Name: SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon
Brand: Valvoline
SKU: 882505
Price: 59.99 USD
Rating: 5.0 (364 reviews)

Essential Oil and Lubricants for 2024 Jeep Grand Wagoneers

from

$59.99

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$6.49

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.

from

$24.99

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$27.99

FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Reduces oil cumsumption
Excellent sludge and varnish protection
Slows engine leaks
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$11.99

Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

Product Features:

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
Exceeds API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$30.99

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Engine Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering superior dispersancy to combat sludge buildup. This premium synthetic blend offers exceptional protection against oil burn-off, surpassing industry standards, and features seal conditioners to help minimize leaks. Engineered with advanced additives, it reduces engine wear and improves fuel economy in 5W-20, 5W-30, and 10W-30 grades. Meeting or exceeding API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, as well as Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, this oil ensures reliable performance and compatibility with a wide range of vehicles. Perfect for drivers seeking durability and efficiency, this 5-quart solution is tailored to keep engines running smoothly while protecting against wear and sludge for long-lasting value.

Product Features:

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
Meets or exceeds the following specifications:
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$32.99

Quaker State Full Synthetic 0W-20 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 0W-20 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving, API SN Plus and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 0W-20 motor oil meets the specifications for: Chrysler MS-6395; GM dexos1 Gen 2; Ford WSS-M2C947-A; Ford WSS-M2C947-B1. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
Provides improved fuel economy (based on the latest industry standard)
Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
Formulated with high resistance to oxidation, keeping the oil fresher for longer.
Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
Maintains required viscosity from start to finish, providing optimal protection
Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.
Versatile Compatibility: Designed for both new and older vehicles, this motor oil is ideal for high-performance vehicles such as sports cars, SUVs, trucks, and minivans.
Enhanced Performance for Modern Engines: Specifically formulated to protect today’s sophisticated engines, including modern turbocharged engines, and suitable for hybrid engines.
Meets Industry Standards: Exceeds the requirements of API SP-Resource Conserving, API SN Plus, ILSAC GF-6a, and meets specifications for Chrysler MS-6395, GM dexos1 Gen 2, Ford WSS-M2C947-A, and Ford WSS-M2C947-B1.

from

$37.99

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$6.49

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

from

$6.49

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$37.99

Pennzoil Platinum Full Synthetic 0W-20 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results; does not apply to SAE 0W-16 or Pennzoil Platinum Euro motor oil), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. Pennzoil Platinum Full Synthetic 0W-20 provides the same engine protection as a 5W-20 and is suitable for use in vehicles currently using SAE 5W-20. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

Full synthetic 0W-20 motor oil that is made with natural gas and designed to maximize engine protection
Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
Provides better fuel economy (based on the latest industry standards)
Keeps pistons cleaner than the toughest industry standard (based on Sequence IIIH results)
Provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30)
Formulated to provide faster low-temperature oil flow and protection in extreme heat
Helps protect engines from loss of power
Meets or exceeds the following OEM requirements: Chrysler MS-6395; GM dexos1 Gen. 3; Ford WSS-M2C9262-A
Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$12.49

Pennzoil Extended Care Full Synthetic motor oil is expertly crafted to combat engine aging and extend the life of your vehicle’s engine. Formulated with a 99.5% pure base oil derived from natural gas, it delivers superior oxidative stability, cold temperature performance, and volatility control, ensuring optimal engine protection in all driving conditions. This premium oil actively prevents engine deposits and sludge formation, keeping your engine clean and running smoothly. Designed to meet the specific requirements of SAE 0W-20 or 5W-20 viscosity grade engines, it is compatible with a wide range of vehicles and driving styles. Whether you’re navigating city streets or taking on long highway drives, this full synthetic oil offers reliable performance and durability, making it an essential choice for maintaining your engine’s health.

Product Features:

Product Features:

Pennzoil Extended Care Full Synthetic helps keep your engine clean by preventing engine deposits and formation of sludge
Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
Recommended for use in all vehicles requiring the use of SAE 0W-20 or 5W-20 viscosity grade engine oils
Pennzoil Extended Care Full Synthetic motor oil is designed to provide reliable performance and durability, ensuring optimal engine protection during both city driving and long highway journeys.

from

$7.99

FRAM Small Engine Oil SAE 10W30 is a high-quality conventional oil designed specifically for small engines, making it an excellent choice for lawn equipment and other similar machinery. With its SAE 10W-30 weight, this oil provides reliable performance across a range of temperatures, ensuring smooth operation and optimal engine protection. Its formulation is tailored to meet the demands of small engines, helping to reduce wear and extend engine life. Packaged in a convenient 1-quart size, it’s perfect for quick refills or routine maintenance. Trust FRAM to deliver the durability and performance your equipment needs to keep running efficiently.

