2025 Jeep Wrangler Body Parts

Westin Snyper Triple Tube Rock Rails are frame mounted Jeep(R) side steps that protect vehicle rocker panels. Made of three 16 gauge welded tube construction. Full-length step area features louvered styling and a texture coated finish for slip resistance and easy cleaning. A welded plate that features a laser cut Snyper logo is welded between the 2 inch upper and lower tubes to provide added support. Available for 2 door and 4 door Jeep(R) Wrangler in textured black finish.

Product Features:

• Protect Rocker Panels From Damage
• Made Of 16 Gauge Steel
• 2 In. Diameter .120 In. Thick Wall Tube
• Mount Directly To Vehicle Frame
• Full-Length Step Area Features Louvered Styling
• Slip-Resistant Texture Coated Step Area
• Welded Support Plate With Laser-Cut Snyper Logo
• Available For 2 Door And 4 Door Jeep Wrangler
• Bolt On; No Drill Installation

Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Product Features:

• Corrosion Resistant Black Powder-Coated Stainless Steel
• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Features A Notched Bar Design With Heavy-Duty Step Plate
• Includes Rust Resistant Stainless Steel Step Plates
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

Westins Pro Traxx 5 Oval Nerf Step Bars feature a 5″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 5 in. Wide Step Area With Westin Logo
• Bolt On Installation
• No Drilling Required On Most Apps

Upgrade your vehicle with a set of heavy duty Westin’s HDX Xtreme Nerf Step Bars. Key design features include: Oversized step areas for easier cab entry and exit. A solid 1-piece construction and a textured powder coat finish. Strategically engineered step locations guarantee ease of access while also complementing the contours of your vehicle.

Product Features:

• Mount Kit Included
• Oversized Step Areas For Easier Cab Entry And Exit
• Injection Molded Polymer Step Pad
• Fully Welded Construction
• Style Compliments HDX Bumpers
• Registered US Patent

Westins Front Tube Fenders are made to protect from flying debris and provide a high clearance for Jeeps riding on large tires. Made of textured black powder coated 14 gauge, 6 7/16″ wide steel with a 1.5″ diameter welded fender tube. Fenders feature a welded lip design to keep plastic inner fender in place. Fender welt is included for a finished look. Turn signal lights are included and housed within the fender tube. All needed installation hardware is included with this bolt-on, no drill installation. Sold in pairs. Rear Fenders available, sold separately.

Product Features:

• Made Of 14 Gauge Steel
• Front Fenders Are 6.5 in. Wide
• 1.5 in. Diameter Tube
• 12 Gauge Thick Wall
• Allows You To Run Big Tires Without Lifting
• Front Tube Fenders Include Running Lights And Turn Signal
• Front Fenders Sold In Pairs
• Mating Seam Is Silicone Sealed To Prevent Rust
• Welded Lip Design Keeps Plastic Inner Fender In Place
• Fender Welt Included For A Finished Look
• Bolt-On; No Drilling Required

Westins HDX Drop Nerf Step Bars provide the rugged look and function that truck owners need and want. They feature a solid 1-piece steel construction and heavy duty punch plates creating high traction step areas. The HDX Drop Nerf Step Bars also feature Westins notched bar design which provides more than 2″ of additional toe/heel placement versus competitive brands. Available in a textured black finish that complements Westin HDX Bumpers. The HDX Drop Steps have vehicle specific applications and include a vehicle specific mount kit, installation hardware and instructions.

Product Features:

• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel For Solid Fit And Rugged Look
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

Upgrade your vehicle with a set of heavy duty Westin’s HDX Xtreme Nerf Step Bars. Key design features include: Oversized step areas for easier cab entry and exit. A solid 1-piece construction and a textured powder coat finish. Strategically engineered step locations guarantee ease of access while also complementing the contours of your vehicle.

Product Features:

• Mount Kit Included
• Oversized Step Areas For Easier Cab Entry And Exit
• Injection Molded Polymer Step Pad
• Fully Welded Construction
• Style Compliments HDX Bumpers
• Registered US Patent

Westins Pro Traxx 5 Oval Nerf Step Bars feature a 5″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 5 in. Wide Step Area With Westin Logo
• Bolt On Installation
• No Drilling Required On Most Apps

Westin Snyper Tubular Rear Fenders are made to protect from flying debris and provide a high clearance for Jeeps riding on large tires. Made of textured black powder coated 14 gauge 4 7/8 in. wide steel with a 1.5 diameter welded fender tube. Fenders feature a welded lip design to keep plastic inner fender in place. Fender welt is included for a finished look. All needed installation hardware is included with this bolt-on no drill installation. Sold in pairs. Front Snyper Tubular Front Fenders available sold separately.

