Audi Air Suspension and Kits

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

These new genuine OE air compressors from WABCO were purchased as an overstock item and Arnott is passing the savings on to you. This WABCO compressor features powder-coated mounting brackets and comes completely assembled and ready to bolt in. This complete unit will cost you a small fortune at your local Audi dealership!

Product Features:

• Exclusively for the 01-05 Audi allroad quattro (C5)
• New Power Harnesses & Airline Fittings
• Includes Dryer & Compressor Relay
• Pre-assembled with Powder Coated Brackets
• Detailed Installation Manual & Video Available

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Quick Strut Kit

Quick Strut Kit

Discover the difference Coil-Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil-Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RV and SUV. The adjustable Coil-Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil-Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil-Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

• Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
• Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
• Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
• No Drill Installation
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Air Strut Kit

These new genuine OES air compressors made by WABCO come completely assembled and ready to bolt in. This new unit comes complete with new air fittings, a thermal sensor, and the intake hose assembly. These compressors commonly burn out, leaving your air suspension on the ground. This compressor is NOT for diesel models.

Product Features:

• Exclusively for 04-10 Audi A8 Quattro (D3)/07-10 S8 (D3) w/V8 Gas Engine only
• Fully Assembled

This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
• Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

Suspension Compresso

This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
• Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

Air Strut Kit

Elec. Air Strut

Elec. Air Strut

Arnott has teamed up directly with WABCO to supply you with the same OE part at a fraction of the dealer cost. These compressors are made by the same supplier used by the OE. Arnott now has the one-stop solution for those who prefer the original equipment. This same compressor assembly will cost you a small fortune at your local dealership! This is just the compressor and dryer assembly. You may have to reuse some of your OEM hardware during the installation. Comes with detailed instructions to walk you through the installation step-by-step.

Product Features:

• Exclusively for 04-10 VW (7L), 07-15 Audi Q7 (4L), 03-10 Porsche (9PA) – SUVs
• Includes Installation Guide

Arnott’s new replacement air compressor P-2984 is from WABCO – the original equipment supplier to Audi. Unlike compressors that are simply modified to fit the vehicle, this compressor was designed by WABCO specifically for the 2006-2011 Audi C6 chassis (Type 4f) A6 Avant, Allroad Quattro and S6 incorporating a high level integration mechatronics. This high-performance, yet quiet, WABCO compressor includes a maintenance-free integrated air dryer and comes completely assembled from the WABCO factory in Germany with an application specific air line, wiring harness and brackets. This direct replacement compressor comes in a WABCO box and is ready to install with included application-specific mounting hardware and a relay.

Product Features:

• Exclusively for 06-11 Audi A6/05-11 A6 Quattro/ 07-11 Audi S6 (C6)
• Includes New Relay & Air Hose
• Pre-Assembled For Easy Installation
• Installation Manual Available

Air Strut Kit

AS-2777 is a new, Arnott-engineered aftermarket air suspension strut for the front right of the 2002-2009 Audi A8 (D3 Chassis). These new assemblies replace the OE strut and feature a custom-tuned shock absorber calibrated to restore the vehicle’s ride and performance. Each Arnott strut includes a new air bladder from Continental ContiTech protected by an aluminum can along with a CNC-machined top mount made from aircraft-quality aluminum. These new air struts are assembled in the USA with Arnott’s long-lasting seals, new O-rings, new bump stop, new heavy-duty crimping rings, new air fitting and connector valve along with a dust boot to protect the strut. This Strut is designed for vehicles with Sport Suspension.

Product Features:

• 2-Ply ContiTech Air Spring Bladder
• Pre-Assembled for Easy Installation
• Detailed Installation Manual Available
• Designed & Assembled in the USA
• Replace in Pairs

AS-2778 is a new, Arnott-engineered aftermarket air suspension strut for the front left of the 2002-2009 Audi A8 (D3 Chassis). These new assemblies replace the OE strut and feature a custom-tuned shock absorber calibrated to restore the vehicle’s ride and performance. Each Arnott strut includes a new air bladder from Continental ContiTech protected by an aluminum can along with a CNC-machined top mount made from aircraft-quality aluminum. These new air struts are assembled in the USA with Arnott’s long-lasting seals, new O-rings, new bump stop, new heavy-duty crimping rings, new air fitting and connector valve along with a dust boot to protect the strut. This Strut is designed for vehicles with Sport Suspension.

Product Features:

• Multi-Ply ContiTech Air Spring Bladder
• Pre-Assembled for Easy Installation
• Detailed Installation Manual Available
• Designed & Assembled in the USA
• Replace in Pairs

Arnott’s completely rebuilt OE front air struts for Audi A8 sedans feature a new rubber air spring bladder manufactured by Continental ContiTech along with a new CNC-machined aluminum upper housing. The price per strut at your local dealership is a small fortune! Once again, Arnott’s design is not only more efficient, it’s also much more affordable! This strut is only for vehicles with Sport Suspension.

Product Features:

• Remanufactured and Tested in the USA
• Anodized Aluminum Finish
• Pre-Assembled For Easy Installation
• Replace in Pairs