Product Features:

Product Features:

Specifically formulated for small engines to ensure optimal performance and protection.
Reliable SAE 10W-30 weight provides consistent operation across varying temperatures.
Helps reduce engine wear and extend the lifespan of lawn equipment and similar machinery.
Convenient 1-quart packaging allows for easy handling during refills and maintenance.
High-quality conventional oil designed to meet the unique demands of small engine applications.

from

$24.99

FRAM Conventional High Mileage 10W-30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system.
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

from

$32.99

Pennzoil 0W-20 Full Synthetic motor oil is designed to let you go farther between oil changes. It provides better engine protection and is backed by a 10,000-mile protection guarantee to give you peace of mind that your engine is protected now and for all the miles ahead. Pennzoil Full Synthetic motor oil is formulated for longer drain intervals than conventional and synthetic blend motor oils, offers enhanced wear protection in high and low temperatures, provides excellent resistance to oil breakdown in severe environments, and helps prevent sludge and deposit build-up. Suitable for both new and old engines. It also provides the same engine protection as a 5W-20 and is suitable for use in vehicles currently using SAE 5W-20. (Compared to Pennzoil motor oil. Pennzoil Full Synthetic Lubrication Limited Warranty: Protection for up to 10,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

Product Features:

Full Synthetic 0W-20 motor oil provides better engine protection to give you peace of mind
Backed by a 10,000-mile protection guarantee to help you go farther between oil changes
Suitable for both new and old engines
Offers enhanced wear protection in high and low temperatures
Do fewer oil changes compared to conventional motor oil formulated for longer drain intervals than conventional and synthetic blend motor oils
Provides excellent resistance to oil breakdown in severe environments
Helps prevent sludge and deposit build-up
Exceeds the requirements of the following industry specifications: API SP and all previous categories; ILSAC GF-6A
Meets or exceeds the following OEM requirements: Chrysler MS-6395; Ford WSS-M2C962-A1
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$24.99

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

from

$27.99

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 & is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

Faster oil flow at start-up.
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

from

$9.49

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering exceptional protection against sludge, wear, and oil burn-off. This synthetic blend exceeds industry standards for volatility and dispersancy, ensuring your engine stays cleaner and performs better over time. With seal conditioners to minimize leaks and advanced additives to reduce engine wear, it’s engineered to keep your vehicle running smoothly. Compatible with API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, it meets Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, making it a reliable choice for a wide range of vehicles. Additionally, its improved fuel economy in 5W-30 grade adds value by optimizing performance and efficiency. Perfect for drivers seeking durability and superior engine protection in a convenient 1-quart size.

Product Features:

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$37.99

Castrol EDGE 5W-30 Full Synthetic Motor Oil is engineered for drivers seeking peak engine performance and unmatched protection. With a formula that is 3X stronger against viscosity breakdown and delivers 10X better high-stress performance, this oil ensures your engine operates smoothly under demanding conditions. Designed for extended use, it offers up to 20,000 miles or one year between oil changes, making it a cost-effective choice for long-term reliability. Its advanced composition exceeds API SQ/SP/SN PLUS/SN standards and meets stringent requirements from Chrysler and Ford, ensuring compatibility with a wide range of vehicles. The 5W-30 weight provides optimal viscosity control and thermal stability, enhancing fuel economy and safeguarding against sludge buildup. Whether you’re navigating high temperatures or heavy loads, this full synthetic oil delivers superior wear protection and performance in critical areas, making it the ultimate solution for maintaining your engine’s health and efficiency.

Product Features:

Product Features:

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
Exceeds API SQ/SP/SN PLUS/SN
ILSAC GF-7
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C945-B1
Meets Ford WSS-M2C960-A1
Meets Ford WSS-M2C961-A1

from

$7.49

FRAM Engine Oil Full Synthetic SAE 0W-40 is a premium full synthetic motor oil formulated employing the latest additive technology to provide the ultimate protection for your engine. It is designed to deliver increased fuel efficiency and deposit protection even under severe service conditions. This engine oil meets the performance requirements of American, Japanese or European gasoline or diesel-fueled passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids. FRAM Engine Oil Full Synthetic SAE 0W-40 exceeds the demanding engine performance requirements of today’s modern, higher revving sports, performance, and luxury vehicles. It helps maximize engine performance and improve engine efficiency while protecting turbochargers and emission control system catalysts. FRAM Engine Oil Full Synthetic 0W-40 meets the requirements of ACEA A3/B4 and API SP.

