2024 BMW 740i Brake Parts

Essential Brake Parts for 2024 BMW 740is

ATE – ATE Caliper Guide Pin Cover (Part No.N1046316132ATE)

ATE Caliper Guide Pin Cover

from

$1.85
The ATE Caliper Guide Pin Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

Caliper Pin Boot Kit

from

$20.00
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

Zimmermann – Brake Disc (Part No.N1000670571ZIC)

Brake Disc

from

$246.92
Brake Disc

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141816)

Brake Rotor: Meets or Exceeds OE Specs

from

$112.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time.
See More

Carquest Platinum Painted – Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield (Part No.YH583319P)

Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield

from

$122.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance. PLEASE NOTE: Directional cooling vanes to match original equipment â¿¿ Double check fitment

Product Features:
  • Engineered to withstand 120 hours of salt spray testing
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
  • PLEASE NOTE: Directional cooling vanes to match original equipment â¿¿ Double check fitment
  • PLEASE NOTE: Directional cooling vanes to match original equipment Γ┐┐ Double check fitment
See More

Pilenga – BiMetallic Coated Brake Disc (Rotor) (Part No.N1000385168PIC)

BiMetallic Coated Brake Disc (Rotor)

from

$233.40
Pilenga Brake Discs, 100% Made in Italy. Pilenga Bimetallic brake rotor feature steel discs attached to an aluminum hub, significantly reducing the weight of the disc assembly. The light weight bimetallic disc provides a reduction of inertial forces, increased acceleration, enhanced braking performance and reduced vehicle emissions. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended disc life and improved visual appearance. Pilenga manufactures OE-quality brake discs that assures maximum performance and enhanced driving comfort, providing the same levels of quality, technology and performance that are found in many of the OEM fitments. With enhanced thermal inertia, Pilenga high carbon discs reduce both vibration and noise. Pilenga’s meticulously controlled production process makes it possible to precisely contrast the chemical composition of the cast iron, maximizing the percentage of carbon in the discs.

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Excellent braking performance.
  • Attractive appearance (strong visual impact combined with alloy wheels)
  • Eco-Friendly long lasting corrosion resistance
  • High carbon content
  • No reduction in friction coefficient with Pilenga coated brake discs
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000120514ZIC)

Coat-Z Brake Disc (Rotor)

from

$88.37
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000120514WBC)

Run-True Metallurgic-Gray Coated Brake Disc (Rotor)

from

$81.73
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
  • High metallurgical and machining standard to improve stopping distances
  • Produced to match OE design fitment – G 3000 gray iron
  • Mill balanced
  • TS16949 certified
  • Non-directional finish provides smooth vibration free performance
  • No need for machining prior to installation
  • Durable Metallurgic-Gray finish to all outward non-friction surfaces
  • Metallurgic-Gray anti-rust protection to help maintain a clean appearance
  • Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
  • Designed to minimize brake fade and extend pad and rotor life
See More

Zimmermann – Brake Disc (Part No.N1000670572ZIC)

Brake Disc

from

$245.46
Brake Disc

Carquest Wearever – Brake Rotor Meets or Exceeds OE Design (Part No.YH141632)

Brake Rotor Meets or Exceeds OE Design

from

$83.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

Brembo – Premium UV Coated OE Replacement Brake Disc (Rotor), High Carbon (Part No.N1000457080BRC)

Premium UV Coated OE Replacement Brake Disc (Rotor), High Carbon

from

$127.32
The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. Brembo UV Coating Technology : Environmentally friendly, solvent free UV coating offers superior protection of the disc, including braking plate surfaces. Includes new intelligent marking location for immediate control of the minimum thickness. High Carbon Discs: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brands foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs. PVT pillar venting technology: ( Vented Rotors Only ) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:
  • Metallic finish that maintains a clean and bright appearance over the entire life span of the disc
  • Protective coating on braking plate surfaces, external diameter and disc hub to ensure complete protection
  • New location for minimum thickness control with greater ease of reading for service professionals
  • Water-based paint free of chemical solvents – Energy efficient UV coating process
  • Superior to products currently on the market proven by resistance to: Salt spray testing, Humidity and High temperatures BREMBO UV COATED DISCS BROCHURE
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000457080ZIC)

Coat-Z Brake Disc (Rotor)

from

$134.55
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N1000457080BOS)

