AMC Rambler Performance and Racing Products

Essential AMC Rambler Performance and Racing Products

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

Differential Pinion Solid Spacer Kit w/Shims

from

$22.79


Product Features:
  • FORD 9″ SOLID SPACER KIT
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Super Intake Manifold Bolts

from

$27.49
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More

Edelbrock – Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel (Part No.4431)

Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel

from

$75.99
The Edelbrock #4431 Signature Series Valve Covers are designed for AMC/Jeep 290-304-343-360-390-401 V8 ’67-91 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:
  • AMC/Jeep 290-401 V8 1967-91
  • Short
  • Chrome Steel
  • Set Of Two
  • Rubber Grommets For Breather
See More

Mr. Gasket – Oilpangasketset (Part No.890)

Oilpangasketset

from

$42.49
Manufactured from high-density cork/rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For original equipment replacement and high performance street.

Product Features:
  • Manufactured from high-density cork /rubber blend gasket material
  • Provides excellent sealing and durability
  • Complete with molded rubber front/rear oil pan end seals where applicable
  • For OE replacement and high performance street use
See More

MSD Ignition – Distributor; AMC V8; Ready-to-Run (Part No.8523)

Distributor; AMC V8; Ready-to-Run

from

$647.99
Finally an answer for your amps worn out breaker points distributor! This Ready-to-Run Pro-Billet distributor has a built-in inductive module that produces up to 7.5 A to create a high voltage spark at the plug. This spark improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance. Since this distributor has its own ignitions module there is no need to run an MSD Ignition control. Installation of the distributor is simple with only three wires to connect with the supplied Weathertight harness. Under the MSD cap is a mechanical advance that is supplied with different advance springs and stop bushings, giving you 24 curves to choose from. the ready to run AMC distributor also has a vacuum advance canister and is supplied with everything you need for installation.

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • Vacuum advance canister for improved economy (can be locked out)
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • CNC machined billet aluminum housing and billet aluminum base
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Includes built-in Rev Limiter
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Mallory – Distributor Condenser (Part No.401)

Distributor Condenser

from

$17.09
Distributor Condenser

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$428.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Mallory – Distributor Drive Gear (Part No.29425)

Distributor Drive Gear

from

$117.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:
  • Replacement Distributor Gear
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6087)

Oil Pan Bolt Kit

from

$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

FAG US – CUP (Part No.LM48510)

CUP

from

$7.69
CUP

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Edelbrock – Pre 1970 AMC Head Bolt Kit (Part No.8531)

Pre 1970 AMC Head Bolt Kit

from

$387.99
Product Features:
  • Hex Head Drive Type
  • 3.78 in. Length
  • 0.437 in. Thread Diameter
  • Coarse Thread Type
  • Chromoly Material
See More

Edelbrock – Cylinder Head Gasket Set for AMC/Jeep (Part No.7329)

Cylinder Head Gasket Set for AMC/Jeep

from

$107.99
Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″ bore size, .045″ compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Ede

Product Features:
  • 4.275 in. Cylinder Bore Diameter
  • 0.045 in. Thickness
  • 10.60cc Volume
  • Gray Color
  • Two Piece Configuration
See More

Edelbrock – Exhaust Manifold Gasket Set for AMC/Jeep (Part No.7239)

Exhaust Manifold Gasket Set for AMC/Jeep

from

$34.99
Product Features:
  • 0.0625 in. Thickness
  • 1.80 in. x 1.30 in. Port Size
  • For AMC Engines
  • Gray Color
  • Two Piece Configuration
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Accel – Custom Fit Spark Plug Wire Set (Part No.8843)

Custom Fit Spark Plug Wire Set

from

$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

Unilite Breakerless Ignition Conversion Kit

from

$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Edelbrock – Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401 (Part No.7213)

Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401

from

$27.99


Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Helping You Find the Right Performance and Racing Products for Your AMC Rambler

You love your Rambler. So we’ve made it easier than ever to help you find AMC Rambler Performance and Racing Products in our online catalog. Our inventory holds 30 aftermarket and OEM Performance and Racing Products for your AMC Rambler, ranging from $7.69 to $647.99.

We offer parts from 7 brands trusted to make quality Performance and Racing Products for your AMC Rambler. Before you buy, take some time to read through customer reviews. We currently have 3,011 reviews of AMC Rambler Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Distributor Cap And Rotor Kit with 5.0 stars.

Find your Rambler Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your AMC Rambler part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your AMC Rambler

Our inventory holds Performance and Racing Products for your AMC Rambler from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Mr. Gasket, and Edelbrock, all of which can keep that AMC happy.
We have Mallory parts available for your AMC Rambler in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Mallory Kit: Unil Conv: Delco: V8
from $134.99
(1)
Mallory Kit: Unil Conv: Delco: V8
Performance Ignition Kits
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
Performance Ignition Parts

Top-Rated Edelbrock Performance and Racing Products

Leading Edelbrock Performance and Racing Products

We carry Edelbrock brand parts for your AMC Rambler across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:

FAQs for AMC Rambler Performance and Racing Products

What are the most purchased Performance and Racing Products for the AMC Rambler?

Out of 30 Performance and Racing Products for the AMC Rambler, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Thermocap Radiator Cap
from $48.09
This product is not rated
Thermocap Radiator Cap
Performance Radiator Caps

What are the top-rated AMC Rambler Performance and Racing Products?

Top-rated Performance and Racing Products for your AMC Rambler based on customer reviews/ratings are:
Blaster 2 Coil: High Performance Ignition Upgrade
from $49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
Distributor Cap And Rotor Kit
from $48.49
(1)
Distributor Cap And Rotor Kit
“Great product and good price”
Oil Pan Bolt Kit
from $30.19
(1)
Oil Pan Bolt Kit
“Fit my 95 Ford F-150 when I replaced the oil pan (which is a whole other story). The bolts were a little shorter than expected but in the end, did the”