Audi TT Engine Timing Parts

Rein Automotive OE quality timing covers are fabricated from premium metal and/or plastic materials and manufactured to be direct-fit replacements. Rein timing covers are designed and manufactured to tight tolerances to ensure proper sealing against engine surfaces.

Product Features:

• Manufactured to strict engineering standards and specifications in materials and tolerances.
• Made with premium materials that is resistant to corrosion to ensure a long service life.
• Includes premium gasket and/or silicone sealant.

On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design’s plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter – small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations.

Product Features:

• Better fix – this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants
• Upgraded materials – the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory’s multi-piece plastic design
• Fully tested – in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
• Ensures performance – engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures

This replacement VVT oil control valve is a direct replacement for a worn or leaking original equipment valve. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

• Ideal replacement – this VVT oil control valve matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system
• Durable construction – this VVT oil control valve is made of quality materials to ensure reliable performance and a long service life
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

• Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
• Durable construction – this part is made from quality materials to ensure a long service life
• Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
• Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

• Direct replacement – this VVT sprocket fits and performs like the original sprocket
• Durable construction – made from durable steel and precision machined for reliable performance
• 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
• Quality assured – vehicle-specific application has been validation tested to ensure quality

This engine timing belt tensioner is designed to match the fit and function of the original tensioner on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine timing belt tensioner is designed to match the fit and function of the original tensioner on specified applications
• Recommended for replacement when a new timing belt and pulleys are installed
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:

• Designed to dampen noise and enhance belt life
• Keeps belt tension at a constant level for better performance
• Meets OE fit, form and function criteria
• Prevents belt flapping

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

• Engineered for both domestic and import vehicle applications with a timing belt
• All components needed for a complete timing belt replacement included in one box
• Includes premium Dayco components and tough, wear-resistant belt

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

• Engineered for both domestic and import vehicle applications with a timing belt
• Includes premium Dayco components and a tough, wear-resistant belt

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

• Engineered for both domestic and import vehicle applications with a timing belt
• Includes premium Dayco components and a tough, wear-resistant belt

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

• Engineered for both domestic and import vehicle applications with a timing belt
• All components needed for a complete timing belt replacement included in one box
• Includes premium Dayco components and tough, wear-resistant belt

ENG TIMING BELT KIT

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• This belt has a round tooth w/ flat tip profile; designed to fit the timing sprockets precisely

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• Teflon coated profile round tooth with flat tip belt designed for specific high performance, high temperature engines

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely