BMW 1 Series M Brake Parts

Essential BMW 1 Series M Brake Parts

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3616)

Disc Brake Caliper with Bracket

from

$135.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • Brackets included where required for complete system restoration
  • OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
  • New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • Stainless steel pad abutment hardware included when applicable
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1602)

Brake Pad Wear Sensor

from

$33.49
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.16157)

Disc Brake Caliper Guide Pin Boot Kit

from

$16.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Maintains proper movement for safe, effective stopping performance
  • Prevents noise and premature wear
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Front (Part No.17-918)

Z17 Evolution Ceramic Brake Pads with Hardware - Front

from

$73.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

Carquest Standard – Brake Pads: Ceramic, Reliable and Dependable Stopping – Rear (Part No.NAD919)

Brake Pads: Ceramic, Reliable and Dependable Stopping - Rear

from

$54.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

LuK – Clutch Master Cylinder (Part No.LMC454)

Clutch Master Cylinder

from

$155.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Carquest Wearever – New Brake Master Cylinder: without Reservoir, Exact Fit, 0.875" Bore (Part No.MCA630838)

New Brake Master Cylinder: without Reservoir, Exact Fit, 0.875" Bore

from

$128.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Rein – Brake Vacuum Pump with Gasket (Part No.BVP0067)

Brake Vacuum Pump with Gasket

from

$307.99
Rein OE Manufactured Brake Vacuum Pumps are produced in an OE factory to the specifications of the auto maker’s engineers! These brake vacuum pumps come complete with a mounting gasket or seal, depending on the application. Vacuum pumps are used in vehicles with engines that do not produce sufficient vacuum to provide power to the braking system, EGR valves, intake manifold switches, as well as turbocharger actuators and others. A failed or improperly working brake vacuum pump can lead to a reduction in braking power, a reduction in part and/or full load performance, a triggering of check engine light or limp mode, or engine misfires. All Rein brake vacuum pumps are manufactured by an OE manufacturer and are the exact same units that originally came on the vehicle!

Product Features:
  • Ensures the proper operation of vehicle’s braking as well as all other vacuum dependent systems
  • Engineered and manufactured by an OE manufacturer
  • Plug and play replacement for original vacuum pump
  • Applicable gasket included
See More

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621233)

Brake Hydraulic Hose

from

$24.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621227)

Brake Hydraulic Hose

from

$34.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – Parking Brake Shoes (Part No.S831)

Parking Brake Shoes

from

$49.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-3117)

Vacuum Brake Booster: Without Master Cylinder

from

$156.99
Wearever power brake boosters are built to meet or exceed original equipment (OE) performance standards for fit, form and function. Every brake booster is completely disassembled, cleaned, inspected, and remanufactured with OE-quality components. We also use reverse engineering to gain insight into why the original unit failed, often resulting in an improved product. All Wearever power brake boosters are 100 percent tested to ensure proper fit and function.

Product Features:
  • 100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • New mounting nuts and washers ensure proper, hassle-free installation.
  • All units are 100 percent tested to ensure reliable performance.
  • Guaranteed fit and function.
  • Meets or exceeds O.E. performance.
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.28419A)

Air Charge Temperature Sensor Connector

from

$18.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2298)

Multi-Purpose Wire Connector with Leads

from

$41.99
ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13572)

Disc Brake Hardware Kit

from

$27.49
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13433A)

Disc Brake Hardware Kit

from

$21.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Low-friction PTFE coating to reduce drag
  • Manufactured with quality materials to suppress high stress levels
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15299)

Disc Brake Caliper Repair Kit

from

$4.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14201)

Disc Brake Caliper Guide Pin Kit

from

$13.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Helping You Find the Right Brake Parts for Your BMW 1 Series M

You love your 1 Series M. So we’ve made it easier than ever to help you find BMW 1 Series M Brake Parts in our online catalog. Our inventory holds 35 aftermarket and OEM Brake Parts for your BMW 1 Series M, ranging from $4.99 to $307.99.

We offer parts from 11 brands trusted to make quality Brake Parts for your BMW 1 Series M. Before you buy, take some time to read through customer reviews. We currently have 105 reviews of BMW 1 Series M Brake Parts from previous customers. Some of the top rated parts include Brake Pads: With Hardware, Ceramic, Long Life and Quiet with 3.8 stars and Brake Pads: Ceramic, Reliable and Dependable Stopping – Rear with 4.5 stars.

Find your 1 Series M Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 1 Series M part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your BMW 1 Series M

Our inventory holds Brake Parts for your BMW 1 Series M from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Carquest Professional, and Carquest Premium, all of which can keep that BMW happy.

Top-Rated Carquest Wearever Brake Parts

Leading Carquest Wearever Brake Parts

We carry Carquest Wearever brand parts for your BMW 1 Series M across several catalog categories, including Brake Calipers and Brake Pads and Shoes. Some of our most reviewed Carquest Wearever parts include:
Disc Brake Caliper Guide Pin Kit
from $7.49
(35)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins
Brake Pad Wear Sensor
from $33.49
(13)
Brake Pad Wear Sensor
Brake Wear Sensors
Air Charge Temperature Sensor Connector
from $18.99
(7)
Air Charge Temperature Sensor Connector
ABS Harness Connectors

FAQs for BMW 1 Series M Brake Parts

What are the most purchased Brake Parts for the BMW 1 Series M?

Out of 35 Brake Parts for the BMW 1 Series M, the most popular in our inventory are:
Disc Brake Caliper Guide Pin Boot Kit
from $15.29
(2)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits

What are the top-rated BMW 1 Series M Brake Parts?

Top-rated Brake Parts for your BMW 1 Series M based on customer reviews/ratings are:
Brake Pads: With Hardware, Ceramic, Long Life and Quiet
from $74.99
(6)
Brake Pads: With Hardware, Ceramic, Long Life and Quiet
“Great brake pads, leaves no brake dust and very quiet.”
Brake Pads: Ceramic, Reliable and Dependable Stopping - Rear
from $54.99
(4)
Brake Pads: Ceramic, Reliable and Dependable Stopping – Rear
“Great for the price”