt Kit (Part No.HWK0002)
from
$15.99
Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.
Product Features:
See More
Product Features:
- Includes all the bolts needed to complete the job.
- Comes with torque specs to make sure each bolt is properly tighten
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Aluminum bolts are torque to yield and must be replaced once they are released.
National – Multi Purpose Seal (Part No.710487)
from
$15.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
ZF – Automatic Transmission Solenoid Kit with Solenoid Valves (Part No.J4014947742ZF)
from
$481.54
Automatic Transmission Solenoid Kit with Solenoid Valves
ZF – AT Oil Pan Screw (Part No.J50451878876ZF)
from
$10.30
AT Oil Pan Screw
Anchor – Transmission Mount: Right, Left, Rear, 1 Piece (Part No.9096)
from
$27.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BMW 88-19;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1988-2019
- Weight approx: 1 Lbs
National – Multi Purpose Seal (Part No.710545)
from
$3.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-6712NA)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT CONTR SOLENOID (Part No.EE-6)
from
$107.99
AT CONTR SOLENOID
National – Oil Seal (Part No.710619)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design Type: Spring Loaded; Multi-Lip
- Good abrasion and dry running capability
- High swell in hydrocarbon fluids
- Temperature range: -30°F to 325°F; -34°C to 163°C
- Delivers reliable performance for every type of repair
BMW 525i Transmission Parts Categories
Helping You Find the Right Transmission Parts for Your BMW 525i
You love your 525i. So we’ve made it easier than ever to help you find BMW 525i Transmission Parts in our online catalog. Our inventory holds 124 aftermarket and OEM Transmission Parts for your BMW 525i, ranging from $1.62 to $5,637.99.
We offer parts from 33 brands trusted to make quality Transmission Parts for your BMW 525i. Before you buy, take some time to read through customer reviews. We currently have 294 reviews of BMW 525i Transmission Parts from previous customers. Some of the top rated parts include Automatic Transmission Solenoid Kit with Solenoid Valves with 3.0 stars and Transmission Oil Pan Gasket with 1.0 stars.
Find your 525i Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 525i part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Transmission Parts Brands for Your BMW 525i
Our inventory holds Transmission Parts for your BMW 525i from 33 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, National, and Driveworks, all of which can keep that BMW happy.
We have Behr parts available for your BMW 525i in categories like Transmission Cooler and Parts. Some of the top-rated Behr parts in these categories are:
Top-Rated National Transmission Parts
Leading National Transmission Parts
We carry National brand parts for your BMW 525i across several catalog categories, including Transmission Seals. Some of our most reviewed National parts include:
FAQs for BMW 525i Transmission Parts
What are the most purchased Transmission Parts for the BMW 525i?
Out of 124 Transmission Parts for the BMW 525i, the most popular in our inventory are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
from
$17.49
This product is not rated
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
Transmission Oil Pan Gaskets
What are the top-rated BMW 525i Transmission Parts?
Top-rated Transmission Parts for your BMW 525i based on customer reviews/ratings are:
from
$22.49
(1)
Transmission Oil Pan Gasket
“This is one of those cases where an image would have been amazingly helpful.
The gasket is listed as the pan gasket for the transmission. But it is t”
from
$15.49
(1)
Transmission Mount: Right, 1 Piece
“This is not an transmission support for a 1990 BMW 525I. The auto and manual trans use two cylinder shaped pieces”
