BMW 525i Engine Parts

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Head sets without head gasket(s)
• Requires purchase of head gasket(s) separately
• Premium quality parts
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Contains all the parts needed to complete the repair unless otherwise noted

The Original Equipment Engine Coolant Temperature Sensor is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Head bolt replacement recommended.
• Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
• When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

The Engine Oil Separator is part of the positive crankcase ventilation (PCV) system. This part is typically located on the valve cover and is designed to trap engine oil vapors in the device and return the vapors back into the engine crankcase. When this part becomes plugged oil vapors will be ingested into the intake air system and cause excessive oil consumption and smoke from the tailpipe.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

• Prevents moisture and debris from entering and contaminating the system
• Direct fit
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Produced by an original equipment supplier

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

• Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
• Durable construction – stringent specifications and careful construction help ensure longevity
• Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• This specific belt is for applications with standard temperature and load requirements with a reinforced round tooth profile for more demanding drives

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:

• Includes all the bolts needed to complete the job.
• Comes with torque specs to make sure each bolt is properly tighten
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Aluminum bolts are torque to yield and must be replaced once they are released.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

The mechanical and automatic Tensioning Pulleys INA, permanently guarantee the constant maintenance of belt tension, doesn’t matter the external conditions and frequent speed changes that happen in daily driving, and assure the proper functioning of Distribution System and Accessories.

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Not impacted by temperature changes and provide robust, long-lasting sensor protection
• Designed digital output for maximum signal to noise ratio
• All parts used in the manufacture process are Delphi validated
• Not impacted by temperature changes and provide robust, long-lasting sensor protection