BMW 328i Engine Parts

New Standard Replacement Undercar Shield, With Aluminum Pin For AWD Sedan Models

Product Features:

• With Aluminum Pin For AWD Sedan Models, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Rein Automotive OE quality oil pan kits are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil pans are designed to tight tolerances to ensure proper sealing. Kits include OE quality gaskets or Ajusil silicone sealant where the OE pans do not use a gasket. Kits include new drain plugs.

Product Features:

• Includes OE quality gaskets or Ajusil silicone sealant.
• Includes new drain plugs.
• Designed to tight tolerances to ensure proper sealing.

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

This replacement VVT oil control valve is a direct replacement for a worn or leaking original equipment valve. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

• Ideal replacement – this VVT oil control valve matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system
• Durable construction – this VVT oil control valve is made of quality materials to ensure reliable performance and a long service life
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Multi-Ply Reinforced High Temp Silicone
• Allows For Expansion
• Leak-Free Seal

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Meets or exceeds OE specifications

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 06-16;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2006-2016
• Weight approx: 2 Lbs
• HYDRAULIC

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

Rein OE quality valve cover kits are designed and manufactured to be direct replacements for OE units. Kits contain common failure items including breather hoses, oil caps and hardware that need to be changed when the valve cover is replaced. . Rein valve covers have identical dimensions to the genuine parts. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.

Product Features:

• Direct Replacement.
• Kitted with installation components ensuring easy replacement including hardware, oil cap and breather hoses.
• Manufactured from high quality materials to ensure a long service free life.
• Supplied with high quality gasket to prevent leaks.
• Supplied with integrated breather valve.
• Kitted with eccentric shaft sensor that should be replaced when the valve cover is changed.

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

This engine variable valve lift eccentric shaft actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine variable valve lift eccentric shaft actuator is made to match the fit and performance of the original actuator on specific vehicle applications
• Restores functionality – built to restore the appearance and function of an actuator that has failed due to damage or fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.