BMW 428i Fuel and Emissions Systems

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

• Built-in circuit protection to ensure your electronics and computer systems stay unharmed
• High reliability of pressure sensing proved in gasoline and diesel direct injection systems
• Sturdy design, vibration resistant and thermal stability

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:

• CARQUEST MAF use all new high-quality components at the highest quality standards.
• Manufactured with new and advanced technology to perform, fit and function at OE specifications.
• All new product that is tested with OEM equipment to OEM standards
• Outperforms competition when tested in extreme environmental conditions

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This OE quality breather hose is vehicle specific and a direct replacement for the original component. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

• Original Equipment fit, form and function
• Manufactured from premium raw materials
• Premium OE design
• Right fit the first time
• For European vehicles

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

AMBIENT TEMP SENSOR

Fuel Injector Seal

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications

Vapor Canister Gromm

GDI SEAL TOOL KIT

Fuel Pump Control Mo

Hose Clamp

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Air Mass Meter Boot

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Bosch is a leading manufacture for Gasoline Direct Injection application now provides the market with the solution for servicing the Injectors after being removed from the cylinder head. It is are recommended to replace the seals once the injectors are serviced as they are one time use. All Set of seal and kit bags come complete with all the necessary parts for a successful installation.

Product Features:

• OE supplier, provides exact flow and original spray pattern for optimal performance
• Enhances a homogeneous and lean-burn combustion
• Key enabler for engine downsizing, while maintaining desired horsepower
• High-pressure fuel is injected directly into the combustion chamber
• Maintains new-car smoothness and drivability

Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.

Product Features:

• OE-Equivalent Direct fit for easy installation.
• OE connections and fittings.
• Superior turbine pump design that virtually eliminates fuel pulsation.
• Precision, spin-balanced armature to reduce noise and vibration.
• Premium carbon brushes, utilizing advanced materials.
• Noise suppression coil that eliminates radio frequency interference.
• Illustrated step-by-step instructions are included.

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
• Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
• Lower amperage draws less load on vehicle’s electrical system
• Part is validated, tested and matched to the right vehicle application
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Lower failure rates due to its innovative design and durability

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

This is an OE quality fuel cap. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

• Original Equipment fit, form and function
• Manufactured from high quality materials
• Right fit the first time
• O ring is black in color
• For European vehicles

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models