Audi S5 Ignition and Tune-Up Products

Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Trivalent iridescent chromate plating prevents corrosion
• Silicone seals prevent moisture intrusion preventing false codes and sensor failure
• Wiring harnesses utilize high-temperature insulation when applicable
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Delphi knock sensors help maximize engine performance with all fuels
• Delphi knock sensors prevent against engine damage from pre-ignition knocking
• Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
• Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
• Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
• Self-generating piezoelectric design requires no power to the sensor

Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Trivalent iridescent chromate plating prevents corrosion
• Silicone seals prevent moisture intrusion preventing false codes and sensor failure
• Wiring harnesses utilize high-temperature insulation when applicable
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
• Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

Product Features:
• OE design provides an exact fit for your application
• Provides excellent heat resistance as well as maximum protection against spark loss
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the spark plug boot
• Design for direct compatibility

The Champion Iridium Spark Plug is engineered for maximum performance and longevity, making it a premium choice for your vehicle. Featuring a fine-wire iridium center electrode and a V-trimmed platinum ground electrode, this spark plug ensures sharper spark focus and greater ignitability for enhanced engine efficiency. Its Heat-Active alloy design allows the electrodes to quickly reach and maintain optimal operating temperatures, ensuring stable performance under all engine loads. Built with iridium and platinum materials, it offers exceptional durability and extended service life, making it ideal for high-performance applications. The flat seat type and integrated resistor further enhance compatibility and reliability. Choose this performance-grade spark plug to experience smoother starts, improved fuel efficiency, and consistent power delivery.

Product Features:

• Champion Iridium – Maximum Performance. Premium Spark Plug
• Iridium center electrode delivers maximum life
• Fine-wire center electrode and V-trimmed for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Maintains stable operating temperature under all engine loads
• Heat-Active alloy allows electrodes to reach optimal temperature quickly

NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
• PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
• PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
• Engineered for OE Applications: Specifically designed for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
• Stable Idling and Superior Anti-Fouling: These spark plugs provide stable idling and excellent anti-fouling properties, enhancing overall engine performance.
• Improved Fuel Efficiency and Lower Emissions: Engineered to improve fuel efficiency and reduce emissions, contributing to a more eco-friendly driving experience.

The Platinum TT Spark Plug with its advanced twin-tip design ensures faster flame propagation for more complete combustion, enhancing ignition performance and efficiency. Featuring a platinum center electrode, it delivers excellent conductivity and durability, while the titanium-enhanced ground strap ensures superior performance and extended lifespan. The flat seat type provides a secure fit, making it compatible with a variety of vehicles. Designed for reliability and longevity, this spark plug is a dependable choice for maintaining consistent engine performance. Its high-quality materials and innovative design make it a valuable addition to your vehicle’s ignition system.

Product Features:

• Platinum Twin-Tip Design: Features a platinum twin-tip design for enhanced ignition performance and efficiency.
• Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, ensuring superior performance and longevity.
• High-Quality Platinum Center Electrode: The center electrode tip is made from high-quality platinum, providing excellent conductivity and durability.
• Superior Performance and Longevity: Designed to deliver superior performance and extended lifespan, making it a reliable choice for your vehicle’s ignition needs.
• Flat Seat Compatibility: The flat seat type ensures a secure and precise fit, making it suitable for a wide range of vehicle applications.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
• PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
• OE SPECIFIED MULTI-GROUND ELECTRODE: Combines performance of a fine wire spark plug with fouling prevention of a multiple ground electrode plug
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs

Champion Platinum Power spark plugs are engineered for premium performance and durability, making them an excellent choice for maintaining your vehicle’s peak efficiency. Featuring a platinum-tipped center electrode, these spark plugs ensure long-lasting reliability and resist wear, maintaining the proper gap specification throughout their lifespan. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for improved combustion. Constructed with an exclusive Heat-Active alloy, these plugs quickly reach and maintain optimal operating temperatures, ensuring consistent performance under various driving conditions. Designed with a flat seat type and integrated resistor, they deliver smooth operation and compatibility with a wide range of vehicles. Upgrade to Champion Platinum Power spark plugs for a blend of cutting-edge technology and dependable performance.

Product Features:

• Platinum Power- Premium Spark Plug. Powerful Performance.
• Platinum center electrode for long life
• Fine-wire center electrode for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Heat-Active alloy allows electrodes to reach optimal temperature
• Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.

Product Features:

• Meets or exceeds OEM specification
• Ensures reliable voltage for smooth engine performance

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

• First Time Fit
• Built to DENSO Original Equipment Standards

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

• OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
• OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
• EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
• THE NGK DIFFERENCE: Featuring superior materials and design enhancements
• EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
• PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.