Audi 90 Alternators and Starters

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

• Application matched components ensure the charging system can be returned to like new condition.

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

• Application matched components ensure the charging system can be returned to like new condition.

WAI 100% NEW starters are built by an OE manufacturer with 100% new components to ensure the highest level of quality and the latest technology that meet the tightest tolerances and specifications. WAI 100% NEW starters are built with unmatched quality to deliver exceptional durability and reliability. They are designed to meet or exceed OE performance, fit, form, and function right out of the box, and are specifically designed to deliver unmatched starting power and a long service life. Our premium, easy-to-install starter is built to fit your vehicle and backed by a limited warranty.

Product Features:

• 100% NEW unit and all components.
• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

WAI 100% NEW starters are built by an OE manufacturer with 100% new components to ensure the highest level of quality and the latest technology that meet the tightest tolerances and specifications. WAI 100% NEW starters are built with unmatched quality to deliver exceptional durability and reliability. They are designed to meet or exceed OE performance, fit, form, and function right out of the box, and are specifically designed to deliver unmatched starting power and a long service life. Our premium, easy-to-install starter is built to fit your vehicle and backed by a limited warranty.

Product Features:

• 100% NEW unit and all components.
• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability

Product Features:

• Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
• Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
• Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
• Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
• Automotive starters and alternators are backed by the Bosch Ultimate Protection Plan when unit is registered at the time of purchase: 2 year, 24 hour Roadside assistance; vehicle is jumped or towed for free up to 50 miles

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

This 100% NEW alternator from WAI is a premium choice for those seeking reliability and performance. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. Its advanced voltage regulator protection guards against transient voltage spikes, preventing potential battery damage, while the low saturation voltage minimizes heat dissipation for enhanced durability. The high-power rectifier assembly, featuring open junction press-fit diodes, is designed to keep the unit running cool even under demanding conditions. Fully compliant with ECU communication, this alternator guarantees seamless integration with your vehicle’s system. Each unit comes with a printed copy of test results, providing transparency and confidence in its performance from the very first use. Built for long-lasting efficiency, this alternator delivers exceptional value for your vehicle’s electrical system.

Product Features:

• 100% NEW unit and all components.
• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Designed for enhanced durability, the alternator’s advanced construction minimizes heat dissipation, ensuring reliable performance even under demanding conditions.
• Rigorously tested for reliability and durability, ensuring consistent performance and peace of mind for long-term use.

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

Product Features:
• Built to last using the highest quality materials and the most technologically advanced manufacturing processes
• Remanufactured using more new parts than any other unit
• 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
• Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
• Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
• Rectifier 100 % tested (new on Ford)
• Diodes 100% tested (replaced with new as required)
• Rotor 100% performance-tested for maximum electrical output
• 100% new long life sealed bearings with special high load, high temperature grease
• Stator 100% insulation and phase balance tested
• Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
• 100% new long life self-lubricating brushes
• 100% new clutch pulleys
• All terminals, insulators and hardware provided

This 100% NEW alternator from WAI is a premium choice for those seeking reliability and performance. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. Its advanced voltage regulator protection guards against transient voltage spikes, preventing potential battery damage, while the low saturation voltage minimizes heat dissipation for enhanced durability. The high-power rectifier assembly, featuring open junction press-fit diodes, is designed to keep the unit running cool even under demanding conditions. Fully compliant with ECU communication, this alternator guarantees seamless integration with your vehicle’s system. Each unit comes with a printed copy of test results, providing transparency and confidence in its performance from the very first use. Built for long-lasting efficiency, this alternator delivers exceptional value for your vehicle’s electrical system.

Product Features:

• 100% NEW unit and all components.
• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Designed for enhanced durability, the alternator’s advanced construction minimizes heat dissipation, ensuring reliable performance even under demanding conditions.
• Rigorously tested for reliability and durability, ensuring consistent performance and peace of mind for long-term use.

The Bosch Premium Alternator, remanufactured to deliver 90 amps of power, is engineered for exceptional performance and reliability. Designed with precision, it undergoes full-load testing to meet Bosch’s rigorous performance standards, ensuring dependable operation in demanding conditions. Unlike rebuilt units, this alternator is 100% factory-tested and remanufactured using high-quality materials and cutting-edge technology, offering superior durability and longevity. With a 12 VDC voltage rating and a clockwise rotation direction, it is built to seamlessly integrate into your vehicle’s electrical system. Whether you’re replacing a worn-out alternator or upgrading for better performance, this unit provides outstanding value and peace of mind.

Product Features:

Product Features:
• Full-load tested to guarantee compliance with Bosch’s strict performance specifications
• 100% factory tested, units are remanufactured (not rebuilt)
• Built to last – uses high quality materials and the most technologically advanced developments.
• Seamlessly integrates with your vehicle’s electrical system for reliable and efficient operation.
• Engineered for demanding conditions, ensuring consistent performance and peace of mind.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672