Blue Bird TC1000 Parts

Please Select your Vehicle to See Exact Fit Parts

Blue Bird TC1000 Performance and Racing Products

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$395.99

HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.

Product Features:

HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
287/304 Advertised Duration, 235/249 Duration @ .050″, .510″/.495″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$259.99

HYDRAULIC – Xtreme Energy: Street/strip, 2800+ stall, rough idle. 9.5:1+ compression.

Product Features:

HYDRAULIC – Xtreme Energy: Street/strip, 2800+ stall, rough idle. 9.5:1+ compression.
284/296 Advertised Duration, 240/246 Duration @ .050″, .574″/.578″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$259.99

HYDRAULIC – Xtreme Energy: Good for street machines, slightly rough idle, stock converter will work but best with 1800+ stall.

Product Features:

HYDRAULIC – Xtreme Energy: Good for street machines, slightly rough idle, stock converter will work but best with 1800+ stall.
268/280 Advertised Duration, 224/230 Duration @ .050″, .515″/.520″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$259.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$643.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$342.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.
292/292 Advertised Duration, 244/244 Duration @ .050″, .550″/.550″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$937.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$342.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.
262/270 Advertised Duration, 218/224 Duration @ .050″, .504″/.510″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$390.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$637.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Performance with slight rough idle in 396. Great for heavy towing in 454 c.i.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – High Energy: Performance with slight rough idle in 396. Great for heavy towing in 454 c.i.
268/268 Advertised Duration, 218/218 Duration @ .050″, .485″/.485″ Lift, 110 Lobe Separation

from

$678.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

Blue Bird TC1000 Engine Parts

from

$1270.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1166.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$635.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1166.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$3019.99

Every remanufactured engine is built to OEM or better standards, undergoing rigorous inspection and machining to meet or exceed original factory specifications. The process starts with 100% magnaflux crack detection on cast iron blocks, ensuring no hidden flaws compromise durability. Each block is precisely CNC machined and cylinders are honed to exact OEM cross-hatch patterns for optimal performance. Cylinder heads are resurfaced, inspected, and fitted with new valves, seals, and lifters-either OEM remanufactured or the highest-quality aftermarket options, selected based on which offers superior durability and reliability. Comprehensive pressure and vacuum testing guarantees leak-free operation. Only 100% new pistons, rings, bearings, seals, and critical components-never recycled-are used to deliver like-new performance and long-term dependability. Before shipment, every engine undergoes cold motored Sims testing to verify compression, oil pressure, torque-to-turn, and overall mechanical integrity. The result is a remanufactured engine engineered for maximum durability, reliability, and performance you can trust.

Product Features:

100% Magnaflux Inspection – Detects cracks invisible to the eye for superior reliability.
Cold Motored Sims Testing – Every engine is tested for compression, oil pressure, and proper operation before it ships.
New Pistons, Rings and Bearings – All critical internal components are brand new, never reused.
OEM-Spec CNC Machining – Ensures a perfect fit and factory-quality performance.
DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly.
Product might not be available in all states due to local laws.

from

$259.99

HYDRAULIC – Magnum: Good for daily driven street machine, works with stock converter, likes headers. 396 needs 3.55-3.73 gear and 1800+ stall. Slight rough idle.

Product Features:

HYDRAULIC – Magnum: Good for daily driven street machine, works with stock converter, likes headers. 396 needs 3.55-3.73 gear and 1800+ stall. Slight rough idle.
270/270 Advertised Duration, 224/224 Duration @ .050″, .510″/.510″ Lift, 110 Lobe Separation
Valve spring upgrade required
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$549.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$259.99

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.

Product Features:

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.
262/270 Advertised Duration, 218/224 Duration @ .050″, .504″/.510″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$549.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$350.99

HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:

HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$270.99

These High Energy Die Cast Aluminum Roller Rocker Arms for Chevy V8 396-454 applications are perfect for street and moderate race use. With a 7/16″ stud diameter and 1.7 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy Die Cast Aluminum Roller Rocker Arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added valve lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

Blue Bird TC1000 Belts and Hoses

from

$1.79

The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Meets SAE J20R4, Class D-2 requirements
Features a high strength knitted reinforcement and synthetic EPDM rubber construction
Resistant to standard coolants, ozone and other detrimental environmental elements
PLEASE NOTE: Priced and sold by inch. See store for details.

