2025 Toyota Tacoma Drivetrains

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
• STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
• INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
• RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

• The cross is hot forged for the higher torque and horsepower
• The bearing cups are made by cold forging, having higher strength and better rigidity
• Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
• Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
• Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
• Snap rings are held to strict tolerances to ensure proper cup position and retention
• Nitrile rubber seals to optimize grease retention and reduce contamination

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
• STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
• INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
• RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

Universal Joint – Brute Force

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

• The cross is hot forged for the higher torque and horsepower
• The bearing cups are made by cold forging, having higher strength and better rigidity
• Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
• Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
• Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
• Snap rings are held to strict tolerances to ensure proper cup position and retention
• Nitrile rubber seals to optimize grease retention and reduce contamination

Universal Joint

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

• The cross is hot forged for the higher torque and horsepower
• The bearing cups are made by cold forging, having higher strength and better rigidity
• Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
• Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
• Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
• Snap rings are held to strict tolerances to ensure proper cup position and retention
• Nitrile rubber seals to optimize grease retention and reduce contamination

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
• GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

• OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
• Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
• The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
• Zerk allows for lubricating at regular intervals to help extend the life of the part.

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
• KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
• Cross forging shape and flash provide easier installation and high strength

Universal Joint

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Universal Joint – Brute Force

Universal Joint

Universal Joint

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

• The cross is hot forged for the higher torque and horsepower
• The bearing cups are made by cold forging, having higher strength and better rigidity
• Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
• Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
• Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
• Snap rings are held to strict tolerances to ensure proper cup position and retention
• Nitrile rubber seals to optimize grease retention and reduce contamination

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

• BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
• GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
• KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

Product Features:

• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
• KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
• Cross forging shape and flash provide easier installation and high strength

Product Features:

• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
• KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
• Cross forging shape and flash provide easier installation and high strength