from

$144.79

Wheel Bearing

from

$279.99

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
The bolt stem has a dacromet coating to meet O.E.M.standards.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

from

$374.99

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
The bolt stem has a dacromet coating to meet O.E.M.standards.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

from

$5.99

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Diamond Striped Kit for Clamp-in REDI-Sensors and many OE vehicles

from

$6.99

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

from

$14.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Complete TPMS valve stem assembly for OE and REDI-Sensor
0.453″ rim hole compatiblity
200 PSI maximum cold inflation pressure

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$1024.99

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.

from

$759.99

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.

from

$601.99

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

EZ-sensor must be programmed to specific M/M/Y vehicle
EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
EZ-sensor can be programmed by most all TPMS programming tools on the Market
Supports 314.9, 315 and 433 MHz sensor applications
Always keep your TPMS scan and programming tool up to date with the latest software
Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
Valve Core Torque = 3.5 in-lbs (0.4 Nm)

from

$53.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

Metal clamp-in stem.
Works with most major TPMS Scan tools
Reduces SKUs
OE Designed and Validated
Advance anodization of valve stems and hex nuts
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$3.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$6.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$154.17

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:

Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
100% tested to the actual OE specifications per part number for fit, form and function
High quality steel and surface finishes
Proper implementation of heat treatment

from

$415.24

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.

Product Features:

OE sensors assure correct ABS functions
Premium seals, both inboard and outboard, protect the bearing
Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
100% tested to the actual OE specifications per part number for fit, form and function
High quality steel and surface finishes
Proper implementation of heat treatment

from

$29.99

Schrader service caps are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
DURABLE: Caps are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$525.99

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$41.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$41.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$59.99

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a tapered seat.

from

$84.99

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a tapered seat.

from

$4.36

Wheel Bearing Circli

BMW 435i Gran Coupe Wheels and Tires

Top BMW 435i Gran Coupe Wheels and Tires Categories

Essential BMW 435i Gran Coupe Wheels and Tires

FAG – Wheel Bearing (Part No.K8000469484FAG)

McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226)

McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226BK)

Dill Air Control – TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (Part No.7020K)

Continental – TPMS Service Kit (Part No.SE54195)

Dill Air Control – TPMS Complete Valve Stem Assembly for OE and REDI-Sensor (Part No.VS-70)

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

McGard – Black Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726BK)

McGard – Chrome Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726)

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)

REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 433 Mhz — 1 Sensor (Part No.SE10008)

Schrader – TPMS Sensor Service Kit (Part No.20018)

Schrader – TPMS Sensor Service Kit (Part No.34000)

SKF – Wheel Bearing (Part No.K8000469484SKF)

SKF – Wheel Hub Assembly (Part No.K7001943783SKF)

Schrader – TPMS Valve Stem Cap, Black, 100 Pack (Part No.20595-100)

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27226)

McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27326)

SKF – Wheel Bearing Circli (Part No.K8027294313SKF)

BMW 435i Gran Coupe Wheels and Tires Categories

Helping You Find the Right Wheels and Tires for Your BMW 435i Gran Coupe

Top Wheels and Tires Brands for Your BMW 435i Gran Coupe

Top-Rated Schrader Wheels and Tires

Leading Schrader Wheels and Tires

FAQs for BMW 435i Gran Coupe Wheels and Tires

What are the most purchased Wheels and Tires for the BMW 435i Gran Coupe?

What are the top-rated BMW 435i Gran Coupe Wheels and Tires?

Find Your BMW 435i Gran Coupe Wheels and Tires by Year

More Popular Parts for All Makes