Audi A4 Brake Parts

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
• Rotors are zinc plated for maximum protection against rust.
• Integral sensor wire in Front pads
• Buy with confidence from the originator & industry leader of brake kits

Brake Hose Lock Clip

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
• Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
• Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
• High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
• Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

The Bosch ABS Control Unit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

ABS Ring

ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:

• Reduced cost
• OE Quality
• Complete Kit

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

ZF TRW Brake Caliper Pin Kit featuring quality and performance. As the world leader in foundation brake systems and a pioneer in electronic braking, ZF TRW continues to develop innovative systems that deliver advanced functionality and performance excellence, to meet and exceed fuel economy standards globally while helping to stop vehicles more efficiently.

Product Features:

• Reduced cost
• OE Quality
• Complete Kit

Exhaust Nut

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

100% New Friction Ready Caliper – Manufacturer recommends replacing calipers in pairs. TRW Aftermarket Brake Calipers are born of market leading design and manufacture, all backed by more than 100 years of TRW experience as a premium quality automotive parts manufacturer. All TRW Aftermarket Brake Calipers are made to original equipment quality so you can fit great parts fast, with no comebacks. In fact, we’re so confident of the quality of our new and remanufactured Brake Calipers that the guarantee has been increased to three years, or a maximum of 60,000 miles (100,000 km.) TRW is a premium quality parts manufacturer, designing and building so much of the original equipment that vehicles are fitted with when they roll out of the factory, and you’ll get that same quality when you buy from TRW Aftermarket. For new replacement Brake Calipers, our aftermarket customers get the same OE/OES part quality, delivered from one of our five original equipment factories in Europe.

Product Features:

• All products are 100% end of line tested during production
• Every Brake Caliper is guaranteed for 60,000 miles (100,000km)

Rein OE Manufactured Brake Vacuum Pumps are produced in an OE factory to the specifications of the auto maker’s engineers! These brake vacuum pumps come complete with a mounting gasket or seal, depending on the application. Vacuum pumps are used in vehicles with engines that do not produce sufficient vacuum to provide power to the braking system, EGR valves, intake manifold switches, as well as turbocharger actuators and others. A failed or improperly working brake vacuum pump can lead to a reduction in braking power, a reduction in part and/or full load performance, a triggering of check engine light or limp mode, or engine misfires. All Rein brake vacuum pumps are manufactured by an OE manufacturer and are the exact same units that originally came on the vehicle!

Product Features:

• Ensures the proper operation of vehicle’s braking as well as all other vacuum dependent systems
• Engineered and manufactured by an OE manufacturer
• Plug and play replacement for original vacuum pump
• Applicable seal included

TRW Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

• Guaranteed factory fit to original equipment specifications
• Meets or exceeds original equipment factory safety standards

Dorman’s Brake Master Cylinder Caps are engineered for affordability and convenience. Save time, money and labor by replacing only the Cap, instead of the entire Brake Master Cylinder.

Product Features:

• Constructed of high-quality plastic for lasting durability
• Available in diverse styles, including threaded and locking
• Protects braking system by providing a tight seal against the elements
• A necessary safety item – prevents brake fluid from splashing and/or leaking

Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.

Brake Pad Sensor

The Vemo Brake Pressure Warning Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

This power brake booster check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this power brake booster check valve is designed to match the fit and function of the original valve on specified vehicles
• Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications, provides better value and
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. Our manual parking brake calipers are provided as a complete assembly to include all adjusting hardware, actuating levers, return springs, clips and bolts. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:

• All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
• New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
• High temperature EPDM rubber for extended life.
• Premium silicone lubrication provides smoother operation.
• The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
• Our manual parking brake calipers are provided as a complete assembly to include all adjusting hardware, actuating levers, return springs, clips and bolts

Brake Vacuum Pump Ga

Product Features:

• EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
• Rotors coated for optimum anti-corrosion protection
• High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
• Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Pads manufactured in Europe for European applications
• ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits