from

$46.49

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$62.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$44.56

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$41.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Necessary hardware supplied as needed for a complete installation
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$79.49

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$78.09

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$46.49

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$65.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Easy to install.
Construction and design validated by MOOG engineers
Restores like-new steering and handling
Designed to meet or exceed original equipment performance
Broad coverage for foreign and domestic applications
Engineered to provide long life and dependability

from

$29.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$47.99

Advanced corrosion-resistant electro-coating to reduce rust

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$39.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$17.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$62.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$58.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$31.28

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi tie rods are fatigue tested to avoid failure
Delphi includes the necessary accessories for a complete job
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$6.23

FEQ tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. FEQ tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$13.06

Tie Rod End

from

$31.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$53.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats ensure easy installation and removal
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$32.49

Sway Bar Link Kit

from

$19.65

The Febi Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$21.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$21.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Corrosion resistant coatings
Includes components and hardware necessary for a complete replacement
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$16.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$20.79

DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

from

$32.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$6.97

Sway Bar Link

2023 Volkswagen Golf Steering and Chassis Parts

Carquest Premium – Ball Joint (Part No.410-234680)

MOOG – Ball Joint (Part No.K90355)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020461525LEM)

Beck/Arnley – Ball Joint Front Lower (Part No.101-3825)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444924LEM)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444925LEM)

Carquest Premium – Ball Joint (Part No.410-234681)

MOOG – Ball Joint (Part No.K500391)

Rein – Ball Joint (Part No.SCB0134R)

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.700-234677)

Rare Parts – Tie Rod End (Part No.RP27245)

Rein – Tie Rod End (Part No.SCE0152R)

Beck/Arnley – Inner Tie Rod End (Part No.101-4889)

MOOG – Tie Rod End (Part No.ES80666)

Delphi – Tie Rod End (Part No.M3010405634DEL)

First Equipment Quality – FEQ Tie Rod End (Part No.M3010124701FEQ)

International Suspension Group – Tie Rod End (Part No.M301026708ISG)

Beck/Arnley – Tie Rod End (Part No.101-4913)

Whiteline – Sway Bar Link (Part No.KLC167A)

MOOG – Stabilizer Bar Link (Part No.K80478)

Driveworks – Sway Bar Link Kit (Part No.DW-K80478)

Febi – Sway Bar Link (Part No.L1030324555FEB)

MOOG – Stabilizer Bar Link (Part No.K90435)

Beck/Arnley – Stabilizer Link Kit (Part No.101-4877)

Rein – Sway Bar Link (Part No.SCL0317P)

Driveworks – Sway Bar Link Kit (Part No.DW-K90435)

MOOG – Stabilizer Bar Link (Part No.K90715)

International Suspension Group – Sway Bar Link (Part No.L103063224ISG)

Delphi – Tie Rod End (Part No.M3010405633DEL)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444924LEM)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444925LEM)

Carquest Premium – BALL JOINT (Part No.410-18030)

Carquest Premium – BALL JOINT (Part No.410-18031)

Carquest Premium – Stabilizer Bar Link (Part No.644-01562)

MOOG – Stabilizer Bar Link (Part No.K750809)

Febi – Sway Bar Link Nut (Part No.L1038413440FEB)

Febi – Sway Bar Link Nut (Part No.L1038422923FEB)