AMC Performance Engines

Name: Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Brand: Edelbrock
SKU: 2131
Price: 424.99 USD
Rating: 5.0 (1 reviews)

Performance Engines for Your AMC

Replacing your AMC Performance Engines shouldn’t cost you an arm and a leg. That’s why we offer plenty of options for you to choose from, making it easy to find top rated Performance Engines brands at a fraction of the cost.

Essential AMC Performance Engines

from

$424.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Not for Stock Motorcraft Spread Bore Carburetor
Two Center Bolt Holes are Offset

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$17.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:

Zinc plated to resist corrosion and provide a clean professional appearance
Made from Grade 5 steel for strength and durability
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Allen (socket) Head
Zinc Plated For Protection

from

$27.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$171.99

The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

Product Features:

Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
Intake: 1.13″x2.21″ Port/.030″ Thick
Exhaust: 1.80″x1.30″ Port
3/16″ Valve Cover
Multi Piece Configuration

from

$813.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
54cc Dual-Quench Combustion Chamber
Offers Improved Mid To High Lift Flow
Thicker Deck Surfaces than Other Brands

from

$504.99

Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Includes Std Oil Fill ; PCV ; A/C Accy Bosses
Not for Exhaust-Heat Chokes – No Exhaust Crossover

from

$387.99

Product Features:

Hex Head Drive Type
3.78 in. Length
0.437 in. Thread Diameter
Coarse Thread Type
Chromoly Material

from

$252.99

Product Features:

Hex Head Drive Type
3.78 in. Length
0.5 in. Thread Diameter
Coarse Thread Type
Chromoly Material

from

$206.99

Product Features:

Case-Hardened Tubing
Surface Hardening
Welded Ends
0.3125 in. Diameter
Use with or without Hardened Steel Guideplates

from

$141.99

Product Features:

Non-Rotator Type
1.550 in. Outer Diameter
.190 Wire Size
Single Coil Spring Type
Set of 16

from

$107.99

Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″ bore size, .045″ compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Ede

Product Features:

4.275 in. Cylinder Bore Diameter
0.045 in. Thickness
10.60cc Volume
Gray Color
Two Piece Configuration

from

$42.49

Manufactured from high-density cork/rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For original equipment replacement and high performance street.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
Provides excellent sealing and durability
Complete with molded rubber front/rear oil pan end seals where applicable
For OE replacement and high performance street use

from

$27.49

These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:

Assures Accurate Torque App
Prevents Galling Manifold
Grade 5 Material
Black Oxide Coasted

Popular AMC Performance Engines Categories

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Engine Cylinder Head Gaskets

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Springs

Performance Engine Oil Pan Gaskets

Performance Intake Manifold Hardware

Performance Engine Cylinder Head Bolts

Performance Engine Push Rods

Performance Engine Cylinder Heads

Shop AMC Performance Engines today. Advance Auto Parts carries top rated Performance Engines brands for your AMC. Search through our selection of popular aftermarket or OEM parts, we are confident you can find the Performance Engines deal that will fit your vehicle hassle-free.

Compare before you buy, we offer customer reviews and star ratings on all of our AMC Performance Engines. Once you have reviewed your options and selected the deal that fits your budget, all that is left for you to decide is how to have your new AMC parts delivered. You can either have the Performance Engines shipped directly to you or you can pick them up at your local Advance Auto Parts store.

Start shopping below and watch your savings grow!

AMC Performance Engines

Performance Engines for Your AMC

Essential AMC Performance Engines

Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Edelbrock – Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401 (Part No.7213)

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)

Edelbrock – Engine Cylinder Head (Part No.60129)

Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)

Edelbrock – Pre 1970 AMC Head Bolt Kit (Part No.8531)

Edelbrock – 1970 – Later AMC Head Bolt Kit (Part No.8532)

Edelbrock – Pushrod Set for AMC 343-401 (Part No.9637)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Edelbrock – Cylinder Head Gasket Set for AMC/Jeep (Part No.7329)

Mr. Gasket – Oilpangasketset (Part No.890)

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Popular AMC Performance Engines Categories

Compare Deals on AMC Performance Engines

Performance Engines for Popular AMC Models

More Popular Parts for All Makes