Audi RS7 Ignition and Tune-Up Products

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best.

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
• Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
• We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
• Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Delphi knock sensors help maximize engine performance with all fuels
• Delphi knock sensors prevent against engine damage from pre ignition knocking
• Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
• Delphi knock sensors are sealed to withstand humidity, salt spray, and automotive fluids
• Ground isolated design with 2 wire shielded harness helps protect the sensor signal from electro magnetic interference (EMI)
• Self generating piezoelectric design requires no power to the sensor

Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%

Product Features:

• Bosch OE quality knock sensors for optimum engine protection
• Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
• Bosch OE quality knock sensors increase torque up to 5%
• Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties

BOSCH EVO spark plugs are engineered to ensure reliable ignition throughout its long service life even under extreme conditions in modern engines. Thanks to its improved insulator design and high dielectric strength (greater than 45 kV), the new EVO spark plugs can withstand irregular combustion – known as mega knocking – that can occur in modern, technologically advanced engines. BOSCH EVO spark plugs are developed and produced with the same high quality as original equipment spark plugs. Today’s turbocharged gasoline direct injection engines place high demands on spark plugs – the new BOSCH EVO meets these needs.

Product Features:

• Thermomechanical strength: Improved insulator design features provide greater resistance to irregular burns and mega-knocking.
• Mechanical strength: Improved design features on the insulator and housing increase the head bending strength, reducing risk of damage during installation and optimizing gas seal tightness in the cylinder head
• Electrical strength: Improved design features on the insulator increase the dielectric strength (45kV)
• Long service life: The iridium alloy in the firing pin of the center electrode and platinum-iridium alloy on the ground electrode reduces the wear on the electrodes and increases the service life of the spark plug
• Corrosion defense: Improved corrosion protection through the use of a process developed by Bosch for nickel coating of the spark plug housing
• Important: Always torque to the proper specification using a torque wrench

Champion Double Platinum Power spark plugs are engineered for exceptional performance and durability, making them a premium choice for reliable ignition. Featuring a platinum fine-wire center electrode and a platinum pad ground electrode, these spark plugs ensure greater wear resistance and sharper spark focus for optimal ignitability. The innovative Heat-Active alloy allows the electrodes to reach and maintain stable operating temperatures under all engine loads, enhancing efficiency and longevity. With a V-trimmed ground electrode design, these spark plugs deliver a more precise spark, improving combustion and overall engine performance. Designed as a standard replacement, they are equipped with a resistor and a flat seat type for seamless compatibility with a wide range of vehicles. Whether you’re seeking improved power or extended service life, these spark plugs provide unbeatable value and reliability.

Product Features:

• Double Platinum Power – Premium Spark Plug. More Powerful Performance.
• Platinum center and ground electrode for greater wear resistance
• Maintains stable operating temperature under all engine loads
• Fine-wire center electrode for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Heat-Active alloy allows electrodes to reach optimal temperature

Champion Iridium spark plug is engineered for maximum performance and durability, making it an ideal choice for drivers seeking reliability and efficiency. Featuring a fine-wire iridium center electrode and a platinum ground electrode, it delivers exceptional ignitability and ensures a sharper, more focused spark for optimal engine performance. The V-trimmed ground electrode enhances spark precision, while the Heat-Active alloy allows the electrodes to quickly reach and maintain stable operating temperatures under all engine loads. Designed as an OE replacement, this spark plug guarantees compatibility and seamless integration with your engine. Its resistor type construction minimizes electromagnetic interference, promoting smooth and reliable operation. Built with premium materials, including an iridium center and platinum ground, this spark plug offers extended service life and consistent performance, making it a top-tier choice for performance-grade applications. Whether you’re upgrading or maintaining your vehicle, this spark plug ensures efficiency, longevity, and peak engine performance.

Product Features:

• Champion Iridium – Maximum Performance. Premium Spark Plug
• Iridium center electrode delivers maximum life
• Fine-wire center electrode and V-trimmed for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Maintains stable operating temperature under all engine loads
• Heat-Active alloy allows electrodes to reach optimal temperature quickly
• Platinum Ground Electrode: Equipped with a platinum ground electrode, this spark plug promotes greater ignitability and enhances overall engine efficiency.
• OE Replacement: Designed as an original equipment replacement, the Champion Iridium Spark Plug ensures compatibility and superior performance for any engine.
• Resistor Type: This spark plug includes a resistor type, which helps in reducing electromagnetic interference, ensuring smooth and reliable engine operation.

NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.

Product Features:

• ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs
• Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance and reliability.
• Enhanced Spark Performance: Features a raised platinum pad or platinum fine wire tip on the ground electrode for even wear and improved spark performance in distributorless ignition systems.
• Quality Assurance: Tested to the highest standards to ensure quality and durability, providing peace of mind for vehicle owners.