Product Features:

Exceptional Film Strength.
Excellent Protection for Metal Components from Rust, Corrosion and Wear.
Superior Oxidation Stability.
Outstanding Shear Stability.
Improved fuel economy.
Reduces fuel costs without sacrificing engine protection.
LSPI (Low Speed Pre-Ignition) Protection Throughout the Drain Interval.
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: Formulated with the latest additive technology, FRAM Engine Oil Full Synthetic SAE 0W-40 provides superior protection for your engine, ensuring longevity and reliability.
Superior Performance Under Severe Conditions: This engine oil offers exceptional deposit protection and performance even under severe service conditions, making it ideal for high-stress driving environments.
Versatile Compatibility: Meets the performance requirements of American, Japanese, and European gasoline or diesel-fueled passenger cars, light trucks, sport utility vehicles, and gasoline-electric hybrids.
Exceeds Modern Engine Standards: Exceeds the demanding engine performance requirements of today’s modern, higher revving sports, performance, and luxury vehicles, while also protecting turbochargers and emission control system catalysts.

from

$27.99

FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability, lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Ultimate engine protection: FRAM Full Synthetic 0W20 5 QT is specifically formulated to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine.

from

$9.49

Castrol® GTX® High Mileage 10W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards your vehicle’s emission system while meeting API SP/SN PLUS/SM and ILSAC GF-6 standards. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional oil burn-off protection that exceeds industry standards, and advanced additives to minimize engine wear. Its seal conditioners help reduce leaks, making it ideal for aging engines, while its formulation supports improved fuel economy in 10W-30 grades. Engineered to deliver reliable performance, this motor oil ensures your engine stays cleaner, runs smoother, and lasts longer, all in a convenient 1-quart size.

Product Features:

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Meets or exceeds the following specifications:
API SP/SN PLUS/SM
ILSAC GF-6

from

$24.99

FRAM Engine Oil SAE 5W-30 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control.
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$27.99

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation & shear stability over previous oil categories.

Product Features:

Outstanding thermal and oxidation stability.
Excellent sludge and varnish protection
Faster oil flow at start-up
Volatility: Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

from

$24.99

FRAM Engine Oil SAE 20W-50 utilizes a blend of high quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control.
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$29.99

Castrol® GTX® 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

Premium-quality base oils and anti-wear additives that help extend engine life
Superior protection against engine sludge
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C961-A1
Meets Ford WSS-M2C946-B1

from

$25.99

Super 10W-30 Synthetic Blend Engine Oil delivers proven protection to ensure long engine life and optimal performance. Designed to combat sludge and deposits for up to 5,000 miles, this advanced synthetic blend features 15 percent extra cleaning additives to keep your engine running clean and smooth. Its enhanced formulation provides outstanding wear protection under various operating conditions while maintaining oil viscosity for easier cold starts. Ideal for gasoline cars and light-duty trucks, this oil is a reliable choice for drivers seeking durability and efficiency. With its ability to safeguard your engine and extend its lifespan, this 5-quart solution offers exceptional value and peace of mind for everyday driving.

Product Features:

Product Features:

Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
Works to provide outstanding engine wear protection under a variety of operating conditions
Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
Recommended for gasoline cars and light-duty trucks

from

$6.49

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Specially formulated for high mileage engines: FRAM High Mileage 10W30 is designed with enhanced additives to help reduce leaks & oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.

Most Popular 2024 Jeep Grand Wagoneer Motor Oils

Customize your Jeep with 6 Motor Oil products like Engine Oil, all priced under $27.99.

show more show less

from

$11.99

Castrol EDGE Euro 0W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

Product Features:

1.5X Better viscosity control to help engines run better for longer (1)
1.5X Better piston cleanliness to help maximize engine performance (2)
(1) As measured in DV6 test vs. test limits
(2) As measured in EP6CDT test vs. test limits
Approved and licensed specifications:
ACEA A3/B4
API SP
MB-Approval 229.5
BMW Longlife-01
Porsche A40
Renault RN0700 / RN710
VW 502 00 / 505 00
Meets Ford WSS-M2C937-A

from

$27.99

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability, lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Ultimate engine protection: FRAM Full Synthetic 0W20 5 QT is specifically formulated to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine.

from

$27.99

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Reduces oil cumsumption
Excellent sludge and varnish protection
Slows engine leaks
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$7.49

