2024 Toyota Camry Catalytic Converters

Keep Your 2024 Toyota Camry in Top Shape with a Quality Catalytic Converter

When it comes to maintaining or upgrading your 2024 Toyota Camry, choosing high-quality parts is crucial for ensuring your vehicle stays in top shape, whether you’re tackling a repair or enhancing performance. At Advance Auto Parts, we know how important it is to find the right Catalytic Converter for your Camry. We currently carry a top Catalytic Converter in stock that is built to last. Whether you’re replacing a damaged Catalytic Converter or looking to upgrade, our selection for the 2024 Toyota Camry ensures you’ll find exactly what you need to keep your vehicle looking and performing its best.

Explore Related Parts

And while you’re here, don’t forget to check out related part categories like Exhaust System Kits to complete your upgrade or repair project. At Advance Auto Parts, we’re proud to offer the parts and expertise to keep your 2024 Toyota Camry running smoothly and looking great.

Essential 2024 Toyota Camry Catalytic Converters

MagnaFlow – California Universal Catalytic Converter – 2.00" (Part No.3322304)

California Universal Catalytic Converter - 2.00"

from

$560.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322304. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Durable 308 stainless steel MIG welds
See More

Walker – CalCat CARB Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.81128)

CalCat CARB Universal Catalytic Converter - 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$516.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
  • BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
See More

Walker – Ultra EPA Direct-Fit Catalytic Converter (Part No.54176)

Ultra EPA Direct-Fit Catalytic Converter

from

$462.99
Product Features:
  • EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter (Part No.23886)

Direct-Fit HM Grade Catalytic Converter

from

$217.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23886. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1984-1995 Toyota Pickup, 1984-1997 Toyota Corolla, and more, this direct-fit catalytic converter also interchanges with OE parts 17410-11690 and 17410-11700, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter (Part No.23002)

Direct-Fit HM Grade Catalytic Converter

from

$418.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23002. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2011 Toyota Camry and 2006-2008 Toyota Solara, this direct-fit catalytic converter also interchanges with OE parts 17410-28551 and 17410-28560, among others. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.52095)

Direct-Fit OEM Grade Catalytic Converter

from

$509.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52095. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2012-2017 Toyota Camry and 2013-2017 Toyota Avalon, this direct-fit catalytic converter also interchanges with OE parts 17410-0V090 and 17410-0V100, among others. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Walker – Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.93236)

Ultra EPA Universal Catalytic Converter - 2" Inlet (ID) 2" Outlet (ID)

from

$206.99
Product Features:
  • EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
  • OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.49311)

Direct-Fit OEM Grade Catalytic Converter with Integrated Exhaust Manifold

from

$1062.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49311. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2006 Toyota Camry and 2002-2003 Lexus ES300, this direct-fit catalytic converter also interchanges with OE parts 25052-20170 and 25052-20140, among others. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter (Part No.26214)

Direct-Fit HM Grade Catalytic Converter

from

$572.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26214. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2006 Toyota Camry and 2002-2003 Lexus ES300, this direct-fit catalytic converter also interchanges with OE parts 17410-0A340 and 17410-0A420, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Walker – Ultra EPA Direct-Fit Catalytic Converter (Part No.54787)

Ultra EPA Direct-Fit Catalytic Converter

from

$435.99
Product Features:
  • EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
See More

Walker – Standard EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.15038)

Standard EPA Universal Catalytic Converter - 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$111.99
Product Features:
  • EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
  • OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – Direct-Fit California Grade Catalytic Converter (Part No.337802)

Direct-Fit California Grade Catalytic Converter

from

$893.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 337802. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1987-1991 Toyota Camry and 1990-1995 Toyota Celica, this direct-fit catalytic converter also interchanges with OE parts 25508-74070 and 25508-74080, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Walker – CalCat Universal Catalytic Converter (Part No.80828)

CalCat Universal Catalytic Converter

from

$182.99
Walker an industry leader for import And domestic applications, offers Walker CalCat Universal Catalytic Converters, available for OBDII (1996 And newer) vehicles And Pre-OBD (1995 And older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker CalCat Catalytic Converters are legal for sale in the state of California, And any state complying with California regulations.