Product Features:

• Protect From Flying Debris
• High Clearance For Jeeps With Large Tires
• Made Of 14 Gauge Steel
• 4 7/8 In. Wide Fender
• 1.5 in. Diameter Tube
• Mating Seam Is Silicone Sealed To Prevent Rust
• Welded Lip Design Keeps Plastic Inner Fender In Place
• Fender Welt Included For A Finished Look
• Sold In Pairs
• Hardware Included

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Jeep Wrangler (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Westins WJ2 Spare Tire Relocator allows Jeep JL owners to accommodate a tire up to 37″ in diameter while maintaining factory design elements such as rear view camera and third brake light functionality. Two 8 gauge steel plates provide added strength to safely re-position the spare outward and upward and at the same time support the added weight of the larger spare tire. The WJ2 Spare Tire Relocator is an innovative upgrade to your Jeep JL, great finish, easy to install and fully functional.

Product Features:

• Accommodates A Tire Up To 37 in. Diameter
• Retains Use Of Factory 3rd Brake Light And Rear View Camera
• Retains Functionality Of Factory Spare Tire Rubber Isolators
• No Modification Of Factory Wiring Required

ARIES offroad Jeep tube door mirrors are highly vibration-resistant, providing a clear, stable view on the trails. They feature 5-inch diameter convex glass for a wide view and have a center-mount ball stud for convenient tilting as needed. These Jeep door mirrors are the perfect Jeep mirrors when doors are off and ARIES tube doors are installed. They mount onto the ARIES Jeep doors with no drilling required and provide a rock-solid view. The mirrors comes with 11-gauge steel brackets and 16-gauge steel mounting plates. They have a highly durable black powder coat finish to protect them against rain, dust, dirt and other offroad elements. Two mirrors are included in this package. Note: For offroad use only.

Product Features:

• Rugged build provides a stable view on offroad Jeeps
• High-strength carbon steel construction with durable black powder coat
• Rock-solid 11-gauge steel brackets with 16-gauge steel mounting plate
• Easy, no-drill installation and quick, as-needed removal
• Fits all ARIES front tube door bolt configurations
• Compatible with most other aftermarket tube doors (drilling may be required)
• 5″ diameter convex glass helps eliminate blind spots for safe maneuvering
• 5/16″ center-mount ball stud for added stability and easy tilt adjustment

Protect your Jeep Wrangler doors from theft! Simply replace the upper hinge nuts with the easy to install McGard Door Locks. Once installed, the locks match the OEM hinge nuts, but can only be removed with the special key tool.

Product Features:

• High security through-hardened steel construction protects against gripping, drilling & cutting.
• The external spin-collar feature turns if attacked by gripping tools to protect against unwanted removal.
• Manufactured in the U.S.A.

Protect your Jeep Wrangler doors from theft! Simply replace the upper hinge nuts with the easy to install McGard Door Locks. Once installed, the locks match the OEM hinge nuts, but can only be removed with the special key tool.

Product Features:

• High security through-hardened steel construction protects against gripping, drilling & cutting.
• The external spin-collar feature turns if attacked by gripping tools to protect against unwanted removal.
• Manufactured in the U.S.A.

Westins WJ2 Full Width Front Bumper with LED Light Bar Mount is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The product is designed to utilize both styles of factory fog lights or round post lights, and adjustable brackets accept Westin or competitor light bars. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Stubby Bumper with LED Light Bar Mount is constructed with 3/16-inch plate steel and features a stout LED light bar mount that accommodates a 20 single row light bar. With Westins new WJ2 Stubby Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper as well as 2 side and 2 front off-road jack points. Adjustable brackets accept Westin or competitor light bars. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate and light bars both sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Full Width Front Bumper is constructed with 3/16-inch plate steel. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! It is designed to utilize both styles of factory fog lights or round post lights. Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep JL / JT, this bumper also comes with a stinger-style angular brush guard. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL or Jeep Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Angular brush guard helps protect the winch and adds an aggressive look
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Westins Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep Wrangler JL or Jeep Gladiator, this bumper is also compatible with the stinger-style angular brush guard #2156050 (not included). The TrailCrusher bumper is fast and easy to install, integrating with the Jeep JL or Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Accepts angular brush guard #2156050 for added winch protection
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring winch and shackle capabilities with a 12.5K rating. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch-and-shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070, roller fairlead #2156071 and winch fairlead mount #15600FB. For added winch protection and an aggressive look on the Jeep JL, a stinger-style angular brush guard #2156050 is available. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear ARIES one-piece bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation and is covered by a three-year warranty.

Product Features:

• Shackle rating of 12,500 lbs. for ultimate off-road functionality
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Center cutout for rear mount trailer hitch receiver tube
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.

Product Features:

• Ideal for cold weather climates.
• Operating temperature range from -40C to 130C
• Works perfectly under extreme temperature changes.
• Used by more then 25 global vehicle manufactures as OE first-fill.