Audi A4 Quattro Steering and Chassis Parts

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

Delphi ball joints adhere to global OE technical requirements and undergo testing focused on strength and durability performance, safety critical tests for a safer driving experience. The ball joint push out test measures the force required to push out / remove the ball-pin from the housing. It is an important safety check to help ensure the part can withstand forces applied to the vehicle suspension system in real road conditions. The ball joint pull out test measures the force required to pull the ball-pin out from the housing. If the force required to remove the ball-pin is below the OE spec, there is a risk the joint could fail during normal driving conditions causing the vehicle to lose directional control. Additionally, Delphi’s new dust cover design features an improved Chloroprene Rubber (CR) formula that helps maintain its durability even in extreme temperatures, helping to protect the internal components and support the continued free movement of the ball joint.

Product Features:

• One of the industry leading ranges with global application coverage.
• Designed, engineered and manufactured to OE quality standards based on more than 100 years of experience in the design and manufacture of OE steering systems.
• First To Market parts (for vehicles still covered by manufacturers warranty)

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

• Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
• Designed as direct-fit replacements to ensure trouble-free proper installation.
• Complete with hardware and seals when necessary for installation to save installation time and additional costs.
• Restores your vehicle to safe and optimal performance levels.
• Replacing both pressure and return hoses together ensures optimal performance and safety levels.

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.

Power Steering Pump Pulley

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit..

Product Features:

• Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
• Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
• Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
• Corrosion resistant – salt spray testing and premium coating help ensure future longevity

The Febi control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

• OE-Equivalent and Direct fit for easy Installation.
• Manufactured using high quality OE materials.
• Includes factory specified hardware.

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

• 100% replacement of rubber sealing components.
• Application of specialized lubricant(s) for extended life.
• Finished in protective coating to prevent corrosion and rust.
• Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Manufactured to meet or exceed OE specifications

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:

• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

The GKN Drivetech Driveshaft CV Joint is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• OEM Quality and a Direct fit Replacement
• Provides exceptional reliability
• Lighter weight provides improved fuel efficiency
• Better driving characteristics and comfort
• Optimum power delivery for peak vehicles

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Loose or worn chassis parts can lead to premature tire wear
• Assembly includes inner and outer tie rods for quick and complete repair
• Incorporates proven design and engineering features
• Easy access wrench flat allows for use of a socket for easy installation and removal

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Manufactured to meet or exceed OE specifications

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:

• Switch sockets allow re-installation of OE pressure sensors
• Zinc coated tubes protect against rust and corrosion
• Banjo end lock tabs prevent hose end from loosening
• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Heat/abrasion tubing protects vital areas
• Restrictor helps absorb vibration and reduce noise
• Movable mount bracket for easy, secure installation
• Silver heat guard protects hose in high heat areas
• Original style fittings, no adapters required

This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.

Product Features:

• Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
• Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
• Durable construction – this part is made from quality materials for reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

P/S Reservoir Line H

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

• Meets or exceeds OE performance specifications
• Performance tested to ensure durability
• Forged micro-alloy steel construction for strength and durability
• A slotted nut and cotter pin for a more secure installation

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

• 100% testing ensures leak-free performance
• Designed to match O.E. fit, function and performance
• Manufactured from O.E. grade material for strength and durability
• Resistant to cracking caused by the high temperatures in the engine compartment
• Reservoirs with integrated filter have the same filtration efficiency as O.E.

Power Steering Reservoir