2023 Ram 3500 Differentials

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

aFe POWER Pro Series front and rear differential covers bring performance-driven protection to your drivetrain. Constructed from durable cast aluminum and designed with reinforced ribs, these covers offer enhanced strength and improved heat dissipation for demanding driving conditions. This is a complete, ready-to-install kit that includes front and rear differential covers, all necessary hardware, and 8 quarts of 75W-90 premium PROGUARD Synthetic gear oil -everything you need for a full service in one convenient package. The supplied gear oil exceeds the performance requirements of API GL-5 recommended for both open and limited slip applications. These covers have an increased oil capacity over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. This system incorporates magnetic drain and deep reach fill plugs to capture loose particles for maximum protection. Each cover uses a calibration plug set to the factory oil level to eliminate overfilling. Each cover includes an oil level sight glass that allows for quick and easy oil inspection.

“aFe POWER differential covers bring performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. All necessary hardware is included for easy installation. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum rear-end protection. Also included is a 1/8″” NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.”

aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with black powder-coating and machined fins for a distinctive look.Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration.Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling.Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection.Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling.Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection.When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

“aFe POWER differential covers bring performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. All necessary hardware is included for easy installation. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum rear-end protection. Also included is a 1/8″” NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.”

aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. This cover has a raw finish with machined fins for a distinctive look.Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration.Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling.Magnetic Plug: This system incorporates a magnetic drain plug to capture loose particles for maximum protection.Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling.Optional Accessories Available: Our optional oil level sight glass (Part Number: 46-00001) and deep reach magnetic fill plug (Part Number: 46-00002) are great additions to combine with this cover.When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Volume: 1 quart.

Choosing an automatic transmission fluid just got easier. Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the #1 ATF product, is suitable for use in 95% of ATF vehicles in operation with US registered light duty applications. And now, it€™s also recommended for most belt and chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it€™s designed to help prevent leaks, reduce wear and tear, and maximize performance €“ all for much longer than conventional fluids. It has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Whether your vehicle has a CVT or traditional automatic, Valvoline MaxLife Multi-Vehicle ATF is suitable for a broad range of transmissions including Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW and Audi vehicles. It€™s specifically recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC. For the many miles ahead, trust your transmission with Valvoline, the #1 automatic transmission fluid brand.

Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula keeps your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Driveworks Tapered Roller Bearing, S-39250.

The shaft and components in this front inner axle disconnect kit are designed to match the performance of the original equipment on specified 4WD Ram 2500 and 3500 trucks. The precision-engineered shaft is pre-assembled to save installation time and hassle, and has been rigorously tested for fit and durability to help restore and ensure consistent power delivery to the wheels.