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability, Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 0W-20 is formulated with high-quality synthetic base stocks and the latest additive technology to meet stringent API and ILSAC specifications, ensuring top-tier protection for your engine.
Advanced LSPI Prevention: Specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, reducing the risk of premature engine failure.
Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, offering broad application across various engine types.
GM dexos1 Gen 2 Licensed: Fully licensed as GM dexos1 Gen 2 motor oil, ensuring it meets the high standards required for modern engines, including those from General Motors.

from

$7.49

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Reduces oil cumsumption
Excellent sludge and varnish protection
Slows engine leaks
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$7.49

Exceptional Film Strength.
Excellent Protection for Metal Components from Rust, Corrosion and Wear.
Superior Oxidation Stability.
Outstanding Shear Stability.
Improved fuel economy.
Reduces fuel costs without sacrificing engine protection.
LSPI (Low Speed Pre-Ignition) Protection Throughout the Drain Interval.
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: Formulated with the latest additive technology, FRAM Engine Oil Full Synthetic SAE 0W-40 provides superior protection for your engine, ensuring longevity and reliability.
Superior Performance Under Severe Conditions: This engine oil offers exceptional deposit protection and performance even under severe service conditions, making it ideal for high-stress driving environments.
Versatile Compatibility: Meets the performance requirements of American, Japanese, and European gasoline or diesel-fueled passenger cars, light trucks, sport utility vehicles, and gasoline-electric hybrids.
Exceeds Modern Engine Standards: Exceeds the demanding engine performance requirements of today’s modern, higher revving sports, performance, and luxury vehicles, while also protecting turbochargers and emission control system catalysts.

2024 Jeep Grand Wagoneer Oil and Lubricants

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

FRAM – High Mileage 10W-40 Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)

FRAM – 10W-40 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F640-5QT)

FRAM – High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F913-5QT)

Castrol – Edge 10W-30 Full Synthetic Motor Oil, 3X Stronger Protection, 1 Quart (Part No.152E4E)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, Protects Against Sludge, 5 Quart (Part No.15980E)

Quaker State – Ultra Durability 0W-20 Full Synthetic Motor Oil, Strong Engine Performance, 5 Quart (Part No.550046181)

Castrol – Edge High Mileage 10W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart (Part No.15906F)

FRAM – High Mileage 5W-30 Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F660)

FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)

Pennzoil – Platinum 0W-20 Full Synthetic Motor Oil, Maximizes Engine Protection, 5 Quart (Part No.550046127)

Pennzoil – Extended Care 0W-20 Full Synthetic Motor Oil, Prevents Sludge, 1 Quart (Part No.550053458)

FRAM – Small Engine 10W-30 Conventional Engine Oil, Ideal for Lawn Equipment, 1 Quart (Part No.464-32)

FRAM – High Mileage 10W-30 Conventional Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F665-5QT)

Pennzoil – 0W-20 Full Synthetic Motor Oil, Helps Prevent Sludge Build-Up, 5 Quart (Part No.550058596)

FRAM – High Mileage 5W-30 Conventional Motor Oil, Restores Seals, 5 Quart (Part No.F660-5QT)

FRAM – 5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart (Part No.F930-5QT)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, Protects Against Sludge & Wear, 1 Quart (Part No.149D6A)

Castrol – Edge 5W-30 Full Synthetic Motor Oil, Superior Wear Protection, 5 Quart (Part No.1598B1)

FRAM – 0W-40 Full Synthetic Motor Oil, Exceptional Film Strength, 1 Quart (Part No.F904)

FRAM – 0W-20 Full Synthetic Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.F900-5QT)

Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart (Part No.149D6C)

FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F620-5QT)

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quart (Part No.F940-5QT)

FRAM – 20W-50 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F650-5QT)

Castrol – GTX 5W-30 Synthetic Blend Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.15A66D)

Mobil Super – Super 10W-30 Synthetic Blend Engine Oil, Proven Engine Protection, 5 QT (Part No.98008)

FRAM – High Mileage 10W-30 Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F665)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

Castrol – Edge 0W-40 Full Synthetic Motor Oil, Exceeds Manufacturer Standards, 1 Quart (Part No.15B5FD)

FRAM – 0W-20 Full Synthetic Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.F900-5QT)

FRAM – High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F913-5QT)

FRAM – 0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart (Part No.F900)

FRAM – High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F913)

FRAM – 0W-40 Full Synthetic Motor Oil, Exceptional Film Strength, 1 Quart (Part No.F904)