Audi A3 Engine Cold Air Intakes

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

“Large Five Layer Performance Air Filter: Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 6 IN tall 360-degree radial flow air filter features a 4-1/2″” flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique One-Piece Housing: The sealed heat-resistant housing, constructed of XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface and a clear sight window that allows for hassle-free filter inspection. An aluminum heat shield panel on the side of the housing deflects hot air emitted from the turbocharger, ensuring the system’s two air inlets bring in the coolest air possible. In addition to the massive auxiliary air inlet, this intake utilizes the vehicle’s OE air inlet with no additional hardware.Reinforced Silicone Intake Tube: This intake system utilizes a flexible silicone intake tube that is reinforced with four layers of nylon material, making it virtually resistant to wear and deterioration. It includes a vacuum hose fitting, along with an aluminum insert that easily mates the intake tube to the air filter.Hassle-Free Installation: Stainless-steel clamps and a silicone inlet trim are included for strength and durability. Momentum GT’s innovative filter-to-housing design minimizes the total number of parts, making for a fast and easy installation.Fitment Note: This item will only fit models equipped with 45TFSI engine.”

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

This Momentum GT intake system outflows the factory intake by 48%. The one-piece sealed housing includes auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.

“Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2″” tall 360-degree radial flow air filter features a 3-1/2″” flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique One-Piece Housing:The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented/patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A clear round sight window, resembling the VW logo, allows for hassle-free filter inspection without having to disassemble your system. The housing incorporates the OE air inlet and features an additional auxiliary air inlet that can be plugged if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Stainless-steel clamps and a silicone coupling are included for strength and durability, while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Fitment Note:This item does not fit Audi A3 models equipped with the 40 TFSI engine.”

This Momentum GT intake system outflows the factory intake by 48%. The one-piece sealed housing includes auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

The AEM 21-750 Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Audi A4 And A5 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box location And can optionally be protected by an AEM embossed heat shield which is designed to reduce intake air temperature And increase horsepower. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the AEM 21-750 vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

“This aFe POWER Pro 5R air filter is a 7″” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. One piece 3 IN mandrel-bent wrinkle-black powder-coated aluminum intake tube directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque. aFe developed this sturdy 18 gauge steel wrinkle-black powder-coated heat shield to mount onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations. Premium hardware and clamps are used to securely mount the high flow air filter and the intake tube.”