BMW 328ic Performance and Racing Products
Top BMW 328ic Performance and Racing Products Categories
We carry over 10 Performance and Racing Products in inventory for the BMW 328ic. If you’re looking for aftermarket Performance and Racing Products for your BMW 328ic, check out all these categories:
Essential BMW 328ic Performance and Racing Products
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-1000)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-20442)
from
$387.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
- Seamless Integration w/Stock Air Inlet
- Washable And Reusable
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 20 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12392)
from
$387.99
This air intake system produces up to +20 hp, 25 lbs. x ft. torque and out-flows the factory intake by 80%. Included in this system is a washable/reusable oiled conical air filter that uses five layers of progressive weave media for maximum air flow. The filter is constructed with 100% polyurethane for a long life and multiple cleaning cycles. This intake system also features a roto-molded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.
Product Features:
See More
Product Features:
- Out Produces Factory Intake By 80%
- Produces An Astonishing 20 HP And 25 ft./lbs. Torque
- Includes A Durable 18 Gauge; Powder coat Heat Shield
- CAD-Designed Roto-Molded Intake Tube
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.57-1002)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)
from
$245.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
Energy Suspension – Sway Bar Bushing Set (Part No.12.5103G)
from
$27.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.12.5104R)
from
$27.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.12.5101R)
from
$27.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.12.5101G)
from
$27.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.12.5104G)
from
$27.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
BMW 328ic Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your BMW 328ic
You love your 328ic. So we’ve made it easier than ever to help you find BMW 328ic Performance and Racing Products in our online catalog. Our inventory holds 10 aftermarket and OEM Performance and Racing Products for your BMW 328ic, ranging from $27.99 to $387.99.
We offer parts from 4 brands trusted to make quality Performance and Racing Products for your BMW 328ic. Before you buy, take some time to read through customer reviews. We currently have 9 reviews of BMW 328ic Performance and Racing Products from previous customers.
Find your 328ic Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 328ic part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your BMW 328ic
Our inventory holds Performance and Racing Products for your BMW 328ic from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Energy Suspension, and Flowmaster Inc., all of which can keep that BMW happy.
We have K&N parts available for your BMW 328ic in categories like Performance Air Intake Kits. Some of the top-rated K&N parts in these categories are:
from
$367.99
(5)
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
from
$367.99
(1)
Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter
Performance Air Intake Kits
FAQs for BMW 328ic Performance and Racing Products
What are the most purchased Performance and Racing Products for the BMW 328ic?
Out of 10 Performance and Racing Products for the BMW 328ic, the most popular in our inventory are:
from
$245.99
This product is not rated
DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound
Performance Exhaust Mufflers
