Audi S3 Steering and Chassis Parts
Top Audi S3 Steering and Chassis Parts Categories
We carry over 41 Steering and Chassis Parts in inventory for the Audi S3. If you’re looking for aftermarket Steering and Chassis Parts for your Audi S3, check out all these categories:
Essential Audi S3 Steering and Chassis Parts
Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA472)
from
$249.99
A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tunning of camber settings with up to a degree of negative camber gain, perfect for track days and spirited driving! Raising the front roll-centre (along with negative camber) results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it’s potential.
Product Features:
See More
Product Features:
- Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
- Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
MOOG – Control Arm and Ball Joint Assembly (Part No.RK622883)
from
$127.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Febi – Steering Rack Boot C (Part No.M1011452369FEB)
from
$3.60
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Lemfoerder – OE Replacement Ball Joint (Part No.L2020444925LEM)
from
$78.09
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
MOOG – Ball Joint (Part No.K500016)
from
$104.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Restores like-new steering and handling
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Carquest Premium – Tie Rod End (Part No.310-234679)
from
$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – OE matched design for Form, Fit, and Function (Part No.700-234677)
from
$47.99
Advanced corrosion-resistant electro-coating to reduce rust
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Thread locking compound included.
Whiteline – Sway Bar Link (Part No.KLC167A)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
MOOG – Stabilizer Bar Link (Part No.K750809)
from
$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Dorman – SUBFRAME BUSHING (Part No.537-962)
from
$76.99
SUBFRAME BUSHING
Beck/Arnley – Steering Rack Boot Kit (Part No.103-2912)
from
$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Dorman – Alignment Camber / Toe Lateral Link (Part No.528-316)
from
$171.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Whiteline – Sway Bar 22Mm Heavy Duty Blade Adjustable (Part No.BWR25Z)
from
$231.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Whiteline – Adjustable Sway Bar Kit for Enhanced Handling and Grip (Part No.BWK019)
from
$887.99
Engineered to ‘Activate More Grip’, BWK019 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 26mm 2 point adjustable front sway bar and 24mm 2 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Vaico – Sway Bar Link Bolt (Part No.L1036567755VCO)
from
$2.77
Sway Bar Link Bolt
MOOG – Ball Joint (Part No.K500030)
from
$104.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Febi – Driveshaft Flex Join (Part No.K10222213706FEB)
from
$207.39
Driveshaft Flex Join
Audi S3 Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Audi S3
You love your S3. So we’ve made it easier than ever to help you find Audi S3 Steering and Chassis Parts in our online catalog. Our inventory holds 41 aftermarket and OEM Steering and Chassis Parts for your Audi S3, ranging from $1.83 to $887.99.
We offer parts from 13 brands trusted to make quality Steering and Chassis Parts for your Audi S3. Before you buy, take some time to read through customer reviews. We currently have 66 reviews of Audi S3 Steering and Chassis Parts from previous customers. Some of the top rated parts include OE matched design for Form, Fit, and Function with 1.0 stars.
Find your S3 Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Audi S3 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Audi S3
Our inventory holds Steering and Chassis Parts for your Audi S3 from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Moog, and Beck/Arnley, all of which can keep that Audi happy.
We have Delphi parts available for your Audi S3 in categories like Tie Rods. Some of the top-rated Delphi parts in these categories are:
Top-Rated MOOG Steering and Chassis Parts
Leading MOOG Steering and Chassis Parts
We carry MOOG brand parts for your Audi S3 across several catalog categories, including Tie Rods. Some of our most reviewed MOOG parts include:
FAQs for Audi S3 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Audi S3?
Out of 41 Steering and Chassis Parts for the Audi S3, the most popular in our inventory are:
What are the top-rated Audi S3 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Audi S3 based on customer reviews/ratings are:
from
$47.99
(1)
OE matched design for Form, Fit, and Function
“Bought this because the site/item listed as including the dust boot….it does NOT. Makes you wonder what other information is bad. I found out this a”
