Audi 5000 Quattro Oil and Lubricants
Top Audi 5000 Quattro Oil and Lubricants Categories
We carry over 70 Oil and Lubricants in inventory for the Audi 5000 Quattro. If you’re looking for aftermarket Oil and Lubricants for your Audi 5000 Quattro, check out all these categories:
Essential Audi 5000 Quattro Oil and Lubricants
FRAM – 5W-20 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F662-5QT)
from
$25.99
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
- Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C3C)
from
$11.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ACEA A5/B5, C2
- Exceeds API SP/SN PLUS/SN/SM
- GM dexos1 Gen 3
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
FRAM – 10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F665-5QT)
from
$25.99
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
- Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart (Part No.F640-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)
from
$29.99
Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.
Product Features:
See More
Product Features:
- Premium-quality base oils and anti-wear additives that help extend engine life
- Superior protection against engine sludge
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
Castrol – EDGE High Mileage 10W-40 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15989F)
from
$12.99
Castrol EDGE High Mileage 10W-40 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6C)
from
$10.49
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- Meets or exceeds the following specifications:
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SM
- ILSAC GF-6
Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil, 5 Quart (Part No.1598B1)
from
$37.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ILSAC GF-6
- Exceeds API SP/SN PLUS/SN/SM
- GM dexos1 Gen 3
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – EDGE 5W-20 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C82)
from
$11.99
Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ILSAC GF-6
- Exceeds API SP/SN PLUS/SN/SM
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C945-B1
- Meets Ford WSS-M2C960-A1
Castrol – EDGE 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152E4E)
from
$11.99
Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SP/SN PLUS/SN/SM
- ILSAC GF-6
Castrol – Conventional 30W Engine Oil – Protects against thermal breakdown – 1 Qt (Part No.151B00)
from
$8.49
Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.
Product Features:
See More
Product Features:
- Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
- Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
- Engineered for greater protection against thermal breakdown
- Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
- Made in the usa
- Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.
FRAM – 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)
from
$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
GKN Drivetech – CV Joint Grease (Part No.K6001111479LOB)
from
$7.03
CV Joint Grease
Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)
from
$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.
Product Features:
See More
Product Features:
- Original Febi spare parts
- Proven OE: Febi fulfills all eligibility requirements
- High driving comfort through the use of perfectly matched materials and impeccable design
Audi 5000 Quattro Oil and Lubricants Categories
Helping You Find the Right Oil and Lubricants for Your Audi 5000 Quattro
You love your 5000 Quattro. So we’ve made it easier than ever to help you find Audi 5000 Quattro Oil and Lubricants in our online catalog. Our inventory holds 70 aftermarket and OEM Oil and Lubricants for your Audi 5000 Quattro, ranging from $6.49 to $38.99.
We offer parts from 4 brands trusted to make quality Oil and Lubricants for your Audi 5000 Quattro. Before you buy, take some time to read through customer reviews. We currently have 41,960 reviews of Audi 5000 Quattro Oil and Lubricants from previous customers. Some of the top rated parts include EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart with 4.9 stars and GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart with 4.8 stars.
Find your 5000 Quattro Oil and Lubricants here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Audi 5000 Quattro part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Oil and Lubricants Brands for Your Audi 5000 Quattro
Our inventory holds Oil and Lubricants for your Audi 5000 Quattro from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Castrol, Fram, and GKN Drivetech, all of which can keep that Audi happy.
We have Castrol parts available for your Audi 5000 Quattro in categories like Motor Oil. Some of the top-rated Castrol parts in these categories are:
Top-Rated Castrol Oil and Lubricants
Leading Castrol Oil and Lubricants
We carry Castrol brand parts for your Audi 5000 Quattro across several catalog categories, including Motor Oil. Some of our most reviewed Castrol parts include:
FAQs for Audi 5000 Quattro Oil and Lubricants
What are the most purchased Oil and Lubricants for the Audi 5000 Quattro?
Out of 70 Oil and Lubricants for the Audi 5000 Quattro, the most popular in our inventory are:
from
$27.99
This product is not rated
5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart
Engine Oil
What are the top-rated Audi 5000 Quattro Oil and Lubricants?
Top-rated Oil and Lubricants for your Audi 5000 Quattro based on customer reviews/ratings are:
