Bentley Continental Transmission Torque Converters
Your Bentley Continental will be happy to know that the search for the right Transmission Torque Converters you’ve been looking for is over! Advance Auto Parts has 25 different Transmission Torque Converters for your vehicle, ready for shipping or in-store pick up. The best part is, our Bentley Continental Transmission Torque Converters start from as little as $149.99.
When it comes to your Bentley Continental, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Transmission Torque Converters brands so you can shop with complete confidence. We’re sure you will get the right product to keep that Continental running for a long time.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Transmission Torque Converters for your Continental, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 25 Bentley Transmission Torque Converters
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM88H)
from
$203.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM82)
from
$203.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Hays – Converter: Th400 28-3200 Stall (Part No.97-1D28Q)
from
$636.99
Hays Twister 3/4 Race Torque Converters–Good names never go away, and neither should good terms!
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 horsepower.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Race Torque Converter 4L80E 36-4200 Stall (Part No.97-1J36F)
from
$1999.99
Hays Twister Full Race Torque Converters feature a custom designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and are great for power adders such as nitrous, superchargers, and turbos. They are available with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Product Features:
See More
Product Features:
- All Full Race series converters are built, tested, and proven to support up to 1,000 horsepower
- Features a custom anti-balloon plate designed to stop potential torque converter ballooning
- Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all Hays converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- Full Race series torque converters are offered in several different stall speeds for popular automatic transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Race Torque Converter 4L80E 28-3200 Stall (Part No.97-1J28F)
from
$1749.99
Hays Twister Full Race Torque Converters feature a custom designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and are great for power adders such as nitrous, superchargers, and turbos. They are available with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Product Features:
See More
Product Features:
- All Full Race series converters are built, tested, and proven to support up to 1,000 horsepower
- Features a custom anti-balloon plate designed to stop potential torque converter ballooning
- Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all Hays converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- Full Race series torque converters are offered in several different stall speeds for popular automatic transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Race Torque Converter 4L80E 32-3600 Stall (Part No.97-1J32F)
from
$1749.99
Hays Twister Full Race Torque Converters feature a custom designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They are available with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Product Features:
See More
Product Features:
- All Full Race series converters are built, tested, and proven to support up to 1,000 horsepower
- Features a custom anti-balloon plate designed to stop potential torque converter ballooning
- Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all Hays converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- Full Race series torque converters are offered in several different stall speeds for popular automatic transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Race Torque Converter 4L80E 24-2800 Stall (Part No.97-1J24F)
from
$1599.99
Hays Twister Full Race Torque Converters feature a custom designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They are available with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Product Features:
See More
Product Features:
- All Full Race series converters are built, tested, and proven to support up to 1,000 horsepower
- Features a custom anti-balloon plate designed to stop potential torque converter ballooning
- Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all Hays converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- Full Race series torque converters are offered in several different stall speeds for popular automatic transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Race Torque Converter Th400 32-3600 Stall (Part No.97-1D32F)
from
$1177.99
Hays Twister Full Race Torque Converters feature a custom designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They are available with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Product Features:
See More
Product Features:
- All Full Race series converters are built, tested, and proven to support up to 1,000 horsepower
- Features a custom anti-balloon plate designed to stop potential torque converter ballooning
- Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all Hays converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- Full Race series torque converters are offered in several different stall speeds for popular automatic transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Race Torque Converter Th400 24-2800 Stall (Part No.97-1D24F)
from
$921.99
Hays Twister Full Race Torque Converters feature a custom designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They are available with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Product Features:
See More
Product Features:
- All Full Race series converters are built, tested, and proven to support up to 1,000 horsepower
- Features a custom anti-balloon plate designed to stop potential torque converter ballooning
- Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All Hays torque converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all Hays converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- Full Race series torque converters are offered in several different stall speeds for popular automatic transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
B & M – Holeshot 3000 (Part No.20413)
from
$921.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Hays – Converter: 700R4 32-3600 Stall (Part No.97-1E32Q)
from
$870.99
Hays Twister 3/4 Race performance torque converters are a perfect addition to our line of performance flexplates, clutches, and flywheels. Our 3/4 Race series of torque converters are intended for street/strip combinations, with various stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. The Twister 3/4 Race torque converter perfectly describes a converter suited for an application just shy of a Full Race converter.
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Converter: 700/200R4 32-3600 Stall (Part No.97-1F32Q)
from
$870.99
Hays Twister 3/4 Race Torque Converters–Good names never go away, and neither should good terms!
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Converter: 700/200R4 28-3200 Stall (Part No.97-1F28Q)
from
$849.99
Hays Twister 3/4 Race performance torque converters are a perfect addition to our line of performance flexplates, clutches, and flywheels. Our 3/4 Race series of torque converters is intended for street/strip combinations, with various stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. The Twister 3/4 Race torque converter perfectly describes a converter suited for an application just shy of Full Race converter.
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Converter: 700R4 28-3200 Stall (Part No.97-1E28Q)
from
$819.99
Hays Twister 3/4 Race performance torque converters are a perfect addition to our line of performance flexplates, clutches, and flywheels. Our 3/4 Race series of torque converters is intended for street/strip combinations, with various stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. The Twister 3/4 Race torque converter perfectly describes a converter suited for an application just shy of Full Race converter.
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Hays – Converter: 700R4 24-2800 Stall (Part No.97-1E24Q)
from
$799.99
Hays Twister 3/4 Race performance torque converters are a perfect addition to our line of performance flexplates, clutches, and flywheels. Our 3/4 Race series of torque converters is intended for street/strip combinations, with various stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. The Twister 3/4 Race torque converter perfectly describes a converter suited for an application just shy of Full Race converter.
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$767.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter (Part No.20484)
from
$649.99
Torque Converter
B & M – Torque Converter, Nitrous Holeshot 2400 (Part No.20480)
from
$614.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- 2300-2500 RPM
- Small And Big Blocks
- Mild To Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter (Part No.20483)
from
$562.99
Torque Converter
Hays – Converter: Th400 24-2800 Stall (Part No.97-1D24Q)
from
$549.99
Hays Twister 3/4 Race Torque Converters–Good names never go away, and neither should good terms!
Product Features:
See More
Product Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
B & M – Holeshot 2000 (Part No.20416)
from
$409.99
HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
TC Remanufacturing – Torque Converter for Automatic Transmission (Part No.GM88H)
from
$210.99
This remanufactured torque converter is designed to restore smooth engagement, reliable power transfer, and consistent drivability. Built using high-quality internal components and new seals where applicable, each unit is professionally assembled and tested to ensure dependable performance. Designed as a direct-fit replacement, it delivers factory-like operation for everyday driving conditions.
Product Features:
See More
Product Features:
- Remanufactured with O.E.-grade bearings and new seals where applicable.
- Precision-balanced and tested for proper performance.
- Built to meet or exceed original equipment specifications.
TC Remanufacturing – Torque Converter for Automatic Transmission (Part No.GM18A)
from
$179.99
This remanufactured torque converter is designed to restore smooth engagement, reliable power transfer, and consistent drivability. Built using high-quality internal components and new seals where applicable, each unit is professionally assembled and tested to ensure dependable performance. Designed as a direct-fit replacement, it delivers factory-like operation for everyday driving conditions.
Product Features:
See More
Product Features:
- Remanufactured with O.E.-grade bearings and new seals where applicable.
- Precision-balanced and tested for proper performance.
- Built to meet or exceed original equipment specifications.
TC Remanufacturing – Torque Converter for Automatic Transmission (Part No.GM18AL)
from
$179.99
This remanufactured torque converter is designed to restore smooth engagement, reliable power transfer, and consistent drivability. Built using high-quality internal components and new seals where applicable, each unit is professionally assembled and tested to ensure dependable performance. Designed as a direct-fit replacement, it delivers factory-like operation for everyday driving conditions.
Product Features:
See More
Product Features:
- Remanufactured with O.E.-grade bearings and new seals where applicable.
- Precision-balanced and tested for proper performance.
- Built to meet or exceed original equipment specifications.
TC Remanufacturing – Torque Converter for Automatic Transmission (Part No.GM3)
from
$149.99
This remanufactured torque converter is designed to restore smooth engagement, reliable power transfer, and consistent drivability. Built using high-quality internal components and new seals where applicable, each unit is professionally assembled and tested to ensure dependable performance. Designed as a direct-fit replacement, it delivers factory-like operation for everyday driving conditions.
Product Features:
See More
Product Features:
- Remanufactured with O.E.-grade bearings and new seals where applicable.
- Precision-balanced and tested for proper performance.
- Built to meet or exceed original equipment specifications.
FAQs for Bentley Continental Transmission Torque Converters
What are the most popular Transmission Torque Converters for the Bentley Continental?
With 4 brands you can trust, our most popular Transmission Torque Converters for the Bentley Continental are:
from
$203.99
This product is not rated
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
from
$203.99
This product is not rated
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
from
$636.99
This product is not rated
Converter: Th400 28-3200 Stall
Transmission Torque Converters
Find Your Bentley Continental Transmission Torque Converters by Year
People also search Advance Auto for these popular years of Bentley Continental parts:
