BMW 428i xDrive Engine Parts

The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.

Product Features:

• Upgraded replacement – this thermostat hose flange repair kit includes a stronger aluminum flange to prevent future leaks
• Convenient kit – comes with flange, O-ring and clamp for complete repair of failed coolant junction
• Application specific – designed to directly fit certain BMW model years
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• STRONG AND DURABLE – Features molded rubber over a rigid carrier for durability, precise alignment and fit
• SUPERIOR SEAL – Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
• EASIER TO INSTALL – One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
• INSTALLATION AID – SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Anchor 9972, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2013-2021
• Weight approx: 2 Lbs
• Hydraulic

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

This turbocharger boost solenoid is designed to match the fit and function of the original solenoid on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this turbocharger boost solenoid is designed to match the fit and function of the original part on specified applications
• Restores functionality – reliable replacement for an original part that has failed due to corrosion, heat or vibration
• Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Not impacted by temperature changes and provide robust, long-lasting sensor protection
• Designed digital output for maximum signal to noise ratio
• All parts used in the manufacture process are Delphi validated
• Not impacted by temperature changes and provide robust, long-lasting sensor protection

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

• Guaranteed fitment
• Direct-fit replacement design instantly restores proper engine oil cooler performance
• OE-style line connections for easy installation
• Manufactured using high-quality materials to withstand intense lubrication system heat and pressure
• Designed and tested for reliability and long life

This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
• Complete assembly – includes replacement pan and drain plugs to match original components
• Durable design – high-strength coating prevents future corrosion
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Rotomaster Remanufactured Turbochargers are built to meet Original Equipment (OE) standards for fit, function, and performance across a wide range of vehicles. Each turbocharger is fully disassembled, meticulously inspected, and thoroughly cleaned to restore like-new performance. It then undergoes Triple Balance Processing, a vital step that ensures precise calibration for smooth, reliable operation, meeting the same rigorous standards as a new turbocharger. This thorough process guarantees consistent power, enhanced fuel efficiency, and long-lasting durability, making Rotomaster reman turbochargers a trusted and reliable choice for vehicle owners. As specialists in turbochargers, Rotomaster brings superior expertise to every unit. Their on-call technical support team is ready to help with installation, troubleshooting, and product selection so you can stay up and running with confidence. Protected by an industry-leading warranty for your peace of mind.

Product Features:

• Full Component Replacement: 100% of rotating, journal, and thrust bearings, as well as seals, are replaced. All mating surfaces and internal passages are renewed.
• Thorough Inspection: Each component is inspected to strict OE-level standards. Guarantees that every turbocharger meets high-quality standards for optimal performance and reliability.
• Built to Fit Right: All wheels, shafts, and bores are accurately measured renewed or replaced. Ensures smooth, reliable operation for maximum efficiency for all environments.
• Built to OE Spec: Each remanufactured turbocharger is built to match original equipment specifications. Provides a precise fit and seamless installation, reducing installation time and effort.
• Installation Ready: Each turbocharger comes complete with a pre-lube syringe to protect internal components during initial start-up, promoting a smoother, safer installation.
• Specialized Cleaning: Fully disassembled and cleaned using advanced equipment and processes. Restores like-new performance and reliability, ensuring consistent operation over time.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Rein SELECT Engine Timing Chain Kits are the most comprehensive engine timing chain kit solutions available. Included are the timing chains, rails, tensioners, seals, gaskets, and all necessary application-specific components and hardware to complete installation. These kits are designed for vehicles that have been meticulously maintained as per manufacturer specifications, have used OE-approved fluids and filters, and with no indication of a noisy timing chain drive. Rein SELECT Engine Timing Chain Kits are ideal for vehicle owners and professional repair technicians who are certain that a preventative refresh of the timing chain drive will be all this engine currently needs. These application-specific kits were designed with the technician and repair in mind.

Product Features:

• All components match OE Fit, Form, and Function.
• Contains all necessary components, hardware, gaskets, and seals to properly maintain the engine timing chain system.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Multi-Ply Reinforced High Temp Silicone
• Allows For Expansion
• Leak-Free Seal

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

• Guaranteed fitment
• Cracked valve covers can create troublesome vacuum leaks and allow leaking oil to damage engine components
• URO Parts’ replacement valve covers are precisely manufactured to OE dimensions for easy installation and maximum protection of valvetrain
• Durable high-quality metal or plastic material is corrosion-resistant and withstands oil vapor and intense engine heat

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles
• Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
• Durable construction – made from quality components to ensure reliable performance and long service life
• Quality assured – backed by a team of product engineers based in the United States

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Rein OE quality valve cover kits are designed and manufactured to be direct replacements for OE units. Kits contain common failure items including breather hoses, oil caps and hardware that need to be changed when the valve cover is replaced. . Rein valve covers have identical dimensions to the genuine parts. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.

Product Features:

• Direct Replacement.
• Kitted with installation components ensuring easy replacement including hardware, oil cap and breather hoses.
• Manufactured from high quality materials to ensure a long service free life.
• Supplied with high quality gasket to prevent leaks.
• Supplied with integrated breather valve.