Audi A3 Steering and Chassis Parts
Top Audi A3 Steering and Chassis Parts Categories
We carry over 71 Steering and Chassis Parts in inventory for the Audi A3. If you’re looking for aftermarket Steering and Chassis Parts for your Audi A3, check out all these categories:
Essential Audi A3 Steering and Chassis Parts
MOOG – Steering Tie Rod End (Part No.EV80665)
from
$58.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL – Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- Assembled in the USA
- TIME SAVINGS – Pre-applied thread locking compound makes installation easier and prevents self-loosening
Carquest Premium – Remanufactured Power Steering Rack & Pinion – Electric (Part No.212-0112ECQ)
from
$1036.99
Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
- Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
- Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
- All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
- All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE
Dorman – Alignment Camber / Toe Lateral Link (Part No.528-316)
from
$171.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
National – Bearing Race (Part No.LM29710)
from
$16.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Whiteline – Steering Rack and Pinion Mount Bushing (Part No.W13204)
from
$28.99
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tires have all put radically increased loadings on the steering systems of modern cars. Add to that engine bat contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
MOOG – Ball Joint (Part No.K500390)
from
$66.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Easy to install.
- Construction and design validated by MOOG engineers
- Restores like-new steering and handling
- Designed to meet or exceed original equipment performance
- Broad coverage for foreign and domestic applications
- Engineered to provide long life and dependability
Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80478)
from
$19.99
SWAY BAR LINK KIT 1 EA DRIVE
MOOG – Suspension Ball Joint (Part No.K500016)
from
$105.99
Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Restores like-new steering and handling
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Rein – Sway Bar Bushing (Part No.AVB0617)
from
$28.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Recommend to replace bushings in pairs to ensure best performance. note: sway bar bushing kits contain the needed pair
- Matches original equipment design specifications
Dorman – Suspension Control Arm (Part No.526-947)
from
$185.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.526-949)
from
$185.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Whiteline – Sway Bar Kit – Front 24mm & Rear 24mm (Part No.BWK002)
from
$577.99
Engineered to ‘Activate More Grip’, BWK002 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm 3 point adjustable front sway bar and 24mm 3 point adjustable rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
Whiteline – Sway Bar Kit – Front 24mm & Rear 24mm (Part No.BWK004)
from
$625.99
Engineered to ‘Activate More Grip’, BWK004 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm 3 point adjustable front sway bar and 24mm 2 point adjustable rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Rein – Subframe Mount (Part No.AVM0516)
from
$15.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Matches Original Equipment design specifications
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
Rein – Subframe Mount (Part No.AVM0515)
from
$22.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Matches Original Equipment design specifications
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
MOOG – Alignment Camber / Toe Kit (Part No.K100407)
from
$35.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Provides adjustment for camber and caster changes
- Greaseable design
- Easy to install
- Construction and design validated by MOOG engineers
- Provides improved steering and handling feel
- Long-lasting performance
Whiteline – Camber Adjustable Roll Center Correcting Performance Ball Joint Kit (Part No.KCA472)
from
$185.99
A must for lowered vehicles, Whiteline roll centre, bump steer and camber correction kits are designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.
Product Features:
See More
Product Features:
- Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
- Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
- Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new purchase .
- Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
Dorman – Steering Knuckle (Part No.698-039)
from
$491.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Knuckle (Part No.698-184)
from
$509.99
This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Knuckle (Part No.698-185)
from
$522.99
This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Steering Knuckle (Part No.698-038)
from
$485.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Audi A3 Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Audi A3
You love your A3. So we’ve made it easier than ever to help you find Audi A3 Steering and Chassis Parts in our online catalog. Our inventory holds 71 aftermarket and OEM Steering and Chassis Parts for your Audi A3, ranging from $9.99 to $1,036.99.
We offer parts from 9 brands trusted to make quality Steering and Chassis Parts for your Audi A3. Before you buy, take some time to read through customer reviews. We currently have 588 reviews of Audi A3 Steering and Chassis Parts from previous customers. Some of the top rated parts include Suspension Ball Joint with 4.0 stars and Tie Rod End with 1.0 stars.
Find your A3 Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Audi A3 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Audi A3
Our inventory holds Steering and Chassis Parts for your Audi A3 from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Moog, and Driveworks, all of which can keep that Audi happy.
We have Driveworks parts available for your Audi A3 in categories like Sway Bars. Some of the top-rated Driveworks parts in these categories are:
Top-Rated MOOG Steering and Chassis Parts
Leading MOOG Steering and Chassis Parts
We carry MOOG brand parts for your Audi A3 across several catalog categories, including Sway Bars and Tie Rods. Some of our most reviewed MOOG parts include:
FAQs for Audi A3 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Audi A3?
Out of 71 Steering and Chassis Parts for the Audi A3, the most popular in our inventory are:
What are the top-rated Audi A3 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Audi A3 based on customer reviews/ratings are:
from
$68.99
(1)
Suspension Ball Joint
“Please note although this is an oem replacement, the bolts are not the m12 as factory, requires you to use a t60.”
from
$48.49
(1)
Tie Rod End
“Bought this because the site/item listed as including the dust boot….it does NOT. Makes you wonder what other information is bad. I found out this a”
