Audi S3 Wheels and Tires

Product Features:

• 17 X 7.5, 43mm Offset, 5 Spokes, 5 Lug, 112mm Bolt Pattern, All Painted Bright Silver Metallic, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Lug Nuts And Center Cap Not Included
• Check Out The Large Selection Of Parts Available For Your Vehicle

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:

• Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
• Durable construction – made of quality materials for safe, reliable service
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com.

Product Features:

• EZ-sensor must be programmed to specific M/M/Y vehicle.
• EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
• EZ-sensor can be programmed by most all TPMS programming tools on the Market
• Supports 314.9, 315 and 433 MHz sensor applications
• Always keep your TPMS scan and programming tool up to date with the latest software
• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Aluminum valve can be replaced by Schrader service kit 20049
• Nut Torque = 71 in-lbs
• Valve Core Torque = 3.5 in-lbs

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

• Titan Grey Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

• MX-Sensor Components
• 4 Metal Valves
• 4 Rubber Valves
• Rubber Gasket (2×10 pcs)
• Screw Nut (2×10 pcs)
• Washer (2×10 pcs)
• Metal Valve Cap (2X10 pcs)
• Rubber Valve Cap (2X10 pcs)
• Valve Core (2X10 pcs)

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• The bolt stem has a dacromet coating to meet O.E.M. standards.
• For use with steel or aluminum wheels with a ball-shaped seat.

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
• The bolt stem has a dacromet coating to meet O.E.M. standards.
• For use with steel or aluminum wheels with a ball-shaped seat.

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

• Engineered for OE fit, form and function
• Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
• High-quality steel and surface treatments for proper fit and endurance
• Roll-form bearing design applies exact preload for increased durability (where applicable)
• Bearings and seals are engineered to the requirements of each specific vehicle application
• Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

Product Features:

• Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
• Engineered to overcome problems and deliver smooth, reliable performance.
• MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
• Application specific design

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

• Engineered for OE fit, form and function
• Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
• High-quality steel and surface treatments for proper fit and endurance
• Roll-form bearing design applies exact preload for increased durability (where applicable)
• Bearings and seals are engineered to the requirements of each specific vehicle application
• Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

Product Features:

• Chrome Grey Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor
• Warranty on Material and Workmanship

The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• OE fit, form, and function
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Sensor comes fully assembled and ready to install
• Ready out of the box
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Easy to program and covers the majority of vehicles on the road in North America
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Rubber valve can be replaced with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Engineered and manufactured to OEM design and quality specifcations
• Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Sensor comes fully assembled and ready to program and install
• Easy to program and covers the majority of vehicles on the road in North America

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Maximum Signal Strength, Battery Reliability.
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Meets SAE Standards J1205 and J1206
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• 100% ID clone-able with no relearn required
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:

• Complete repair – this assembly includes the wheel hub and application-specific bearing components
• Saves time – eliminates work required to remove individual corroded components
• Reliable fit – precision-engineered to match the dimensions of original equipment
• Trustworthy quality – engineered and tested in the United States