AMC Ambassador Performance and Racing Products
Top AMC Ambassador Performance and Racing Products Categories
We carry over 44 Performance and Racing Products in inventory for the AMC Ambassador. If you’re looking for aftermarket Performance and Racing Products for your AMC Ambassador, check out all these categories:
Essential AMC Ambassador Performance and Racing Products
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Distributor Condenser (Part No.401)
from
$17.09
Distributor Condenser
Accel – Distributor Cap And Rotor Kit (Part No.8124)
Mr. Gasket – Oil Pan Bolt Kit (Part No.6087)
from
$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$498.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)
from
$27.49
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
Product Features:
See More
Product Features:
- Assures Accurate Torque App
- Prevents Galling Manifold
- Grade 5 Material
- Black Oxide Coasted
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$141.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Edelbrock – Pre 1970 AMC Head Bolt Kit (Part No.8531)
from
$387.99
Product Features:
See More
- Hex Head Drive Type
- 3.78 in. Length
- 0.437 in. Thread Diameter
- Coarse Thread Type
- Chromoly Material
Edelbrock – Cylinder Head Gasket Set for AMC/Jeep (Part No.7329)
from
$107.99
Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″ bore size, .045″ compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Ede
Product Features:
See More
Product Features:
- 4.275 in. Cylinder Bore Diameter
- 0.045 in. Thickness
- 10.60cc Volume
- Gray Color
- Two Piece Configuration
Mr. Gasket – Oilpangasketset (Part No.890)
from
$42.49
Manufactured from high-density cork/rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For original equipment replacement and high performance street.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- Provides excellent sealing and durability
- Complete with molded rubber front/rear oil pan end seals where applicable
- For OE replacement and high performance street use
MSD Ignition – Distributor; AMC V8; Ready-to-Run (Part No.8523)
from
$647.99
Finally an answer for your amps worn out breaker points distributor! This Ready-to-Run Pro-Billet distributor has a built-in inductive module that produces up to 7.5 A to create a high voltage spark at the plug. This spark improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance. Since this distributor has its own ignitions module there is no need to run an MSD Ignition control. Installation of the distributor is simple with only three wires to connect with the supplied Weathertight harness. Under the MSD cap is a mechanical advance that is supplied with different advance springs and stop bushings, giving you 24 curves to choose from. the ready to run AMC distributor also has a vacuum advance canister and is supplied with everything you need for installation.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CNC machined billet aluminum housing and billet aluminum base
- Built-in module produces a 7.5 amp single spark through high rpm
- Includes built-in Rev Limiter
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Edelbrock – Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel (Part No.4431)
from
$75.99
The Edelbrock #4431 Signature Series Valve Covers are designed for AMC/Jeep 290-304-343-360-390-401 V8 ’67-91 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
Product Features:
See More
Product Features:
- AMC/Jeep 290-401 V8 1967-91
- Short
- Chrome Steel
- Set Of Two
- Rubber Grommets For Breather
Edelbrock – Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401 (Part No.7213)
from
$27.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Edelbrock – Engine Cylinder Head (Part No.60129)
from
$813.99Product Features:
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- 54cc Dual-Quench Combustion Chamber
- Offers Improved Mid To High Lift Flow
- Thicker Deck Surfaces than Other Brands
Mallory – Distributor Drive Gear (Part No.29425)
from
$117.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Edelbrock – Pushrod Set for AMC 343-401 (Part No.9637)
from
$206.99
Product Features:
See More
- Case-Hardened Tubing
- Surface Hardening
- Welded Ends
- 0.3125 in. Diameter
- Use with or without Hardened Steel Guideplates
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Accel – Custom Fit Spark Plug Wire Set (Part No.8843)
from
$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.
Product Features:
See More
Product Features:
- 8.8mm Graphite Suppression
- Silicone Spark Plug Boots
- 550 Degree Double Silicone Construction
- Fiberglass Braid
- Carbon/Graphite Core
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
Energy Suspension – Motor Mount (Part No.2.1102G)
from
$43.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
AMC Ambassador Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your AMC Ambassador
You love your Ambassador. So we’ve made it easier than ever to help you find AMC Ambassador Performance and Racing Products in our online catalog. Our inventory holds 44 aftermarket and OEM Performance and Racing Products for your AMC Ambassador, ranging from $7.69 to $813.99.
We offer parts from 10 brands trusted to make quality Performance and Racing Products for your AMC Ambassador. Before you buy, take some time to read through customer reviews. We currently have 23,051 reviews of AMC Ambassador Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet with 5.0 stars.
Find your Ambassador Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your AMC Ambassador part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your AMC Ambassador
Our inventory holds Performance and Racing Products for your AMC Ambassador from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Edelbrock, and Mr. Gasket, all of which can keep that AMC happy.
We have Mallory parts available for your AMC Ambassador in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Top-Rated Edelbrock Performance and Racing Products
Leading Edelbrock Performance and Racing Products
We carry Edelbrock brand parts for your AMC Ambassador across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:
from
$428.99
(55)
Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
Performance Carburetors
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
from
$451.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
FAQs for AMC Ambassador Performance and Racing Products
What are the most purchased Performance and Racing Products for the AMC Ambassador?
Out of 44 Performance and Racing Products for the AMC Ambassador, the most popular in our inventory are:
from
$42.49
(54)
Super Stock Replacement Coil for Improved Performance, Starting, and Power
Performance Coils
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
What are the top-rated AMC Ambassador Performance and Racing Products?
Top-rated Performance and Racing Products for your AMC Ambassador based on customer reviews/ratings are:
from
$49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
from
$494.99
(3)
Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”
from
$435.99
(2)
Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install with matching Edelbrock 1107 intake manifold. Clear instructions with DVD. I had to flip my carb 180 degs so as to interface with my flat”
