Audi A3 Alternators and Starters

Bosch has been a major supplier of new alternators to Original Equipment vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators. Bosch Premium Alternators are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions.

Product Features:

• Full-load tested to guarantee compliance with Bosch’s strict performance specifications
• 100% factory tested, units are remanufactured (not rebuilt)
• Built to last – uses high quality materials and the most technologically advanced developments.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components for the Rotating Electri

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

• Built to last using the highest quality materials and the most technologically advanced manufacturing processes
• Remanufactured using more new parts than any other unit
• 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
• Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
• Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
• 100% new long life self-lubricating brushes
• Gear train all new bushings
• Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
• Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
• Commutator remachined to Bosch tight tolerances
• Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
• Armature continuity tested, gauged, straightened and shimmed
• All electrical connections resoldered
• All shaft splines and load bearing surfaces lubricated with OE high temperature grade

WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components for the Rotating Electri

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

More and more performance, less and less consumption – in order to meet the high demands placed on modern engines, automobile manufacturers demand the absolute highest levels of performance from the engine components used. The oil circuit is of central importance here, as only clean engine oil can permanently ensure consistent engine performance. If the circulating oil is not permanently freed of impurities and combustion residues, protection from wear is no longer guaranteed. In the worst case, this may even damage the engine. If you want to play it safe when choosing an oil filter, choose MANN-FILTER. They are designed for modern high-performance oils and can stand up to even the most demanding technical challenges. As the application areas of oil filters and the demands placed on them vary, MANN-FILTER oil filters are available in different designs.

Product Features:

• Outstanding dirt holding capacity
• Prolongs service intervals and continues to meet the technical requirements of high-performance engines
• Offers even faster and optimized oil supply when starting the engine

CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications. By fully understanding how the alternator and the voltage regulator interact ensures that the CARQUEST volt

Product Features:

• CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
• CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
• CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
• CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.

The INA Alternator Pulley is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

This Litens supplied OAP is manufactured by the original equipment (O.E.) manufacturer. This replacement pulley is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Under rapid engine deceleration, the pulley disengages the alternator from the belt drive system, allowing the alternator to freewheel, re-engaging when the RPM increases. The OAP alternator pulley ensures smooth, quiet performance. The OAP is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component. Under normal driving conditions, the original pulley will require replacement in approximately 70,000 – 90,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Original Equipment Design.
• Protects the front-end accessory drive components
• New seal cap included with the OAP (Always ensure the cap is installed after installation)
• Tools Required – 17mm Spline Bit Driver (included)
• Installation instructions included

The INA Alternator Decoupler Pulley is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. INA Alternator Decoupler Pulleys provide vibration isolation within the Accessory Belt Drive System resulting in smoother engine performance and efficiency and increased belt and component life.

Product Features:

• Torsion spring absorbs engine vibration for quieter, smoother ride
• Premium Original Equipment replacement
• Provides performance and dependability

Litens Automotive is the original equipment supplier to Audi/VW for this decoupling alternator pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Decoupling pulleys are engine specific and should never be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 60,000 – 70,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Patented Original Equipment Design.
• Protects the alternator and other front-end accessory drive components.
• Installation instructions included.
• New plastic cap included with the OAD.
• Tools Required – Litens recommends using a long 10mm 12 point driver bit (also known as a triple square) and a 17×20 spline tool such as a Metal Nerd MNXZ10 and a Miller Special Tools P/N 8823 and a torque wrench.
• Professional mechanics can install this replacement OAD in approximately 2 hour. During alternator replacement, belts, tensioners, and routing pulleys should be inspected.
• 56.2mm O.D.; 17mm I.D; 40.6mm width; ribbed running surface for a 6-rib serpentine belt; high-grade steel construction. 17mm Spline bit driver Included for ease of installation.

This Litens supplied OAP is manufactured by the original equipment (O.E.) manufacturer. This replacement pulley is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Under rapid engine deceleration, the pulley disengages the alternator from the belt drive system, allowing the alternator to freewheel, re-engaging when the RPM increases. The OAP alternator pulley ensures smooth, quiet performance. The OAP is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component. Under normal driving conditions, the original pulley will require replacement in approximately 70,000 – 90,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Steering column jammed or ignition switch not working? This ignition lock housing is a direct replacement for an inoperable original equipment lock housing to help restore ignition lock functions.

Product Features:

• Direct replacement – this ignition lock housing matches the fit and function of the original equipment lock housing
• Durable materials – this lock housing is made from quality materials for reliable service
• Easy to install – no special tools required to install this lock housing
• Quality tested – this part has undergone vehicle try-on and material testing

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

Ignition Lock Assemb