Product Features:
  • Legal for sale in the state of California, complies with C.A.R.B. regulations
  • Stainless steel body with aluminized pipe and heat shields for durability
  • Expandable bushings for custom installation requirements
  • Universal converter may require modification to complete installation
See More

MagnaFlow – California Universal Catalytic Converter – 2.25" (Part No.338105)

California Universal Catalytic Converter - 2.25"

from

$259.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 338105 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter (Part No.50801)

Direct-Fit HM Grade Catalytic Converter

from

$557.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50801. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1992-1996 Toyota Camry and interchanges with OE parts 25508-74150 and 25508-74190. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-873)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$509.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-480)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$605.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter (Part No.24435)

Direct-Fit HM Grade Catalytic Converter

from

$401.99
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24435 helps keep the check engine light off. DIY installation is easy with the proper tools, no cutting or welding required. With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 2010-2011 Toyota Camry and interchanges with OE parts 17410-36140 and 17410-36150, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Walker – Ultra EPA Direct-Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16606)

Ultra EPA Direct-Fit Catalytic Converter with Integrated Exhaust Manifold

from

$885.99
Product Features:
  • EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN – Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE – Features thick OE-style flanges and manifolds for strength and durability
  • OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
See More

Walker – CalCat CARB Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.82601)

CalCat CARB Universal Catalytic Converter - 2.25" Inlet (ID) 2.25" Outlet (ID)

from

$613.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
  • BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.50904)

Direct-Fit HM Grade Catalytic Converter with Integrated Exhaust Manifold

from

$939.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50904. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2018 Lexus ES350, 2005-2019 Toyota Avalon, and more, this direct-fit catalytic converter also interchanges with OE parts 17140-0P020 and 17140-0P041, among others. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – HM Grade Universal Catalytic Converter – 2.00" (Part No.99204HM)

HM Grade Universal Catalytic Converter - 2.00"

from

$179.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.452015)

Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold

from

$760.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452015. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2003 Toyota Camry and 2002-2003 Lexus ES300, this direct-fit catalytic converter also interchanges with OE parts 25052-20170 and 25052-20140, among others. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.452014)

Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold

from

$1062.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452014. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2003 Toyota Camry and 2002-2003 Lexus ES300, this direct-fit catalytic converter also interchanges with OE parts 17140-20080 and 17140-20070, among others. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.00" (Part No.51204)

OEM Grade Universal Catalytic Converter - 2.00"

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Durable 308 stainless steel MIG welds
See More

Walker – CalCat CARB Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.83206)

CalCat CARB Universal Catalytic Converter - 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$298.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
  • BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
See More

MagnaFlow – Direct-Fit HM Grade Catalytic Converter (Part No.27303)

Direct-Fit HM Grade Catalytic Converter

from

$654.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 27303. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2002-2006 Toyota Camry and interchanges with OE parts 17410-28320 and 17410-0H130, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Durable 308 stainless steel MIG welds
See More

Dorman – Manifold Converter – Carb Compliant – For Legal Sale In NY – CA – ME (Part No.673-811)

Manifold Converter - Carb Compliant - For Legal Sale In NY - CA - ME

from

$654.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Most Popular Catalytic Converter for 2024 Toyota Camries

Enhance your 2024 Toyota Camry with this popular Catalytic Converter we have in stock, for $194.99.

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.25" (Part No.51205)

OEM Grade Universal Catalytic Converter - 2.25"

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Durable 308 stainless steel MIG welds
See More

FAQs for 2024 Toyota Camry Catalytic Converters

What’s the price range for 2024 Toyota Camry Catalytic Converters?

We currently have just one Catalytic Converters for the 2024 Toyota Camry in stock: OEM Grade Universal Catalytic Converter – 2.25" and it costs $194.99.

Does Advance Auto Parts sell Catalytic Converters for other Toyota Camry model years?

Yes, we carry Catalytic Converters for 40 model years of Toyota Camries between 1983 and 2023. The following model years are the most popular for Catalytic Converter purchases: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

Does Advance Auto Parts sell Catalytic Converters for any other 2024 Toyota models?

Yes. We stock Catalytic Converters for 1 other popular 2024 Toyota models. Some of the most popular are 2024 4Runner Catalytic Converters and 2024 RAV4 Catalytic Converters.

What types of Catalytic Converters do you sell for my 2024 Toyota Camry?

We currently have just 1 Catalytic Converter in stock for a 2024 Toyota Camry, and as of 11/2/25, it is a Catalytic Converter.

Can I get help with 2024 Toyota Camry Catalytic Converter orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Toyota Catalytic Converters and more.

What is your return policy for Toyota Camry Catalytic Converters?

Advance Auto Parts keeps returns simple. For new Toyota Camry Catalytic Converters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.