from

$21.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$72.99

We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications
Replacing the tensioner is recommended (if the vehicle is equipped with one).

from

$88.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides maximum performance at extreme and prolonged operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Troubleshooting designed for the most challenging applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$1.79

Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Meets SAE J20R4, Class D-2 requirements
Features a high strength knitted reinforcement and synthetic EPDM rubber construction
Resistant to standard coolants, ozone and other detrimental environmental elements
Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Priced and sold by inch. See store for details.

from

$69.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications.
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$56.99

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$65.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$112.99

Patented material provides peak performance at prolonged extreme operating temperatures
Construction resistant to cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity, and belt life.
A problem-solving tool designed for the most challenging applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$24.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specifically designed to resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

Looking for the best Blue Bird TC1000 aftermarket replacement parts? Replacing worn and broken parts on your Blue Bird TC1000? Check out our online catalog to find the best selection of aftermarket Blue Bird TC1000 parts as well as real user reviews on Blue Bird TC1000 replacement parts. Make an informed decision about every component you add to your TC1000.

At Advance Auto, we’ve got you covered when it comes to getting your Blue Bird TC1000 in tip top condition. We’ve got over 209 Blue Bird TC1000 parts to choose from in popular categories like Performance and Racing Products, Lighting Products and Interior Products. If you’re looking for the best prices, try searching our Blue Bird TC1000 parts catalog to compare OEM and aftermarket parts for your Blue Bird TC1000.

Whether you need Blue Bird TC1000 body parts, interior components, or custom Blue Bird TC1000 parts you can find them online at Advance Auto. Want to order your Engine Parts online? Or maybe you need your Blue Bird Belts and Hoses same day? No problem, you can pick up TC1000 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Blue Bird TC1000 parts has never been easier.

Advance Auto customers frequently search for the following types of Blue Bird TC1000 auto parts. Check out customer reviews and ratings, and compare prices on the following Blue Bird TC1000 parts:

People also search Advance Auto for these popular years of the Blue Bird TC1000:

Blue Bird TC1000 Parts

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-4003)

Competition Cams – Thumpr 235/249 Hydraulic Flat Cam (Part No.11-601-4)

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam (Part No.11-250-3)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.11-242-3)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam (Part No.11-234-3)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam K-Kit (Part No.K11-246-3)

Competition Cams – Magnum/O-Track 244/244 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-213-3)

Competition Cams – Cam & Lifter Kit, Bbc 295T Big Mutha Thumpr Hyd 1 Kt (Part No.CL11-602-4)

Competition Cams – XE 218/224 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-238-3)

Competition Cams – XE 250/256 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-254-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-205-3)

Competition Cams – Magnum 253/253 Hydraulic Flat Cam K-Kit (Part No.K11-214-4)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K11-202-3)

Competition Cams – XE 230/236 Hydraulic Roller Cam and Lifter Kit (Part No.CL11-432-8)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-202-3)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam and Lifter Kit (Part No.CL11-600-8)

Premium Drive Train – Premium Remanufactured Engine Long Block Assembly (Part No.L42796M6)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.11-207-3)

Competition Cams – Xtreme Energy 248/254 Hydraulic Roller Cam (Part No.11-444-8)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.11-238-3)

Competition Cams – Magnum 244/244 Hydraulic Roller Cam (Part No.11-460-8)

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam (Part No.11-602-4)

Competition Cams – Rocker Arms, Die Cast Alum Big Block Chevy 1.7 1 St (Part No.17021-16)

Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/4 Inch Inner Diameter (sold by inch) (Part No.76225)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 2.25" Diameter (Part No.C70920)

Gates – Micro-V Serpentine Drive Belt (Part No.K080575)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080575HD)

Dayco – Straight Coolant Hose, Standard, I.D. 2" (sold by inch) (Part No.76200)

Gates – Micro-V Serpentine Drive Belt (Part No.K080685)

Dayco – Poly Rib Belt HD Serpentine Belt; 57.5 Long, 8 Rib Count, Heavy Duty (Part No.5080575)

Dayco – Poly Rib Belt HD Serpentine Belt; 68.5 Long, 8 Rib Count, Heavy Duty (Part No.5080685)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080685HD)

Gates – Premium Molded Coolant Hose (Part No.20172)