QuietCast Premium Brake Disc (Rotor)

from

$138.37
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Prevent rust and corrosion with clear-look coating protection
  • Provide a clean look for today’s open-wheeled vehicles
  • Are 100% balanced for smooth operation
  • Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
See More

Carquest Platinum Painted – Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield (Part No.YH583318P)

Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield

from

$122.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance. PLEASE NOTE: Vanes are directional for cooling purposes â¿¿ Double check fitment

Product Features:
  • Engineered to withstand 120 hours of salt spray testing
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
  • PLEASE NOTE: Directional cooling vanes to match original equipment â¿¿ Double check fitment
  • PLEASE NOTE: Directional cooling vanes to match original equipment Γ┐┐ Double check fitment
See More

PowerStop – Evolution Performance Drilled, Slotted Plated Brake Rotor Pair (Part No.EBR421XPR)

Evolution Performance Drilled, Slotted Plated Brake Rotor Pair

from

$234.99
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.

Product Features:
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Precision cross-drilled for maximum cooling and optimum performance
  • Slotted friction surface sweeps away gasses, dust, and water
  • Chamfered drill holes and rounded slots to minimize stress cracking
  • Zinc plated for protection against corrosion
  • Manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • Weight and vane count match original equipment design
  • 100% dynamic mill balanced
  • Sold as a pair
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14166)

Disc Brake Caliper Guide Pin Kit

from

$18.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5089)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
See More

ATE – ATE Caliper Guide Pin (Part No.N1045310493ATE)

ATE Caliper Guide Pin

from

$10.68
The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Oversized Brake Caliper Bolt

from

$25.49
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles.
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 2024 BMW 740i with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 2024 BMW 740i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Brake Parts are key to keeping your 740i functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Brake Parts for the 2024 BMW 740i, designed to meet your needs without breaking the bank. From Brake Caliper replacements to Brake Rotors and Drums upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 2024 BMW 740i at great prices. Our Brake Parts inventory for this model ranges from just $1.85 to $163.46, with an average price of $41.39. Our 5 Brake Parts in stock come from 2 trusted brands, so you’re sure to find the right part for your 2024 BMW 740i without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Filters and PCVs, Exhaust Parts and more to make sure your 2024 BMW 740i is always ready to roll. We’re committed to providing you with everything you need to keep your 740i in top shape, all in one place. Start shopping confidently below for your 2024 BMW 740i!

Best-Selling Brake Calipers for 2024 BMW 740is

Enhance the driving experience in your BMW with 4 quality Brake Caliper components, starting at $1.85.

Autopart International Inc – Caliper Guide Pin (Part No.N10451913325API)

Caliper Guide Pin

from

$10.95
Caliper Guide Pin

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

Caliper Pin Boot Kit

from

$20.00
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

ATE – ATE Caliper Guide Pin (Part No.N1045310493ATE)

ATE Caliper Guide Pin

from

$10.68
The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATE – ATE Caliper Guide Pin Cover (Part No.N1046316132ATE)

ATE Caliper Guide Pin Cover

from

$1.85
The ATE Caliper Guide Pin Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Most Popular 2024 BMW 740i Brake Rotors and Drums

Customize your BMW with 1 Brake Rotors and Drums products like Front Brake Rotors, all priced under $163.46.

Autopart International Inc – BRAKE DISC (Part No.N10001907418API)

BRAKE DISC

from

$163.46
BRAKE DISC

FAQs for 2024 BMW 740i Brake Parts

Which Brake Parts are best-sellers for 2024 BMW 740is?

Out of 5 Brake Parts that fit 2024 BMW 740is, the following parts are the top sellers:

What’s the price range for 2024 BMW 740i Brake Parts?

Brake Part prices for the 2024 BMW 740i start at $1.85 and go up to $163.46 for the most premium parts.

What’s the average price of a Brake Part for a 2024 BMW 740i?

The average price for Brake Parts for the 2024 BMW 740i is $41.39. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other BMW 740i model years?

Yes, we currently carry Brake Parts for 22 model years of BMW 740is between 1993 and 2025. Brake Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Brake Parts for my 2024 BMW 740i?

The cheapest 2024 BMW 740i Brake Parts we carry in stock are:

What types of Brake Parts do you sell for my 2024 BMW 740i?

Can I get help with 2024 BMW 740i Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Brake Parts and more.

What is your return policy for BMW 740i Brake Parts?

Advance Auto Parts keeps returns simple. For new BMW 740i Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.