BMW 3.0S Brake Parts

As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:

• Short closing paths
• Low volume uptake
• High efficiency
• Low throttling / after-suction resistance
• Low pressure differential between primary and secondary circuits
• Good bleedability
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Central valve version suitable for ABS
• Compact design – ideal for installation in small spaces
• Reduced weight – by roughly 20% compared to conventional central valve technology
• Fewer components – almost half as many as compared to conventional technologies
• Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
• Low volume uptake – minimized elastic deformations due to smaller seals
• Sealing cups supported in the housing – robustness against soiling and wear; longer life
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)

ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

ATE, a brand of Continental with more than 100 years of experience in brake development, is once again setting the standards in quality, innovation and system expertise. The high-carbon brake discs have a number of positive characteristics – they optimize durability and prevent, for example, brake judder and noise. With extremely low tolerances of max. 30 µm for lateral runout and max. 10 µm for thickness variation, ATE provides ideal aftermarket solutions in its role as a system supplier with OE expertise. The tolerances of the centering bores are also extremely low in order to prevent imbalance and radial runout. This contributes to extending the service life of the wheel suspension and wheel bearings. Depending on the vehicle model, mounting bolts are included with the brake discs at no extra charge. These mounting bolts are used to fix the brake disc to the wheel hub during installation. The bolt symbol on the brake disc label provides a clear indication that mounting bolts are included in the package. The mounting bolts included with ATE brake disc packages are always coated bolts, which reduces their susceptibility to corrosion and increases the longevity of the product. The MetaCote protective coating formulation is cured at approximately 572F. No grease or oil to remove. This helps protect against road salt, brake fluid and other corrosives – sheds water and dirt for clean appearance behind cast spoke wheels. Reduction in overall installation time.

Product Features:

• OE-equivalent and a direct fit replacement.
• Patented RotorLife wear indicator.
• Optimum performance at all temperatures.
• Reduced rotor wear.
• less susceptible to noise and vibration.
• MetaCote protective anti-corrosion coating.

The Elring Distributor O-Ring is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:

• OE engineered brake system technology assures optimum fit and performance
• Advanced friction vehicle specific formulations
• Reduced dusting and extend pad life
• Application matched premium quality friction grade
• Underlayer design helps reduce noise, vibration and harshness
• Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance