Audi Exhaust System Kits

When an EGT sensor bung rusts, the typical solution has been to replace the entire exhaust pipe. This Dorman OE FIX kit allows direct replacement of only the failed bung, with a weld-on plate if necessary for pipe repair.

Product Features:

• Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
• Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
• Application specific – designed for a wide range of vehicle years, makes and models
• This part has undergone vehicle try-on testing for conformance to product standards and quality

The MagnaFlow 2009-2016 Audi A4 Quattro Sport Series Cat-Back Performance Exhaust System enhances your 2.0L 2009-2016 Audi A4 Quattro with an aggressive character that is sure to help you stand out from the other Audi A4 Quattro you encounter on the street. With its 3in. diameter fast-flowing mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a Dual Straight Driver Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this dyno-proven Audi A4 Quattro exhaust system refuses to be ignored. As such, 15519 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system’s cat-back design replaces all your import’s stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 15519 is backed by MagnaFlow’s limited warranty.

Product Features:

• High-performance lightweight design
• Dyno-proven performance
• Racing inspired sound

The MagnaFlow Touring Series Cat-Back Performance Exhaust System 19159 is the perfect partner for your 3.0L 2012-2015 Audi to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through muffler that terminate in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 19159 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi exhaust system is compatible with 2012-2015 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi like a glove. 19159 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

The MagnaFlow 2010-2016 Audi S4 Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 3.0L 2010-2016 Audi S4 to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through muffler that terminate in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 15599 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi S4 exhaust system is compatible with 2010-2016 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi S4 like a glove. 15599 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

MACH Force-Xp 3" to 2-1/2" Stainless Steel Cat-Back Exhaust System, Black

MACH Force-Xp 3" to 2-1/2" Stainless Steel Cat-Back Exhaust System, Polished

MACH Force-Xp 3" to 2-1/2" Stainless Steel Cat-Back Exhaust System, Polished

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 2.5/2.25 in. Mandrel Bent 409 Stainless Steel
• 100% Hand MIG Welded
• 2.75 in. Inlet Tube
• 304 Stainless Steel Double Wall Angle Cut Tips

The MagnaFlow 2007-2015 Audi Q7 Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 3.0L, 4.2L 2007-2015 Audi Q7 to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler that terminate in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 15085 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi Q7 exhaust system is compatible with 2007-2015 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi Q7 like a glove. 15085 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

The MagnaFlow 2015-2020 Audi A3 Quattro Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 2.0L 2015-2020 Audi A3 Quattro to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through muffler that terminate in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 15352 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi A3 Quattro exhaust system is compatible with 2015-2020 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi A3 Quattro like a glove. 15352 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

The MagnaFlow 2008-2009 Audi TT Quattro Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 3.2L 2008-2009 Audi TT Quattro to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler that terminate in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips. 16719 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi TT Quattro exhaust system is compatible with 2008-2009 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi TT Quattro like a glove. 16719 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

The MagnaFlow 2013-2016 Audi allroad Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 2.0L 2013-2016 Audi allroad to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler that terminate in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 15369 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi allroad exhaust system is compatible with 2013-2016 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi allroad like a glove. 15369 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

The MagnaFlow 2006-2009 Audi A3 Quattro Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 3.2L 2006-2009 Audi A3 Quattro to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 16717 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi A3 Quattro exhaust system is compatible with 2006-2009 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi A3 Quattro like a glove. 16717 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

MACH Force-Xp 3" to 2-1/2" Stainless Steel Cat-Back Exhaust System

MACH Force-Xp 3" to 2-1/2" Stainless Steel Axle-Back Exhaust System, Polished

The MagnaFlow 2014-2017 Audi Q5 Touring Series Cat-Back Performance Exhaust System is the perfect partner for your 3.0L 2014-2017 Audi Q5 to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through muffler that terminate in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 15378 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Audi Q5 exhaust system is compatible with 2014-2017 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi Q5 like a glove. 15378 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Mandrel bent tubing

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a mild sound. This system produces a mild sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

Product Features:

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This axle-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a mild sound. The muffler has a polished finish for ultimate corrosion resistance. Finishing off this exhaust system are dual 4 IN diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

Product Features:

• Constructed from 3 IN to 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing.
• Dual 4 IN Diameter Carbon Fiber 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• All Hardware Included

Product Features:

• Dual 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• All Hardware Included

When an EGT sensor bung rusts, the typical solution has been to replace the entire exhaust pipe. This Dorman OE FIX kit allows direct replacement of only the failed bung, with a weld-on plate if necessary for pipe repair.

Product Features:

• Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
• Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
• Application specific – designed for certain Audi and Volkswagen model years
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience