from

$327.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 19 X 8, 37MM Offset, 5 Grooved Spokes, 5 Lug, 120MM Bolt Pattern, Front, All Painted Silver. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle.

Product Features:

19 X 8, 37MM Offset, 5 Grooved Spokes, 5 Lug, 120MM Bolt Pattern, Front, All Painted Silver, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Lug Nuts And Center Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$1.99

Parts Kit For Imports

from

$19.99

Complete Valve Kit for Huf Baolong Electronics (BH Sens) OE and Aftermarket sensors.

Product Features:

OE quality metal valve
Valve, plastic cap, core, grommet, and shear collar hex nut are all included.
Corrosion protection.
Flexible valve angle 0 to 36 degrees.
Flexible Valve Angle 0 To 36 Degrees.

from

$4.99

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

Titan Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$34.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$333.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$579.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$5.99

Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
Each kit includes a fully assembled Schrader rubber valve assembly and mounting screw
Valve cores are designed to OE specifications
Replacement components in Schrader TPMS service kits are sensor specific
OE fit, form, and function
The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

from

$6.99

Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
Replacement components in Schrader TPMS service kits are sensor specific
The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
OE fit, form, and function
Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

from

$14.99

Ball-seat valve stem assembly with internal shear ring.

Product Features:

43mm
Rim Hole Compatibility: 0.453″
200 PSI maximum cold inflation pressure

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$786.99

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.

from

$1061.99

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.

from

$16.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$61.99

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a tapered seat.

from

$387.99

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
The bolt stem has a dacromet coating to meet O.E.M.standards.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

from

$289.99

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
The bolt stem has a dacromet coating to meet O.E.M.standards.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with a tapered seat.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.

from

$13.99

Product Features:

Black
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$13.99

Product Features:

Black
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$49.99

Wheel bearings of the 1st Generation are compact bearing units, manufactured with a defined and preset bearing clearance, for-life lubrication (no maintenance) and sealing. First generation wheel bearings are used on many applications due to their compact and rugged design, featuring lifetime sealing and lubrication. We have developed angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations.

from

$191.99

Product Features:

EASY TO INSTALL – SureSignal technology features magnetic encoders on both sides of the bearing to eliminate installation error
BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$238.99

This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:

Complete repair – this assembly includes the wheel hub and application-specific bearing components
Saves time – eliminates work required to remove individual corroded components
Reliable fit – precision-engineered to match the dimensions of original equipment
Trustworthy quality – engineered and tested in the United States

from

$119.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$25.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

BMW 335is Wheels and Tires

Top BMW 335is Wheels and Tires Categories

Essential BMW 335is Wheels and Tires

KAI – Reconditioned OEM Aluminum Alloy Wheel, 19 X 8, Front, All Painted Silver (Part No.ALYBP087U20)

Xtra Seal – Parts Kit For Imports (Part No.15-20211)

Huf North America – Metal Flexible Angle TPMS Valve – Silver 43 mm (Part No.RDV021)

Autel – Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)

Autel – Adjustable Angle MX-Sensor 1-Sensor (Rubber) (Part No.300020)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Autel – MX-Sensor 1-Sensor: TPMS Sensors With Rubber Valve Stems, Bulk Box (20-Pack) (Part No.300010)

Schrader – TPMS Service Pk 20018 (Schrader Snap-In Valve Assembly) (Part No.20018)

Schrader – TPMS Service Kit 34000 (Schrader Alum Valve Assembly) (Part No.34000)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring (Part No.1096)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

McGard – Chrome Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726)

McGard – Black Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726BK)

Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)

McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)

McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226BK)

McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226)

Huf North America – Aluminum Valve 48mm (Part No.RDV028)

Huf North America – Aluminum Valve 49mm (Part No.RDV030)

Schaeffler – Wheel Bearing (Part No.805560A)

National – Tapered Roller Bearing Cone (Part No.511044)

Dorman – Wheel Hub and Bearing Assembly (Part No.951-259)

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-246646)

National – Multi-Purpose Seal (Part No.229010)

BMW 335is Wheels and Tires Categories

Helping You Find the Right Wheels and Tires for Your BMW 335is

Top Wheels and Tires Brands for Your BMW 335is

Top-Rated Schrader Wheels and Tires

Leading Schrader Wheels and Tires

FAQs for BMW 335is Wheels and Tires

What are the most purchased Wheels and Tires for the BMW 335is?

What are the top-rated BMW 335is Wheels and Tires?

Find Your BMW 335is Wheels and Tires by Year

More Popular Parts for All Makes