from

$419.99

SuspAirBag/Bellows

from

$289.99

This exclusive Arnott-designed rear shock SK-2805 for the Audi all road and A6 (C5 Chassis) delivers excellent control, stability, performance and comfort. This twin-tube shock fits both the left and right sides and includes an actuator and three Voss Air Line Fittings for connecting to the air spring. Arnott’s exclusive design adapts the shock to the original OEM Audi air spring and Arnott’s aftermarket air springs. Arnott recommends replacing these shocks in pairs.

Product Features:

Converts active to passive
Works with OEM or Arnott Air Springs
Detailed Installation Manual Available
Replace in Pairs

from

$134.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$114.99

Quick Strut

from

$369.99

Air Spring Kit

from

$16.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$809.99

SuspAirBag/Bellows

from

$9.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

from

$269.99

Quick Strut Kit

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$455.99

Arnott’s air suspension solenoid valve block is a direct replacement for the vehicle’s failing valve block. The Arnott solenoid valve block is made from the highest quality materials including O-rings and electrical components and is designed to meet or exceed the original equipment. An air suspension solenoid valve block is responsible for distributing air from the compressor to your air struts or air springs. Over time valve block O-rings can dry rot and leak air causing your compressor to overwork or allow moisture to degrade the electrical solenoid components causing additional problems.

Product Features:

Fits 2001-2011 Audi A6/S6/Allroad (C5/C6), 2004-2010 Audi A8/S8 (D3), 2003-2019 Bentley Continental/Flying Spur and 2004-2006 Volkswagen Phaeton
Direct OE replacement
Solenoid valve block efficiently distributes pressurized air
Lab-tested electrically and pneumatically
Color coded for fast installation
Made of high strength, fatigue resistance plastic for dimensional stability and less pressure escape

from

$195.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$95.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$965.99

These new genuine OE air compressors from WABCO were purchased as an overstock item and Arnott is passing the savings on to you. This WABCO compressor features powder-coated mounting brackets and comes completely assembled and ready to bolt in. This complete unit will cost you a small fortune at your local Audi dealership!

Product Features:

Exclusively for the 01-05 Audi allroad quattro (C5)
New Power Harnesses & Airline Fittings
Includes Dryer & Compressor Relay
Pre-assembled with Powder Coated Brackets
Detailed Installation Manual & Video Available

from

$35.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$28.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to the rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Manufactured to strict engineering standards/specifications in materials and tolerances.
High corrosion resistance.
Matches original equipment design specifications.

from

$89.99

Shock Kit

from

$119.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Prevents tire noise and vibration

from

$1364.99

Elec. Air Strut

from

$34.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$684.99

Elec. Air Strut

from

$483.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$114.99

Quick Strut

from

$336.99

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features: